Central AC installation in Al Huda

We calculate the thermal load for each zone based on its area, ceiling height, number of external openings, orientation and how it will be used. In Jeddah the sun's effect on west-facing facades is significant, and high humidity goes into the calculation. We choose the unit size after this calculation, not before.

We fabricate round and rectangular ducts in our own workshop from G90 galvanised sheet or aluminium sheet depending on what the project needs. This lets us cut ducts to the exact site dimensions and fit them tightly, avoiding ill-fitting sections that leak air and raise electricity consumption.

We use Mueller copper in runs of up to 30 metres without welded joints, which reduces potential leak points. If a run exceeds that, the survey determines whether the outdoor unit position needs rethinking or whether the refrigerant charge needs adjustment according to the type shown on the unit's nameplate.

Yes, and it is settled at the design stage. Each floor can have its own unit, or the network can be split into zones with dampers and a thermostat in each, so you do not cool the whole upper floor while the family sits in the majlis. We recommend the right option after the load calculation.

Yes, and the roof surface determines what kind of base is needed. For villas we fabricate a raised steel frame that keeps the unit clear of pooled rainwater and allows airflow beneath it. The exact height and angle depend on the roof pitch and the condensate drain position, which the site survey establishes. The aim is to keep the unit level and to prevent vibration movement during operation.

We handle calculation, design, installation and commissioning as one entity with single responsibility, so if an issue arises, you come to us, not chase contractors blaming each other. We coordinate with your main contractor before concrete pours and finishing.

We assess the site first. If the yard is tight, we place the unit on the roof with sound-damping mounts and coordinate with neighbours to reduce noise impact, but yards in Al Huda are typically spacious enough.

Yes, our heat calculation factors in peak summer temperatures in Jeddah, solar exposure, occupancy and appliances, so we size the unit to deliver comfortable cooling even at maximum demand.

Yes, ducts need adequate ceiling height and plenum airflow, and copper runs need thermal insulation and moisture protection. We identify requirements in the design phase and help adjust drawings if needed.