New cold room build
Cold room installation in Al Huda
Cold room installation in Al Huda, south Jeddah, serves warehouses, food shops and small ventures. We design the room to your needs, install panels, door and outdoor unit efficiently, and set up temperature control to deliver a reliable room from day one.
- Insulated panels
- Sealed door
- Stable control
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Who needs a new cold room?
- 1
Restaurant or bakery expanding its store
Your current storage cannot hold the quantities you need, or you are relying on domestic fridges that are not up to the job. A purpose-built cold room keeps ingredients at a steady temperature and cuts waste caused by temperature swings.
- 2
Pharmacy or clinic needing medical storage
Medicines, vaccines and sensitive medical supplies need a temperature that does not shift when the door opens or when Jeddah's summer heat peaks. We build the room to suit that use and choose the condensing unit after the site survey.
- 3
Warehouse or grocery starting from scratch
You are fitting out your premises and want a cold room built in from the start, or you want to convert part of a warehouse into one. The site, the daily stock volume and how often the door opens all shape the right specification, and we work that out with you at the survey.
Who it's for
Opening a bakery and need ingredient storage
We survey your allocated space and build a cold room sized to your daily production volume, from insulated panels to the temperature controller.
Ask on WhatsAppYour clinic needs a room for medicines and vaccines
We build a cold room to the specification that medical and pharmaceutical stock requires, and select the condensing unit after a site survey to confirm temperature stays steady.
Ask on WhatsApp
What the installation covers
- Site survey and sizing
- Insulated wall and ceiling panels
- Sealed cold room door
- Condensing unit and evaporator
- Temperature controller and wiring
How we work
How we work
- 1
Site survey
The technician visits, measures the available space and asks about your stock type, quantities and daily use to set the room dimensions and the capacity the unit needs.
- 2
Panels and door
We fit the insulated wall and ceiling panels and seal every joint, then hang the cold room door in its frame and check that the seal presses evenly on all four sides.
- 3
Cooling unit and pipework
We mount the condensing unit where it has enough air, fit the evaporator inside the room, and run Mueller copper in runs of up to 30 metres without welded joints, fully insulated to reduce heat gain.
- 4
Vacuum, start-up, handover
We vacuum the copper line and test joints before starting the unit, then set the temperature controller and confirm the room reaches the target temperature before handing over.
A careful build or a hasty one?
| Alrabih | The usual way | |
|---|---|---|
| Room sizing | Based on stock and use | A rough guess |
| Insulated panels | Every joint sealed | Gaps that lose cold |
| Door seal | Even pressure all round | Condensation and air leaks |
| Copper line | Mueller insulated, vacuumed | No vacuum or poor insulation |
| Evaporator siting | Positioned for even airflow | Fitted without airflow study |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Al Huda is an expanding district with mixed residential and commercial projects, buildings typically multi-storey with ground-floor shops and housing above, or small independent warehouses. Intense heat and high coastal humidity increase unit load, and available spaces vary widely between projects, so we need careful on-site assessment, design the room to actual space and expected load, and mount the outdoor unit safely away from homes and foot traffic.
Al Huda lies in south Jeddah, an expanding mixed residential and commercial district near the waterfront.
Cold rooms here range widely from 4 to 25 cubic metres depending on project type, with outdoor units distributed across roofs and walls as feasible.
The AC setup in Al Huda
- 1
Cold room at varying capacities by project type
Different projects in Al Huda need rooms of varying sizes, from small shops to medium warehouses, so we assess each case carefully.
- 2
Outdoor unit with strong salt-air protection
Proximity to the sea demands outdoor units with rust-protection coating, positioned at reasonable height.
- 3
Drainage system protected from moisture and salt
Condensate drainage is designed to keep away from walls and foundations, staying clear of homes and walkways.
Before the visit
Before our visit in Al Huda
- 1
Prepare a sketch or photo of the site
Send a photo or simple sketch of available space, ceiling heights and walls, this helps us assess the site quickly before visiting.
- 2
Confirm access to roof and exterior walls
Make sure the team can safely reach the roof or exterior wall, and tell us of any obstacles or hazards.
- 3
Tell us about electrical supply and existing wiring
Let us know if wiring is adequate and current, and where the main panel is, so we plan safe unit connections.
More districts for Cold room installation
Other services in Al Huda
FAQ
Questions about Cold room installation
How is the right cold room size worked out?
Size depends on the type and quantity of stock, how often fresh goods come in and how many times the door opens each day. These factors together set the dimensions and the cooling unit capacity needed, which is why we do not suggest a size before the site visit.
Where does the condensing unit go in a restaurant or warehouse?
The condensing unit needs enough air around it, distance from heat sources and a spot a technician can reach for servicing. We decide the best location at the site survey based on the building layout and how the space is used.
What happens to my stock if the power to the room cuts out?
A well-insulated room with a tight door holds its cold for a limited time if the door stays shut, and longer the thicker the insulation and the better the seal. So we choose the panel thickness and the door seal with care, and set the controller to raise an alarm when the temperature rises, so you can act before stock spoils.
What is the difference between this room and a freezer room?
A chiller room works above freezing and suits vegetables, medicines, dairy and baked goods. A freezer room works below freezing and needs thicker insulation, an insulated floor, a heated door frame and a defrost system. If you need freezing or a combined room, we offer that as a dedicated service.
Can a cold room be installed in a rented space without major structural changes?
In most cases yes. Insulated panels are assembled inside the existing space without demolition or construction work, and the condensing unit is fixed in a suitable spot the technician identifies at the survey. Ceiling type and building ventilation may affect the details, and we confirm those after seeing the site.
My project is new and space is not yet defined, how do you determine the right room size?
We visit and study the available space and layout, ask about daily stock volume and expected use, then recommend a suitable size with flexibility for future growth.
The area is very coastal and the air is salty, does that affect the cooling and outdoor unit?
Absolutely, salty air accelerates rust and corrosion, so we choose outdoor units with double rust coating, mount them at safe height away from salt spray, and advise regular checks and cleaning.
The neighbourhood is expanding fast and new projects are coming close, will the outdoor unit stay safe?
We pick a safe spot on the roof or rear wall away from construction lines and expected urban development, mounting the unit so it does not block passages or get damaged by adjacent projects.
My stock needs intermittent cooling, can the room handle frequent on-off cycling?
Yes, modern thermostats are programmed for frequent cycling, and the unit is designed for this pattern of use, but we advise periodic seal and condensate checks.
