Balanced air distribution
AC duct installation in Al Qaws
In Al Qaws, east Jeddah, AC duct installation serves medium villas and residential apartment buildings with varied designs. Alrabih's team precisely sizes the pipes to balance cold air in every corner of villa or flat without thermal loss or excess noise.
- Sized branches
- Sealed insulation
- Clean return path
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
When you need a properly designed duct fit
- 1
One room cold, another warm
The unit runs but one room is too warm while the next is too cold. The cause is usually unbalanced branches or a diffuser that was never adjusted, not a fault in the unit itself.
- 2
Moisture and sweating on the ceiling
In Jeddah's humid air, uninsulated cold duct sweats on the outside and water collects on the plasterwork. Proper insulation with Armaflex or Kimmco stops the problem before it damages the ceiling finish.
- 3
Installing a concealed unit in a new build
The right time to fit duct properly is during the fit-out, before the false ceiling closes. We agree plenum dimensions, branch sizes and the return-air route at the survey before any work starts.
Who it's for
Fitting a concealed unit in your new villa
Before the false ceilings close, we design the plenums, branches and return-air route to suit the unit and each room in the villa.
Ask on WhatsAppSweating ceiling and uneven airflow in your building
We inspect the existing branches and return-air path, re-insulate the cold duct, and set the dampers so temperature evens out across every section of the building.
Ask on WhatsApp
What the duct installation covers
- Supply and return plenums
- Sized branch to each room
- Armaflex or Kimmco insulation
- Diffuser balancing with dampers
- Airflow check before ceiling closes
How we work
How we work
- 1
Site and unit survey
We measure the rooms and study the unit's data and plenum spec, and we settle the return-air route before deciding on branch sizes.
- 2
Design branches and plenum
We size each branch so it takes the right share of air without starving rooms farther from the unit, and we plan a return path with a correctly sized intake opening.
- 3
Fit and insulate
We fix the plenums and branches using SMACNA-standard duct, then insulate every cold surface with a sealed layer that stops sweating in Jeddah's high humidity.
- 4
Balance and hand over
We set each diffuser damper and check airflow in every room with you before the false ceiling is closed, then leave the site clean.
Designed duct or just connected duct?
| Alrabih | The usual way | |
|---|---|---|
| Branch sizing | Calculated per room | Connected without sizing |
| Return air | Routed with a sized intake | Left to chance |
| Duct insulation | Sealed against sweating | Thin or absent |
| Diffuser balance | Damper set per room | All diffusers fully open |
| Pre-closure airflow check | Done with you before closing | Faults found after ceiling closes |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Al Qaws is a developed residential district mixing medium villas and apartment blocks, with buildings designed modernly but with less openness than northern neighbourhoods. Ductwork must be efficiently integrated into walls and ceilings, eastern humidity demands strong insulation around cold pipes, and careful pipe routing and balancing are essential to avoid condensation and cold air waste.
Al Qaws sits in east Jeddah, a developed residential area with medium villas and modern apartment blocks.
Most villas and apartment blocks in Al Qaws have one or two central units with ductwork embedded in walls and ceilings.
The AC setup in Al Qaws
- 1
One central unit with unified ductwork
Most medium Al Qaws villas and apartment blocks rely on a single central unit with one unified duct network.
- 2
Two central units for separate wings
Some larger Al Qaws villas have two central units, each serving a separate wing.
- 3
Fully insulated ductwork with condensation protection
All cold pipes are wrapped in thick insulation and fitted with safe drainage to remove condensation water.
Before the visit
Before our visit in Al Qaws
- 1
Confirm easy access to ceilings and walls
Let us know if there is furniture or décor that is hard to move and blocks our access to walls and ceilings.
- 2
Decide on the central unit location or locations
Decide where the unit will go (mechanical room, roof, yard) before we start the design.
- 3
Verify electrical capacity
Check your main electrical panel and tell us the main breaker capacity.
More districts for AC duct installation
Other services in Al Qaws
FAQ
Questions about AC duct installation
Why does duct in Jeddah sweat more than elsewhere?
Jeddah's outdoor air carries high moisture because of its coastal location. When that air touches a cold duct surface, the moisture condenses immediately. Insulating with a thick enough layer of Armaflex or Kimmco, with all joints sealed, raises the outer surface temperature above the dew point and stops the sweating.
Does a longer branch deliver less air to the room?
Yes, a longer branch resists airflow more than a short one. This is why we size each branch individually, so near and far rooms receive balanced quantities of air, and we complete the adjustment with dampers during start-up.
How do you size the return-air opening?
The intake opening must be large enough so the unit does not work against negative pressure that strains it. We check the unit data and plenum requirements and decide size and position at the survey, because placing it behind a closed door or away from occupied areas changes the calculation.
Does a large room need more than one air outlet?
Usually, yes. A long majlis or a wide living room cannot be served by one outlet, because the air cools one end and leaves the other. We spread the outlets along the room, split the branch between them, and keep them away from the return grille so cool air does not go straight back to the unit.
Does the duct material affect sweating and airflow balance?
Yes. Sheet metal duct holds its shape under air pressure, so flow quantities stay as designed. Flexible duct can compress or sag, changing its cross-section and upsetting the balance. We therefore fabricate the main branches from galvanised sheet in our workshop and use flexible duct only for the shortest possible connection at each diffuser.
A medium villa, how many central units does it need?
One medium villa typically needs a single powerful central unit with ductwork distributing cool air to all wings, though some may prefer two for better comfort.
With ductwork embedded in walls, how do you prevent damage and leaks?
We carefully choose the duct route to avoid existing wires and pipes, use tight fittings and seal every joint.
Does east Jeddah's humidity affect duct performance?
Yes, high humidity can cause condensation on cold pipes if poorly insulated, so we use thick insulation and manage drainage carefully.
The unit, ductwork and fan, how much electrical current do they need?
We calculate the full system's electrical load and confirm the main breaker is adequate, and may recommend a stronger circuit for larger villas.
