Deep AC cleaning
AC cleaning in Southern Housing
In Southern Housing, south of Jeddah, closely spaced residential units and high-density apartment blocks predominate. AC cleaning here is a constant need because the tightly built blocks and poor natural ventilation increase dust and humidity accumulation.
- Protective bag
- Clean coil
- Clear drain
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
When your AC needs a deep clean
- 1
Musty smell when you switch on
Jeddah's high humidity creates ideal conditions for mould on the drain pan and evaporator fins. If you notice a sharp smell the moment the unit starts, the most common cause is mould built up inside the indoor unit.
- 2
Weak cooling from a working unit
A thin layer of dust on the evaporator fins reduces heat transfer noticeably. A dirty blower wheel cuts airflow without any fault in the compressor or refrigerant. Cleaning restores the unit's performance to what it was.
- 3
A unit that has not been cleaned in a long time
Jeddah's heavy dust and salt-laden sea air build up on the outdoor coil and block airflow paths. The unit runs but the compressor works harder than it should; cleaning both coils together reduces that load.
Who it's for
Mould smell bothering your family
We clean the evaporator, blower wheel and drain pan in your home unit with a protective bag keeping your furniture and walls dry.
Ask on WhatsAppYour office AC cooling has weakened
We strip the indoor unit, wash every component and check the outdoor coil so the unit performs as it did, with minimal disruption to your working day.
Ask on WhatsApp
What the cleaning covers
- Protective bag fitted first
- Air filter and evaporator fins
- Blower wheel and drain pan
- Drain line cleared and checked
- Outdoor coil and condenser fins
How we work
How we work
- 1
Tell us the unit type
WhatsApp us the unit type, how many units and your district, and we will book a time that suits you, Saturday to Thursday.
- 2
Protect the room and open the unit
We fit the protective bag under the indoor unit to collect wash water, then remove the cover, filter and blower wheel to reach the evaporator and drain pan.
- 3
Pressure wash and sanitise
We wash the evaporator, blower wheel and drain pan at the right pressure with a sanitising agent, then check the drain flows cleanly before reassembly.
- 4
Outdoor coil and start-up
We move to the outdoor unit, clear dust and salt deposits from the coil and condenser fins, then run the AC and confirm airflow and cooling before we leave.
A thorough clean or a quick wipe?
| Alrabih | The usual way | |
|---|---|---|
| Protective bag | Fitted before washing | Usually skipped |
| Blower wheel | Removed and washed | Wiped on the outside |
| Drain line | Checked and cleared | Left untouched |
| Outdoor coil | Cleaned as part of the job | Left for another visit |
| Drain pan | Washed and sanitised | Dry-wiped only |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Southern Housing is a dense urban zone with closely spaced apartment blocks and multi-unit flats, narrow streets and minimal gaps between buildings. This pattern means natural ventilation is severely limited, and hot, humid air stays trapped between blocks longer. As a result, dust and humidity accumulate on the evaporator coil faster than in less dense areas, and mould grows quickly in the drain pan.
Southern Housing lies south of Jeddah and is characterised by dense apartment blocks, organised flats and narrow streets.
Most flats here have separate split units, with outdoor units mounted on building roofs in confined spaces.
The AC setup in Southern Housing
- 1
Separate split unit per flat
Each flat has its own unit, with outdoor units mounted on shared building roofs.
- 2
Outdoor units on building roofs
Outdoor units are mounted on shared roofs to save space and ensure access.
- 3
Confined space around units
Roofs are tight and units are close together due to high density, reducing ventilation around the units.
Before the visit
Before our visit in Southern Housing
- 1
Coordinate with management or flat owner
Tell the building management or flat owner about the visit time in advance to facilitate roof and corridor access.
- 2
Confirm safe roof access
Check that internal stairs and roofs are safe and clear of obstacles before the visit.
- 3
Locate the outdoor unit on the roof
Describe your outdoor unit's location on the roof relative to other buildings and units to ease access.
More districts for AC cleaning
Other services in Southern Housing
FAQ
Questions about AC cleaning
Will the wash water stain my furniture or ceiling?
We fix a sealed protective bag under the indoor unit before any pressure washing begins. The bag collects all the wash water and channels it away from your wall and furniture. This step is not optional in how we work.
Will the mould smell disappear completely after cleaning?
In most cases the smell goes once the evaporator, blower wheel and drain pan are washed with a sanitising agent. If the smell comes from very old build-up or a drain line problem, we diagnose the cause on site and tell you exactly what is needed.
How does Jeddah's dust and salty air affect the outdoor coil?
Heavy dust and salt carried by sea air collect between the condenser fins and block airflow. This raises condensing pressure and makes the compressor work harder than it was designed to. Cleaning the outdoor coil regularly keeps the compressor performing as it should and extends its life.
Can you clean a window unit the same way?
Yes, a window unit needs similar work: filter, evaporator, blower wheel and drain pan, plus the outdoor coil built into the same casing. The difference is in how it is opened and accessed, which the technician works out after seeing where the unit is installed.
Can cleaning fix water dripping from the indoor unit?
Dripping usually comes from a blocked drain pan or a drain line that does not slope correctly. Cleaning the pan and checking that the line has the right fall resolves the problem in many cases. If the cause is different, the technician diagnoses it on site and explains exactly what is needed.
Closely built blocks reduce airflow, how often should I clean?
Limited ventilation speeds up dust accumulation. We recommend cleaning at least every two months in Southern Housing.
The outdoor unit is on the roof, how do you reach it in the apartment block?
We use the internal stairs and designated roofs. We coordinate with you or the building management to ease access.
Does humidity between blocks increase mould growth?
Yes, humid air trapped between blocks causes rapid mould on the coil and drain pan. Regular cleaning removes it.
Do I need to coordinate with building management?
Yes, we recommend informing the building management before the visit to facilitate roof and corridor access.
