Window unit fitted right
Window AC installation in Al Owaija
In Al Owaija, north-east Jeddah, window AC installation suits mid- and high-rise residential buildings. Alrabih seals the window tightly against dust and heat, ensuring safe condensate drainage without wall damage.
- Firm frame
- Sealed gaps
- Outward drain
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
When a window unit is the right choice
- 1
A room with no outdoor unit space
Some rooms have no wall facing a suitable space for an outdoor unit. A window AC is the practical answer: one unit in the opening cools the room and expels heat directly outside.
- 2
An annex, staff housing or storeroom
Annexes, staff rooms and warehouses need real cooling without the cost of long copper and cable runs. A window unit suits these spaces well when the right opening exists or can be made.
- 3
An existing window of the right size
When a wall already has a window opening that matches the unit you have chosen, the frame fits straight in without cutting new concrete. We confirm at the survey that the opening suits the unit and the wall carries the load.
Who it's for
Need to cool a maid's room or home annex
We survey the opening or proposed wall in the annex, fit the unit in a secure frame and seal every gap so no hot humid air enters the space.
Ask on WhatsAppManaging a staff housing building that needs practical cooling
We survey each room and its existing openings, then install units in level frames with the correct outward tilt in every room as the survey findings direct.
Ask on WhatsApp
What the installation covers
- Opening and wall check
- Frame levelled and secured
- Gaps sealed with insulation
- Drainage tilt adjusted
- Unit started and tested
How we work
How we work
- 1
Send a photo
WhatsApp us a photo of the opening or the proposed wall and your district, so the technician arrives with the right frame and fixings.
- 2
Site survey
On site the technician measures the opening, checks the wall, confirms there is a suitable power point near the unit, and agrees with you on any changes needed before starting.
- 3
Fit and seal
We fit the frame level, set the unit with the correct outward tilt, then seal every gap around the frame so no hot air, dust or humidity enters.
- 4
Start-up and handover
We run the unit, check the cooling and confirm condensate flows outward, then leave the space clean and show you how to clean the filter.
Proper installation or just placing the unit?
| Alrabih | The usual way | |
|---|---|---|
| Frame | Level and firmly secured | Propped without fixing |
| Gaps | Sealed with insulating materials | Open or thin plastic |
| Tilt | Outward fall drains water | Level or tilted inward |
| Power | Dedicated nearby socket | Extension from another room |
| Site cleanliness | Space left clean | Dust and debris left behind |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Al Owaija is a modern residential district of mid- and high-rise apartment blocks with contemporary designs and ordered streets, suffering from high heat, seasonal dust and moderate humidity. Tall buildings here mean window units may be on upper floors, requiring very tight sealing against dust and heat entry, and safe condensate drainage that does not affect lower walls or neighbouring buildings. Seasonal humidity increases mould risk, so sealing must combine flexibility and strength.
Al Owaija lies north-east, a modern residential district with mid- and high-rise apartment blocks in contemporary designs.
Window units here typically sit on upper floors of modern apartment blocks with strong metal frames, requiring robust sealing and precise condensate control.
The AC setup in Al Owaija
- 1
Window unit in high-rise apartment blocks
Installations here are on upper floors of modern blocks, so they need strong frames and tight sealing to handle height and wind.
- 2
Strong sealing against dust and heat
Sealing materials are strong and flexible to resist dust and heat entry, with capacity to handle seasonal humidity without cracking.
- 3
Controlled condensate drainage system
We install the unit at a precise angle to ensure safe condensate drainage away from walls and lower flats without pooling or seepage.
Before the visit
Before our visit in Al Owaija
- 1
Tell us the exact window location and floor
Before the appointment, let us know the exact flat location and floor, this helps us plan the work safely and coordinate with building management.
- 2
Arrange with building management for safe access
Confirm building management approves the visit and let us know if there are special requirements such as using internal stairs or security clearances.
- 3
Clear safe space around the window
Ensure the area around the window inside is clear and safe, and arrange with neighbours if access requires passing through an adjacent flat.
More districts for Window AC installation
Other services in Al Owaija
FAQ
Questions about Window AC installation
Can you cut a new opening in the wall if there is none?
Yes, if no suitable opening exists we can cut one. At the survey we check the wall type and thickness and look for columns or cables that might be in the way, then agree the best position with you before any cutting begins.
Why does the outward tilt matter on a window unit?
A window unit produces condensate on its indoor side throughout operation. If the unit sits level or tilts inward, water pools in the base and runs down the inside wall. A slight outward tilt sends that water to the back of the unit and out, away from the wall and furniture.
How do you seal the gaps around the frame given Jeddah's climate?
Jeddah combines high heat, humidity and salty sea air, so sealing materials must hold up in those conditions. We use insulating and sealing materials suited to the opening and wall type, and the survey determines the right choice based on the gap size and wall construction.
Does a window unit need its own power point?
A window unit draws a high current at start-up, and sharing a socket with other appliances strains the wiring and trips the breaker. The technician checks at the survey that a suitable socket is close to the unit position, and if one is not there we explain what is needed before installation proceeds.
Does the weight of a window unit affect how it is fixed?
Yes, the unit's weight directly affects how the frame is fixed and what support is needed. A concrete wall requires different treatment from a brick wall, and a wide opening needs more support than a narrow one. The technician decides at the survey what fixing method and materials suit the unit and the wall.
My window is very high up, is the installation safe from outside?
Yes, our team is trained for working at height and we coordinate with the building management for safe scaffolding or ladder use if needed.
The street is organised and wide, but parking at large buildings is tight, how do you manage?
We call before the appointment to find the best parking point, and we coordinate with building management to facilitate team access.
Seasonal humidity causes mould in high-up units, does sealing prevent this?
Good sealing reduces moisture entry, but we advise regular cleaning of both units to maintain healthy operation free from mould.
Condensate might drip onto the neighbour's flat below, how do you solve this?
We install the unit with precise tilt so condensate flows directly outward, and we advise using a deflector if necessary to direct drainage away from lower units.
