New cold room build
Cold room installation in Al Baghdadiyah Al Gharbiyah
Cold room installation in Al Baghdadiyah Al Gharbiyah serves the active warehouses, restaurants and hotels in this busy central district. We size the room to your load, fit insulated panels, a properly sealed door, a condensing unit and evaporator, and set up temperature control, so you take over a room that holds a steady temperature from day one.
- Insulated panels
- Sealed door
- Stable control
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Who needs a new cold room?
- 1
Restaurant or bakery expanding its store
Your current storage cannot hold the quantities you need, or you are relying on domestic fridges that are not up to the job. A purpose-built cold room keeps ingredients at a steady temperature and cuts waste caused by temperature swings.
- 2
Pharmacy or clinic needing medical storage
Medicines, vaccines and sensitive medical supplies need a temperature that does not shift when the door opens or when Jeddah's summer heat peaks. We build the room to suit that use and choose the condensing unit after the site survey.
- 3
Warehouse or grocery starting from scratch
You are fitting out your premises and want a cold room built in from the start, or you want to convert part of a warehouse into one. The site, the daily stock volume and how often the door opens all shape the right specification, and we work that out with you at the survey.
Who it's for
Opening a bakery and need ingredient storage
We survey your allocated space and build a cold room sized to your daily production volume, from insulated panels to the temperature controller.
Ask on WhatsAppYour clinic needs a room for medicines and vaccines
We build a cold room to the specification that medical and pharmaceutical stock requires, and select the condensing unit after a site survey to confirm temperature stays steady.
Ask on WhatsApp
What the installation covers
- Site survey and sizing
- Insulated wall and ceiling panels
- Sealed cold room door
- Condensing unit and evaporator
- Temperature controller and wiring
How we work
How we work
- 1
Site survey
The technician visits, measures the available space and asks about your stock type, quantities and daily use to set the room dimensions and the capacity the unit needs.
- 2
Panels and door
We fit the insulated wall and ceiling panels and seal every joint, then hang the cold room door in its frame and check that the seal presses evenly on all four sides.
- 3
Cooling unit and pipework
We mount the condensing unit where it has enough air, fit the evaporator inside the room, and run Mueller copper in runs of up to 30 metres without welded joints, fully insulated to reduce heat gain.
- 4
Vacuum, start-up, handover
We vacuum the copper line and test joints before starting the unit, then set the temperature controller and confirm the room reaches the target temperature before handing over.
A careful build or a hasty one?
| Alrabih | The usual way | |
|---|---|---|
| Room sizing | Based on stock and use | A rough guess |
| Insulated panels | Every joint sealed | Gaps that lose cold |
| Door seal | Even pressure all round | Condensation and air leaks |
| Copper line | Mueller insulated, vacuumed | No vacuum or poor insulation |
| Evaporator siting | Positioned for even airflow | Fitted without airflow study |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Al Baghdadiyah Al Gharbiyah is a mixed district of medium-rise residential blocks, shops, small and medium warehouses, and hosts several small hotels and restaurants needing cold rooms for fresh components and prepared food. Available space here is relatively tight because buildings stand close together, so the room design must fit corners and narrow passages without sacrificing insulation or seal integrity. Summer demand for cooling is also highly seasonal, so we select units that scale their capacity to match the workload.
Al Baghdadiyah Al Gharbiyah sits in central Jeddah as a mixed district of residential and commercial buildings, small warehouses, and several restaurants and small hotels.
Most cold rooms here are installed in warehouses and restaurants in sizes from 3 to 8 cubic metres, because available space is tight.
The AC setup in Al Baghdadiyah Al Gharbiyah
- 1
Compact cold room in a corner or passageway
The tight spaces in Al Baghdadiyah suit small to medium cold rooms, which we fit precisely into corners or passages without reducing insulation.
- 2
Outdoor unit on roof or external wall
Outdoor units are typically mounted on the warehouse or restaurant roof or a suitable external wall, with adequate space around the fan for airflow.
- 3
Simple and reliable temperature control system
We install straightforward, easy-to-use control panels that let you set the temperature and alert you if it drifts out of range.
Before the visit
Before our visit in Al Baghdadiyah Al Gharbiyah
- 1
Measure the available space for the room
Identify the exact location and actual dimensions of the available space (width, length, height), and tell us about any obstacles or columns inside the warehouse.
- 2
Check your existing electrical wiring
Be clear about the location of your electrical board and the strength of your current wiring; let us know how much available electrical capacity you have.
- 3
Confirm outdoor unit placement is accessible
Decide where the outdoor unit will go (roof, wall, or balcony) and make sure it can be safely reached for future maintenance.
More districts for Cold room installation
Other services in Al Baghdadiyah Al Gharbiyah
FAQ
Questions about Cold room installation
How is the right cold room size worked out?
Size depends on the type and quantity of stock, how often fresh goods come in and how many times the door opens each day. These factors together set the dimensions and the cooling unit capacity needed, which is why we do not suggest a size before the site visit.
Where does the condensing unit go in a restaurant or warehouse?
The condensing unit needs enough air around it, distance from heat sources and a spot a technician can reach for servicing. We decide the best location at the site survey based on the building layout and how the space is used.
What happens to my stock if the power to the room cuts out?
A well-insulated room with a tight door holds its cold for a limited time if the door stays shut, and longer the thicker the insulation and the better the seal. So we choose the panel thickness and the door seal with care, and set the controller to raise an alarm when the temperature rises, so you can act before stock spoils.
What is the difference between this room and a freezer room?
A chiller room works above freezing and suits vegetables, medicines, dairy and baked goods. A freezer room works below freezing and needs thicker insulation, an insulated floor, a heated door frame and a defrost system. If you need freezing or a combined room, we offer that as a dedicated service.
Can a cold room be installed in a rented space without major structural changes?
In most cases yes. Insulated panels are assembled inside the existing space without demolition or construction work, and the condensing unit is fixed in a suitable spot the technician identifies at the survey. Ceiling type and building ventilation may affect the details, and we confirm those after seeing the site.
Can you fit a cold room into a narrow warehouse?
Yes, we measure the space precisely and design the room to fit the passageway or corner, while ensuring adequate ventilation for the outdoor unit around the warehouse.
Small restaurants here need a cold room urgently, how soon can you install it?
Installation speed depends on the room size and the team's distance from the site; we confirm the timeline after measuring the space on site.
Al Baghdadiyah gets very hot in summer, will the room maintain steady temperature?
Yes, by choosing proper insulation thickness and the right unit size for your load and the surrounding heat, the room maintains the set temperature throughout the day.
Power supply in this area is sometimes weak, does that affect the unit?
Cooling units need a dedicated strong power feed and a separate circuit breaker; we check if the existing wiring is adequate or recommend reinforcing it before installation.
