Central AC for apartments
Apartment central AC in Al Salmiyah Al Sharqiyah
In Al Salmiyah Al Sharqiyah, south Jeddah, apartment central AC must handle a hot, humid environment. Alrabih installs insulated ductwork and manages drainage carefully to prevent moisture buildup.
- Tight ceiling
- Sealed drain
- Quiet running
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
When central AC makes sense in your flat
- 1
New flat before finishing
The finishing stage is the right time to install central AC. The ceiling is open and walls are ready for copper and drain routes, so there is no need later to cut plaster or damage finished surfaces.
- 2
Occupied flat where splits fall short
If splits leave hot and cold patches, or the noise bothers you at night, central AC distributes air evenly and hides the unit away from the room. A site survey decides whether your ceiling height allows it.
- 3
Your unit disturbs the neighbours
In apartments, neighbours hear unit vibration through shared ceilings and walls. We choose the indoor unit suspension point carefully and use flexible collars on the air outlets to absorb vibration before it reaches the building structure.
Who it's for
Living in a furnished flat and want to replace splits
We survey your ceiling void to see whether a concealed unit fits, then run copper and drain without disturbing the existing décor.
Ask on WhatsAppBuying a flat in a building under construction
We coordinate with the finishing stage to run copper, drain and ducts before ceilings and walls are closed, so every route stays fully concealed.
Ask on WhatsApp
What the installation covers
- Ceiling survey and unit position
- Mueller copper fully insulated
- Condensate drain with correct fall
- Air ducts and distributed outlets
- Line vacuum and start-up test
How we work
How we work
- 1
Ceiling and route survey
We measure the available ceiling void, decide where the indoor unit hangs, map the copper route and find where condensate drains without causing damp. The survey decides whether one zone or more suits the flat.
- 2
Run copper and drain
We run insulated Mueller copper in the void above the suspended ceiling and slope the condensate line towards the building drain or an external outlet, so no standing water causes odour or damp.
- 3
Fit ducts and outlets
We mount the indoor unit on vibration-absorbing hangers, route ducts to each room and place every outlet so air spreads evenly without blowing cold air directly onto anyone.
- 4
Vacuum, test and hand over
We vacuum the copper line to remove air and moisture, check all joints, then run the unit and confirm cooling in every room before we hand over.
A considered install or a hasty one?
| Alrabih | The usual way | |
|---|---|---|
| Indoor unit position | Set after measuring the void | Wherever it fits |
| Condensate drain | Calculated fall to building drain | May pool and cause damp |
| Vibration | Absorbing hangers, flexible collars | Reaches the neighbours |
| Air distribution | Outlets placed for even spread | Cold rooms and warm rooms |
| Salty sea air | Mueller copper, tight flared joints | Early joint corrosion |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Al Salmiyah Al Sharqiyah is a coastal residential zone near the sea, meaning very high humidity and salt air affecting surfaces and metals. The district's blocks are relatively modern and designed to current standards, but intense heat and high humidity put enormous strain on AC systems. Effective drainage, strong duct insulation, and corrosion-resistant outdoor units are essential to prevent rust, mould and repeated failures. Selecting moisture and salt-resistant materials is a vital choice here.
Al Salmiyah Al Sharqiyah is on the coast in south Jeddah, a seaside residential district with very high heat and airborne salt.
Most flats here need robust rust-resistant outdoor units and excellent drainage to cope with constant coastal humidity.
The AC setup in Al Salmiyah Al Sharqiyah
- 1
Salt and rust-resistant outdoor unit
The outdoor unit is carefully selected in strong salt and corrosion-resistant materials, with extra protective coating and regular cleaning of deposits.
- 2
Heavily insulated ducts with thick layers
Thick insulation prevents surface condensation and water pooling inside ducts in very high coastal humidity.
- 3
Enhanced drainage with safe pipes and extra filters
Pipes slope steeply and multiple traps capture excess moisture, preventing the drainage blockages common in coastal districts.
Before the visit
Before our visit in Al Salmiyah Al Sharqiyah
- 1
Tell us the outdoor unit location before the visit
Specify whether the unit will go on the roof, balcony, or exterior wall, and send us a photo so we can assess salt spray and wind exposure.
- 2
Clear obstacles from ceiling void and drainage
Corridors and bathrooms where ducts will run must be clear, and external drainage points must be easily accessible.
- 3
Agree on monthly or bi-monthly maintenance plan
Coastal humidity demands frequent cleaning. Coordinate with us on a schedule for regular maintenance of coils, drains and the outdoor unit to remove salt and deposits.
More districts for Apartment central AC
Other services in Al Salmiyah Al Sharqiyah
FAQ
Questions about Apartment central AC
Is there enough ceiling space in a flat for a central unit?
It varies between flats. Slim ceiling cassettes need less void depth than full ducted units. A site survey measures what is available and decides the right type; if the corridor ceiling is too shallow we look at a storage room or bathroom ceiling instead.
Is one unit enough for the whole flat or do I need more?
It depends on the flat's area, room layout and how much sun each side receives. Two- and three-bedroom flats can sometimes work with one unit and well-planned ducts; larger flats or those with separate zones may need two. The survey decides.
Where does the outdoor unit go when the flat has no large balcony?
Options include the shared roof if the building rules allow it, a facade bracket away from neighbours' windows, or the balcony if it can take the load. We review the building's rules before recommending any position.
Jeddah's air is very humid; does that affect the condensate drain?
Yes. In Jeddah the indoor unit produces more condensate because of the high humidity. We make sure the drain line has enough fall, that the horizontal run before it drops is not too long, and that the outlet does not conflict with other flats' drainage in the building.
Can the flat be split into two zones with different temperatures?
It is possible using two separate indoor units or by adding variable-flow dampers on the duct runs. The right choice depends on the flat's layout and the ceiling void available in each zone. A site survey decides which approach suits your room arrangement.
Airborne salt causes rust quickly, how do you protect the outdoor unit?
We select outdoor units in salt and rust-resistant materials from trusted brands like Carrier and YORK, apply extra protection coating to metal parts, and clean salt deposits regularly.
Coastal humidity is very high, will moisture form inside the ducts?
We use heavily insulated ducts with thick wrapping and manage drainage extremely carefully to prevent moisture pooling. Seasonal maintenance cleans any condensation that might accumulate inside.
Humidity causes rapid mould in AC units, what do you do?
We install high-grade filters and indoor units with enhanced drainage to prevent water pooling. Monthly or bi-monthly cleaning of coils and drains is essential to prevent mould in this environment.
Heat and humidity together are severe, will the system handle the load?
We select units with above-standard capacity to handle the double pressure of heat and coastal humidity, and ensure effective distribution and strong drainage for long-term stable performance.
