One contractor, whole plant
Operation & maintenance contracts in Al Hamdaniyah
Operation and maintenance contracts in Al Hamdaniyah provide comprehensive management of central AC systems in hotels, conference centres and hospitals. Alrabih's team monitors performance daily, implements preventive work and records every action clearly to keep services running.
- Daily operation
- Preventive maintenance
- Documented reports
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Who needs an operation and maintenance contract?
- 1
A facility without an in-house team
Hotels, factories and government buildings need someone daily to start chillers, watch pumps and log readings. Without a specialist team, a small fault grows before anyone notices.
- 2
A facility with repeated breakdowns
Repeated breakdowns usually point to missed preventive work: a blocked filter, a compressor running under load, a worn pulley in an AHU. A contract catches these causes before they become full failures.
- 3
A government or hotel project that requires records
Some government and hotel clients require operating logs and regular maintenance reports. We produce these on schedule and keep them available whenever you need them.
Who it's for
Managing a hotel where the HVAC plant runs all day
We handle daily operation of chillers, AHUs and pumps, and produce the reading logs and reports your hotel management requires.
Ask on WhatsAppRunning a factory where an HVAC stoppage halts production
We carry out preventive maintenance on compressors, coils and valves on schedule so your production line is not stopped in Jeddah's summer, and we repair any fault as soon as it appears.
Ask on WhatsApp
What the contract covers
- Daily chiller and pump operation
- Preventive equipment and duct maintenance
- Fault repair and parts replacement
- Performance testing and readings log
- Periodic facility management reports
How we work
How we work
- 1
Site survey and plant assessment
We visit the facility and record all HVAC equipment, assessing the condition of each unit before signing, because the scope depends on what the survey finds.
- 2
Agree scope and schedule
We set the preventive maintenance schedule with you, define the daily operating tasks and each party's responsibilities, and agree the format and frequency of reports.
- 3
Start operations and preventive work
Our team handles daily operation and carries out preventive work on schedule: cleaning coils, inspecting compressors, testing valves and manifolds, and logging readings each round.
- 4
Regular reports and ongoing follow-up
We send periodic reports covering work completed, observations and any parts replaced, so facility management stays fully informed about the plant's condition.
A full contract or repair-only calls?
| Alrabih | The usual way | |
|---|---|---|
| Accountability | One contractor follows all | No clear party |
| Fault detection | Before breakdown | After the equipment stops |
| Documentation | Regular logs and reports | No records kept |
| Major fault costs | Reduced by prevention | Arrive unplanned |
| Reading logs | Recorded every round | Left to operator if any |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Al Hamdaniyah is a relatively modern district housing large hotels, residential towers and commercial complexes with sophisticated central AC systems linking multiple floors and diverse zones. Regular maintenance is vital here because any chiller or pump failure in peak summer affects hundreds of guests and users, so a contract provides full coverage with regular inspections and rapid emergency response.
Al Hamdaniyah is in eastern Jeddah, a modern district of hotels and tall residential towers served by central cooling systems.
Most hotels and residential towers here use central chillers and complex pump systems distributing chilled water across multiple storeys.
The AC setup in Al Hamdaniyah
- 1
Central chillers with chilled-water distribution to each floor
Hotels and towers rely on a central chiller pumping chilled water through pipes to air handlers on each floor.
- 2
Thermal balancing system across different zones
Different hotel or tower zones need different temperatures, and the system balances distribution with valves and smart controls.
- 3
Electrical protection and monitoring sensors
Large chillers and pumps are protected by breakers and backup generators, with temperature and pressure sensors shutting down the unit if limits are exceeded.
Before the visit
Before our visit in Al Hamdaniyah
- 1
Provide system map and identify critical zones
Send system drawings and identify zones needing higher maintenance priority, such as medical rooms or conference halls.
- 2
Agree on the inspection schedule
Agree with the team on days and times for routine inspections that do not disrupt hotel or facility operations.
- 3
Designate a responsible contact and emergency terms
Assign a responsible contact for emergency calls and agree on what constitutes an urgent intervention that needs immediate response.
More districts for Operation & maintenance contracts
Other services in Al Hamdaniyah
FAQ
Questions about Operation & maintenance contracts
Do you handle plant operation as well as maintenance?
We cover both. Our team operates the plant daily: monitoring circuit pressures, water temperatures and flow rates, logging control-panel readings, and adjusting settings to match the load. Alongside daily operation, the contract includes preventive and corrective maintenance, with regular reports submitted to facility management.
What is the difference between preventive and corrective maintenance in your contract?
Preventive maintenance means inspecting components while they are still running: cleaning AHU coils, checking pump belts and fan bearings, verifying copper-pipe connections, and testing condenser and evaporator performance. Corrective maintenance starts when an actual fault is found, such as a tripping breaker, a degraded capacitor or a circuit leak, and the goal is to restore full plant performance.
Can you work on different brands of equipment in the same facility?
Yes. Many facilities combine equipment from several manufacturers on a single network. Our team works with Carrier, YORK, General, Midea, Gree and Smart Gold equipment within one unified operating system. When a contract covers multi-brand equipment, the initial site survey sets the specific procedures for each unit.
What happens when a worn part is found during a preventive maintenance round?
The technician records the finding in the inspection log and notifies the facility supervisor immediately. The extent of the damage and its effect on the rest of the plant is assessed, then the part is replaced or repaired under corrective maintenance before the fault develops and disrupts operation. The full incident is entered in the visit report.
What happens when a worn part is found during a preventive maintenance round?
We record the finding immediately in the round log and inform facility management of the part and the cause of the wear. After approval we replace the part and record it in the maintenance report. The final decision stays with you, and identifying the right part depends on the unit specifications noted in the survey.
Does the contract cover regular checks on pumps and distribution systems?
Yes, regular inspections of pumps, valves, ducts and chillers are core to the contract. We check performance, pressure, temperature and connection integrity.
How often does your team visit for routine inspections?
Inspection frequency depends on system size, condition and summer demand. We agree the schedule in the contract before starting.
What happens if there is an emergency failure at night or over the weekend?
We provide emergency cover as set out in the contract terms. We respond immediately to your call and send a team to address the failure as fast as possible.
How do you track faults and maintenance in your reports?
We record every inspection, repair and replaced part in clear reports sent to you regularly, tracking performance and planning for future replacements.
