Window AC installation in Al Manar

Yes, if no suitable opening exists we can cut one. At the survey we check the wall type and thickness and look for columns or cables that might be in the way, then agree the best position with you before any cutting begins.

A window unit produces condensate on its indoor side throughout operation. If the unit sits level or tilts inward, water pools in the base and runs down the inside wall. A slight outward tilt sends that water to the back of the unit and out, away from the wall and furniture.

Jeddah combines high heat, humidity and salty sea air, so sealing materials must hold up in those conditions. We use insulating and sealing materials suited to the opening and wall type, and the survey determines the right choice based on the gap size and wall construction.

A window unit draws a high current at start-up, and sharing a socket with other appliances strains the wiring and trips the breaker. The technician checks at the survey that a suitable socket is close to the unit position, and if one is not there we explain what is needed before installation proceeds.

Yes, the unit's weight directly affects how the frame is fixed and what support is needed. A concrete wall requires different treatment from a brick wall, and a wide opening needs more support than a narrow one. The technician decides at the survey what fixing method and materials suit the unit and the wall.

We inspect the frame and wall first; if they are strong enough we can install safely, otherwise we suggest frame reinforcement or an alternative.

A window unit reduces light slightly but gives efficient cooling and easy installation; the alternative is a split system that does not block windows but needs copper piping.

Direct heat increases the cooling load, so we ensure very tight sealing around the frame and recommend a blind or external shade to reduce heat ingress.

Each flat needs its own outdoor unit, and spacing them properly on the roof or balcony ensures good airflow for both.