Central AC installation in Al Hamra

We calculate the thermal load for each zone based on its area, ceiling height, number of external openings, orientation and how it will be used. In Jeddah the sun's effect on west-facing facades is significant, and high humidity goes into the calculation. We choose the unit size after this calculation, not before.

We fabricate round and rectangular ducts in our own workshop from G90 galvanised sheet or aluminium sheet depending on what the project needs. This lets us cut ducts to the exact site dimensions and fit them tightly, avoiding ill-fitting sections that leak air and raise electricity consumption.

We use Mueller copper in runs of up to 30 metres without welded joints, which reduces potential leak points. If a run exceeds that, the survey determines whether the outdoor unit position needs rethinking or whether the refrigerant charge needs adjustment according to the type shown on the unit's nameplate.

Yes, and it is settled at the design stage. Each floor can have its own unit, or the network can be split into zones with dampers and a thermostat in each, so you do not cool the whole upper floor while the family sits in the majlis. We recommend the right option after the load calculation.

Yes, and the roof surface determines what kind of base is needed. For villas we fabricate a raised steel frame that keeps the unit clear of pooled rainwater and allows airflow beneath it. The exact height and angle depend on the roof pitch and the condensate drain position, which the site survey establishes. The aim is to keep the unit level and to prevent vibration movement during operation.

Yes, we conceal ducts entirely within suspended ceilings or architectural voids, with only clean-designed air outlets visible. We place the outdoor unit away from main façades to preserve the external appearance.

Yes, we design advanced central systems with separate smart controls per floor or zone, including remote monitoring and adjustment via smartphone.

We select premium units like Carrier and YORK designed for coastal climates. We recommend periodic maintenance for cleaning and salt-humidity protection, especially in Al Hamra which is closer to the coast.

We calculate total thermal load and floor area, then recommend the appropriate number of units. A luxury mid-rise may need one large unit or more, depending on flat count and available electrical capacity.