The unit above the ceiling
Concealed central AC in Bani Malik
In Bani Malik, central Jeddah's modern flats and shops have concealed ceiling AC. When damp spots appear or performance drops, Alrabih's team opens the access panel, cleans the coil and pan, checks the drain and trap, and keeps the ceiling sound.
- Stain-free ceiling
- Clean drain
- Balanced airflow
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
When does a concealed unit need attention?
- 1
A damp stain on the plasterboard
Yellowing or a swollen plasterboard panel below the unit means the drain pan is overflowing. The cause is usually a blocked drain line or a dry trap that has lost its air seal, and leaving it widens the stain and damages the board.
- 2
Weak air from certain grilles
When grilles in one room weaken while others stay cool, the evaporator or blower inside the concealed unit needs cleaning. Jeddah's heavy dust settles on the fins and blower wheel and gradually cuts the airflow.
- 3
Humming or vibration from above
A recurring sound from the ceiling void may come from the blower wheel if it is dirty or unbalanced, or from the unit if its mounts have loosened. Finding the source means reaching the unit through the access panel and inspecting inside.
Who it's for
Installing a concealed unit in your new home
We check the ceiling void depth, mark the unit position, access panel location and drain route before the plasterboard is closed, so nothing needs reopening later.
Ask on WhatsAppA ceiling stain has appeared in your office or shop
We reach the concealed unit through the access panel, find whether the overflow is from the drain pan or the drain line and fix it without breaking the fitted-out ceiling.
Ask on WhatsApp
What the service covers
- Access panel check
- Evaporator coil and drain pan
- Drain fall and trap test
- Blower check and airflow balance
- Electrical readings and overflow tray
How we work
How we work
- 1
Locate and access
We check that the access panel is in the right place and large enough for the technician to reach the full unit without damaging the ceiling; if there is no panel, we mark where one should go.
- 2
Internal inspection
Through the access panel the technician inspects the evaporator, blower, drain pan and drain line and records the condition of each, so we know exactly where the fault is before starting work.
- 3
Clean and reset the drain
We clean the evaporator with a suitable cleaner, clean the blower wheel and drain pan, then flush the drain, check the trap and confirm the line falls the right way all the way to the discharge point.
- 4
Run and confirm
We run the unit, measure airflow at each grille and watch the drain pan to confirm no water is collecting, then show you what we found and what we did.
Proper service or wait for damage?
| Alrabih | The usual way | |
|---|---|---|
| Drain pan | Cleaned and fall confirmed | Overflows, ceiling stains |
| Drain trap | Checked and refilled if dry | Dries, air enters line |
| Evaporator coil | Cleaned, cooling maintained | Dust cuts cooling |
| Access panel | Located and easy to reach | Missing or in the wrong place |
| Blower wheel | Cleaned, balance restored | Dirt causes vibration |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Bani Malik is a modern mid-rise zone with residential and commercial buildings, most equipped with concealed central AC. This pattern delivers uniform cooling but demands careful attention because dust accumulates quickly in the coil in busy commercial areas, and drain pan leaks risk damaging ceilings and walls. Regular cleaning and drainage checks are vital to prevent moisture and mould in the sealed cavity.
Bani Malik is a modern central Jeddah district mixing residential and commercial mid-rise buildings.
Most central units here are hidden in suspended ceilings, with outdoor units on roofs or dedicated plant spaces.
The AC setup in Bani Malik
- 1
Concealed central unit in ceiling
Flats and shops in Bani Malik rely on central units distributed through ceiling diffuser openings.
- 2
Drain system with backflow-prevention trap
The drain runs through the ceiling with a trap to prevent air and moisture backflow into the unit.
- 3
Shared or individual outdoor units
Outdoor units may be shared between multiple flats or shops on the roof or in a dedicated external space.
Before the visit
Before our visit in Bani Malik
- 1
Show us the exact access panel location
Point out the access panel location in the suspended ceiling before the visit so the team reaches the unit without delay.
- 2
Clear space around the outdoor unit
If the unit is on the roof or in an external space, ensure the area around it is clear of obstacles and clutter.
- 3
Notify the shop owner of the visit time
If the unit is in a commercial shop, inform the owner or manager beforehand to avoid clashes with business hours.
More districts for Concealed central AC
Other services in Bani Malik
FAQ
Questions about Concealed central AC
How does the technician reach the unit without breaking the ceiling?
Through the dedicated access panel in the plasterboard. If the panel is there and directly in front of the unit, the technician goes straight in. If it is missing or in the wrong place, we mark the right position and cut it cleanly without touching the rest of the ceiling.
What causes the drain pan to overflow onto the plasterboard?
The two most common causes in Jeddah are a drain line blocked by algae that grow in the high humidity, and a dry trap that lets air in and stops the water moving. Both can be fixed without replacing the unit, provided there is no mechanical damage.
Does Jeddah's humidity affect concealed units more than other types?
Yes, a concealed unit sits in a closed void with little ventilation, so more condensate collects on the drain pan than in an exposed unit. That makes the drain line and trap more likely to block or dry out, and keeping them clear matters more here than for any other unit type.
Can a concealed unit go into a ceiling that does not have enough depth?
The depth needed varies with the unit type and dimensions, and only a site survey decides. If depth is borderline, we check whether the plasterboard ceiling can be dropped slightly in the unit zone. If that is not possible, we suggest a better fit for the room size and ceiling height.
Does the plasterboard ceiling need a minimum void depth to fit both the concealed unit and the drain line?
Yes, the unit body needs a certain height, and on top of that the drain line must slope continuously from the unit to the discharge point. The actual void depth required depends on the unit type, the drain run length and where the discharge is; only a site survey gives the exact answer.
I see yellow stains around the diffuser openings, does that mean the unit is leaking?
Usually yes. Yellow stains indicate a leak from the drain pan or a blocked trap. Immediate cleaning is essential to prevent ceiling and insulation damage.
The air from the diffusers feels damp and smells off, what's wrong?
Damp air with odour points to mould in the coil or drain pan, usually from blocked drainage. Opening the access panel and cleaning the coil, pan and trap will resolve it.
The shops here are busy; do they need more frequent unit care than the flats?
Yes. Commercial activity raises heat, humidity and dust, so units work harder. Cleaning every month to six weeks is better than longer intervals.
How do you verify that water drains correctly from inside the ceiling?
We open the access panel, visually inspect the drain pipes, pan and trap, and confirm water flows outward with no pooling or blockage anywhere.
