Freezer and dual-temp rooms
Cold & freezer room installation in Al Bahjah
Cold and freezer room installation in Al Bahjah serves modern restaurants, cafés and shops needing secure storage for drinks, fresh items and frozen goods. Alrabih's team designs the room with tight insulation and advanced defrost systems to keep products in pristine condition.
- Frost-proof floor
- Auto defrost
- Two-zone layout
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Who needs a specialist freezer room?
- 1
Stock that needs sub-zero cold
Meat, poultry, fish and ice cream spoil if the temperature rises even briefly above the required level. A freezer room is built to hold that level continuously, not simply to cool.
- 2
One room, two temperature zones
Large restaurants and hotels usually need a chiller section and a freezer section side by side. We build both wings with separate insulation, independent refrigeration units and an insulated inner door, so neither zone affects the other's temperature.
- 3
Expanding an existing facility
If your current cold room no longer holds all your stock, or you need to add a freezer section beside it, we survey the site and propose the most practical way to expand with as little disruption to your operation as possible.
Who it's for
Opening a restaurant that needs a freezer room
We survey your kitchen and build the freezer room with frost-rated insulation panels, an insulated floor and a tight-sealing door.
Ask on WhatsAppNeed a chiller wing and a freezer wing together
We build both wings with separate insulation, independent refrigeration units and an insulated inner door between them.
Ask on WhatsApp
What the installation covers
- Freezer-rated insulation panels
- Insulated floor vapour barrier
- Heated frame tight-sealing door
- Evaporator with electric defrost
- Condensing unit temperature controller
How we work
How we work
- 1
Site survey
We visit the site, learn the stock type and required temperature, measure the available space, and decide the right insulation thickness and refrigeration system from what we find.
- 2
Design and supply
We draw the room layout including pipe and cable routes, then have the panels, doors and equipment ready before installation begins.
- 3
Installation and connection
We fit the panels, insulated floor and door, then run and insulate the copper pipes, vacuum the line and pressure-test it before starting the system. Mueller copper in runs of up to 30 metres without welded joints where the layout calls for it.
- 4
Start-up and handover
We run the system and watch the room reach its target temperature, confirm the defrost cycle works and the door seals properly, then explain the controls to the person responsible for the facility.
Specialist install or an unconsidered one?
| Alrabih | The usual way | |
|---|---|---|
| Floor | Insulated with vapour barrier | Plain floor that cracks |
| Door frame | Heated to prevent seizure | Freezes and warps |
| Evaporator | Scheduled electric defrost | Ice blocks the airflow |
| Insulation | Thickness set at survey | Same thickness for every room |
| Anteroom | Buffer zone reduces air ingress | Direct door into freezer |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Al Bahjah is relatively modern, with high-rise residential buildings, commercial shops and several small-to-medium restaurants and cafés. The shops and cafés here focus on quality and modern standards, needing freezer rooms with precise temperature control and easy access. The nearby residential environment means noise and vibration from the outdoor unit may be an issue, so we choose relatively quiet units. Coastal humidity may affect the outdoor unit if not properly protected.
Al Bahjah lies in north-east Jeddah, a modern district with high-rise residential buildings, contemporary cafés and shops.
Freezer rooms in modern cafés and shops here typically range from 4 to 10 square metres, with cooling units of 1.5 to 3 tonnes capacity and relatively low noise output.
The AC setup in Al Bahjah
- 1
Single-temperature chiller with quiet unit
Modern cafés and shops often need a single-temperature chiller at 2-4°C for drink and fresh item displays with a low-noise cooling unit.
- 2
Compact two-zone room in tight space
Some modern cafés want chilling and freezing in one room divided internally to save floor space.
- 3
Outdoor unit mounted away from residential windows
The outdoor unit is positioned away from residential windows as much as possible, with building management and neighbour approval.
Before the visit
Before our visit in Al Bahjah
- 1
Get written building management approval
Before the visit, obtain written building management approval for the outdoor unit location, runs and any potential noise.
- 2
Measure interior space and electrical obstacles
Measure room dimensions, ceiling height and locate electrical wires and existing pipes so they do not interfere with the new room.
- 3
Agree on outdoor unit location and access for maintenance
Decide the outdoor unit location and ensure it is accessible for routine maintenance and cleaning.
More districts for Cold & freezer room installation
Other services in Al Bahjah
FAQ
Questions about Cold & freezer room installation
Why does a freezer room need an insulated floor when a chiller often does not?
At sub-zero temperatures the moisture held in a concrete slab freezes and expands, cracking tiles and lifting bases over time. A chiller room operates above freezing, so ice crystals do not form in the slab. A freezer room therefore requires insulated panels under the floor together with a vapour barrier that blocks rising ground heat and protects the structure over the long term.
What is the difference between electric defrost and other types?
Electric defrost uses heating elements fixed inside the evaporator coil; they warm the coil directly and melt frost build-up. Hot-gas defrost instead redirects warm refrigerant from the compressor back through the same coil. The choice between the two depends on room size, the required number of cycles and the type of goods stored; the site survey determines which method suits each installation.
Can two zones at different temperatures share the same footprint?
Yes. A partition of insulated panels separates the space, with each side using a panel thickness matched to its required temperature differential. Each zone has its own refrigeration unit and a door with a heated frame to prevent condensation. This arrangement is widely used in meat and fish facilities that need a chiller zone for short-term stock and a freezer zone for longer storage. The final design depends on the available floor area and the heat load of each section.
Does the position of the condensing unit affect how the freezer room performs?
Position has a direct effect. The condensing unit needs clean air and adequate flow to reject heat; if it is placed in a confined space or near heat sources the condensing pressure rises and the compressor works harder. In Jeddah, outdoor air also carries salt and dust that accumulate on the condenser coil over time. The site survey identifies the best location and the copper-pipe route, keeping each Mueller copper pipe run within thirty metres without welded joints.
Does the position of the condensing unit affect how the freezer room performs?
Position has a direct effect. The condensing unit needs clean air and adequate flow to reject heat; if it is placed in a confined space or near heat sources the condensing pressure rises and the compressor works harder. In Jeddah, outdoor air also carries salt and dust that accumulate on the condenser coil over time. The site survey identifies the best location and the copper-pipe route, keeping each Mueller copper pipe run within thirty metres without welded joints.
My café is in a residential building, will the outdoor unit disturb the neighbours?
We select units with low fan speed and sound insulation around the outdoor unit if needed. The unit is positioned as far as possible from residential windows and building management approval is essential.
My shop is on the first floor of a modern commercial building, is the roof strong enough for the unit?
Modern buildings usually handle outdoor unit weight easily. We review the plans or ask building management to confirm the roof's structural capacity before mounting.
The climate here is humid coastal, might the outdoor unit rust?
Coastal humidity can accelerate rust in copper units. We specify corrosion-resistant coatings and recommend regular maintenance, including washing the outdoor unit every three months.
The shop is new with modern wiring, but what is the right circuit for the freezer room?
Freezer rooms need a dedicated 16-amp circuit minimum with safe breaker protection. We inspect the panel and recommend the best solution based on unit capacity.
