Evaporative (desert) duct installation in Radwa

Evaporative cooling relies on water evaporation and weakens when humidity is high. In Jeddah, humidity is higher near the coast and lower inland. The survey decides whether the space and the season are suitable, which is why we do not start before visiting the site.

An evaporative cooler pushes fresh air in continuously. Without an exit path, humid air builds up inside and the felt temperature rises. Properly sized exhaust openings keep air moving through, not piling up, and that is the core of how this type of cooling works.

We use G90 galvanised steel sheet, which resists rust in Jeddah's humid and salty air. The duct sections are formed in our workshop before being taken to site, then hung on supports along the run to stop them sagging.

Duct can be branched from one unit to more than one outlet, but each branch reduces the airflow at every opening. The survey decides whether the cooler has enough output for the total area, or whether a separate unit for each wing is the better answer.

Evaporative cooling depends on continuous air movement and exchange, which requires exhaust openings in the same space the duct serves. A false ceiling restricts that flow unless dedicated openings lead air out of the building. The site survey decides whether the structure allows it, because the duct run and the exhaust are designed together as one system, not separately.

The system works well in open spaces, but direct heat and dust can reduce efficiency. The survey determines if you need additional cooling or sun shielding.

We use thermal insulation around the duct and cooler, and position the outdoor unit to minimise direct sun exposure.

Heat and eastern dust speed up filter clogging, so we recommend checking the filter every three weeks in summer.

Yes, high heat increases power use. Good design and insulation reduce strain on the cooler and running costs.