Cold room installation in Al Riyadh

Size depends on the type and quantity of stock, how often fresh goods come in and how many times the door opens each day. These factors together set the dimensions and the cooling unit capacity needed, which is why we do not suggest a size before the site visit.

The condensing unit needs enough air around it, distance from heat sources and a spot a technician can reach for servicing. We decide the best location at the site survey based on the building layout and how the space is used.

A well-insulated room with a tight door holds its cold for a limited time if the door stays shut, and longer the thicker the insulation and the better the seal. So we choose the panel thickness and the door seal with care, and set the controller to raise an alarm when the temperature rises, so you can act before stock spoils.

A chiller room works above freezing and suits vegetables, medicines, dairy and baked goods. A freezer room works below freezing and needs thicker insulation, an insulated floor, a heated door frame and a defrost system. If you need freezing or a combined room, we offer that as a dedicated service.

In most cases yes. Insulated panels are assembled inside the existing space without demolition or construction work, and the condensing unit is fixed in a suitable spot the technician identifies at the survey. Ceiling type and building ventilation may affect the details, and we confirm those after seeing the site.

Clinic cold rooms require more precise and stable temperature control, so we select units capable of holding specific temperatures within tight limits.

Yes, we fit a self-closing sealed door and select a condenser powerful enough to compensate for heat loss from repeated openings.

Yes, we specify rust and corrosion-resistant components, and recommend inspections every two months to ensure wiring and connections are sound.

It depends on the generator's capacity and other loads on it, which we discuss at the site visit to calculate actual requirements.