Specialist technician on site
HVAC & refrigeration technician in Industrial City
In Industrial City, south Jeddah, Alrabih's technicians serve factories and workshops with thorough inspection of AC and industrial fridges, precise fault diagnosis and solutions before production is affected.
- Accurate diagnosis
- Clear explanation first
- One visit
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
When to book a technician visit
- 1
AC that no longer cools properly
The unit runs but the air is barely cool, you hear knocking from the indoor head, or you find water on the wall. The technician brings pressure gauges and electrical test tools and finds the cause before starting any repair.
- 2
A fridge or cold room in your shop
The fridge does not hold temperature, or the compressor runs without cycling off. Stock loss starts before you notice the fault. The technician comes to your shop, checks the circuit and tells you the real condition of the unit.
- 3
A sudden fault with no obvious cause
The AC trips the breaker, runs without cooling, or gives off a smell. These symptoms can have different causes. The technician checks the board, compressor, capacitor and coil in the right order and explains what he finds.
Who it's for
Your AC keeps tripping the breaker and you need answers
The technician visits your home with electrical test tools, checks the board, capacitor and compressor in order, and explains the real cause before starting any repair.
Ask on WhatsAppYour shop fridge is not holding temperature and stock is at risk
The technician comes to your shop, checks the refrigeration cycle, compressor and coil, and tells you the real condition of the unit before you lose refrigerated stock.
Ask on WhatsApp
What the visit covers
- Pressure check with gauges
- Capacitor and electrical test
- Coil and drain inspection
- On-site refrigeration diagnosis
- Fault explained before work
How we work
How we work
- 1
Describe the fault
WhatsApp the unit type and what you are seeing, such as a noise, no cooling or water, and your district, and we arrange the visit.
- 2
On-site inspection
The technician arrives with pressure gauges and electrical test tools, inspects the unit in the correct sequence in front of you and does not start any work until the inspection is complete.
- 3
Explain and agree next step
After the inspection the technician explains the real cause and what the repair needs, then starts work only after you agree on what will be done.
- 4
Repair and run test
The technician carries out the agreed repair and runs the unit in front of you to confirm the fault is cleared and the unit is working properly before he leaves.
A qualified technician or a quick fix?
| Alrabih | The usual way | |
|---|---|---|
| Test tools | Pressure gauges and electrical meters | Guesswork diagnosis |
| Explanation before work | Cause and step agreed first | Starts without telling you |
| Visit scope | AC and fridge in one visit | One unit only |
| Repeat calls | Root cause found | Fault comes back |
| Equipment covered | AC and commercial refrigeration | AC only |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Industrial City is a wide area with large factories, workshops and storage, featuring tall buildings with high roofs and large outdoor units exposed to heavy industrial dust and heat reflected off concrete and metal surfaces. The technician reaches the industrial site and checks cooling systems whether large splits, central AC or industrial chillers, identifying faults in the compressor, coil, refrigerant or electrical components.
Industrial City, south Jeddah, is a vast industrial zone of factories and workshops with tall buildings and high roofs.
Most factories use large central chillers or high-capacity split units, with outdoor units mounted on high roofs exposed to industrial dust and heat.
The AC setup in Industrial City
- 1
Large industrial central cooling system
Most factories have a large central cooling system distributed across multiple zones, with the main outdoor unit on a high roof exposed to dust and heat.
- 2
Industrial chillers for cold storage
Factories handling food or chemical products need independent industrial chillers set to precise temperatures.
- 3
High-capacity splits for workshops and depots
Workshops and depots use very high-capacity splits to cool wide spaces efficiently, with the outdoor unit on open ground or a roof.
Before the visit
Before our visit in Industrial City
- 1
Pinpoint the main outdoor unit location in detail
Industrial City is very large and outdoor units are on high roofs, so give detailed directions with building and section to save time for the team.
- 2
Tell us about security restrictions or gates at the factory
Factories often have security checkpoints and gates, so coordinate with security or the manager beforehand to ensure the team enters without delay.
- 3
Have a factory supervisor accompany the team to outdoor units
High roofs and elevated areas in factories may need local knowledge and safety procedures, so a factory supervisor ensures safe and quick access to the units.
More districts for HVAC & refrigeration technician
Other services in Industrial City
FAQ
Questions about HVAC & refrigeration technician
What does the technician bring on the visit?
The technician brings pressure gauges to check the refrigeration cycle, electrical meters to test the capacitor, relay and control board, and leak detection and flare joint tools. The exact kit depends on the fault description you give when you book.
Can the technician check the AC and the fridge in the same visit?
Yes. The technician covers both air conditioning and refrigeration, so if you have a faulty AC and a commercial fridge or cold unit at the same location he inspects both in one visit and explains the condition of each separately before any repair begins.
How does the technician explain the fault before any work begins?
The technician diagnoses the fault first, whether a failing capacitor, a deteriorated flare joint or a blocked drain line, then tells you what he found, what work is needed and which parts must be replaced. No work starts until you have approved what he has explained.
What happens if the repair needs a spare part?
After the inspection the technician names the part needed and explains why. If the part is available on site the repair is done in the same visit. If it has to be sourced first, he agrees a second visit with you. No replacement is started without your knowledge of what will be done.
Is the inspection for a split unit different from a ducted or cassette unit?
Yes. A split unit gives direct access to the coil, filter and flare joint. A ducted or cassette unit also needs the plenum, dampers and duct runs checked to confirm air is distributed correctly. The technician decides the inspection method after seeing the unit type and installation at your site.
The factory is very large, can you maintain a complex central cooling system?
Yes, we service large central cooling systems and industrial compressors, cleaning coils and condensers and regularly checking pressure and copper lines to keep production running.
Industrial dust collects fast on outdoor units, how do you maintain them?
We regularly clean heavy dust and industrial contaminants from the condenser and fan, and inspect copper lines and wiring for oxidation and salt damage.
Heat in the factory is very high, does it affect the compressor?
Yes, high heat reflected from surfaces raises system pressure and strains the compressor, so we recommend monthly pressure and current checks and continuous condenser cleaning.
We have large industrial fridges for cold storage, can you repair them?
Yes, we repair large industrial fridges, cold storage rooms and heavy compressors, checking coils, valves and compressor to diagnose low charge, leaks and mechanical faults.
