New cold room build
Cold room installation in Radwa
Cold room installation in Radwa serves modern shops, restaurants and pharmacies in Jeddah's north-east. Alrabih builds the room with precise thermal calculations, insulated panels and accurate temperature control to keep stock fresh and stable.
- Insulated panels
- Sealed door
- Stable control
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Who needs a new cold room?
- 1
Restaurant or bakery expanding its store
Your current storage cannot hold the quantities you need, or you are relying on domestic fridges that are not up to the job. A purpose-built cold room keeps ingredients at a steady temperature and cuts waste caused by temperature swings.
- 2
Pharmacy or clinic needing medical storage
Medicines, vaccines and sensitive medical supplies need a temperature that does not shift when the door opens or when Jeddah's summer heat peaks. We build the room to suit that use and choose the condensing unit after the site survey.
- 3
Warehouse or grocery starting from scratch
You are fitting out your premises and want a cold room built in from the start, or you want to convert part of a warehouse into one. The site, the daily stock volume and how often the door opens all shape the right specification, and we work that out with you at the survey.
Who it's for
Opening a bakery and need ingredient storage
We survey your allocated space and build a cold room sized to your daily production volume, from insulated panels to the temperature controller.
Ask on WhatsAppYour clinic needs a room for medicines and vaccines
We build a cold room to the specification that medical and pharmaceutical stock requires, and select the condensing unit after a site survey to confirm temperature stays steady.
Ask on WhatsApp
What the installation covers
- Site survey and sizing
- Insulated wall and ceiling panels
- Sealed cold room door
- Condensing unit and evaporator
- Temperature controller and wiring
How we work
How we work
- 1
Site survey
The technician visits, measures the available space and asks about your stock type, quantities and daily use to set the room dimensions and the capacity the unit needs.
- 2
Panels and door
We fit the insulated wall and ceiling panels and seal every joint, then hang the cold room door in its frame and check that the seal presses evenly on all four sides.
- 3
Cooling unit and pipework
We mount the condensing unit where it has enough air, fit the evaporator inside the room, and run Mueller copper in runs of up to 30 metres without welded joints, fully insulated to reduce heat gain.
- 4
Vacuum, start-up, handover
We vacuum the copper line and test joints before starting the unit, then set the temperature controller and confirm the room reaches the target temperature before handing over.
A careful build or a hasty one?
| Alrabih | The usual way | |
|---|---|---|
| Room sizing | Based on stock and use | A rough guess |
| Insulated panels | Every joint sealed | Gaps that lose cold |
| Door seal | Even pressure all round | Condensation and air leaks |
| Copper line | Mueller insulated, vacuumed | No vacuum or poor insulation |
| Evaporator siting | Positioned for even airflow | Fitted without airflow study |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Radwa is a modern north-east Jeddah district with spread-out residential and commercial buildings and moderate floor areas, hosting mid-sized shops, restaurants and small pharmacies. Most need sealed cold rooms for fresh and frozen stock, but space is tighter than warehouse settings. The north-east exposure means more humid, moisture-laden winds, raising the unit's thermal load, and older buildings may have uneven floors requiring careful levelling.
Radwa lies in Jeddah's north-east, a modern residential and commercial area with mid-sized shops and services.
Most cold rooms in Radwa are medium-sized to fit shop spaces, with outdoor units mounted on exterior walls or building corners away from foot traffic.
The AC setup in Radwa
- 1
Medium-sized cold room on shop floor
We install a medium room sized to the shop's footprint and storage needs, with tight sealing and safe water drainage.
- 2
Outdoor unit on exterior wall or building corner
Limited shop space means we mount the outdoor unit on an exterior wall or building corner away from customers and foot traffic.
- 3
Ventilation system shielded from humidity and wind
High north-east humidity requires robust insulation and careful drainage around the outdoor unit to keep moisture out.
Before the visit
Before our visit in Radwa
- 1
Measure the available space precisely
Send us the exact dimensions of the space you want to convert, with photos of the floor and walls so we can assess levelness and placement.
- 2
Confirm access to an exterior wall or corner
Confirm there is a safe exterior wall or building corner where we can mount the outdoor unit away from the shop entrance.
- 3
Clear the area for installation work
Clear the shop of goods and equipment around the planned location, and confirm which days or hours work can proceed without disrupting business.
More districts for Cold room installation
Other services in Radwa
FAQ
Questions about Cold room installation
How is the right cold room size worked out?
Size depends on the type and quantity of stock, how often fresh goods come in and how many times the door opens each day. These factors together set the dimensions and the cooling unit capacity needed, which is why we do not suggest a size before the site visit.
Where does the condensing unit go in a restaurant or warehouse?
The condensing unit needs enough air around it, distance from heat sources and a spot a technician can reach for servicing. We decide the best location at the site survey based on the building layout and how the space is used.
What happens to my stock if the power to the room cuts out?
A well-insulated room with a tight door holds its cold for a limited time if the door stays shut, and longer the thicker the insulation and the better the seal. So we choose the panel thickness and the door seal with care, and set the controller to raise an alarm when the temperature rises, so you can act before stock spoils.
What is the difference between this room and a freezer room?
A chiller room works above freezing and suits vegetables, medicines, dairy and baked goods. A freezer room works below freezing and needs thicker insulation, an insulated floor, a heated door frame and a defrost system. If you need freezing or a combined room, we offer that as a dedicated service.
Can a cold room be installed in a rented space without major structural changes?
In most cases yes. Insulated panels are assembled inside the existing space without demolition or construction work, and the condensing unit is fixed in a suitable spot the technician identifies at the survey. Ceiling type and building ventilation may affect the details, and we confirm those after seeing the site.
My small shop in Radwa needs a cold room, would a medium-sized unit work?
Yes, we first assess what you plan to store and in what quantity, then build a room to suit. Most small shops in Radwa benefit from medium-sized rooms with high efficiency.
The north-east wind and humidity are strong here, does that affect the cold room?
Yes, high humidity and wind increase the load on the unit. We position the outdoor unit where it is sheltered, insulate the copper lines robustly, and use thicker insulation on the panels.
My shop is older and the floor is uneven, can you still install the cold room?
Yes, we inspect the floor first. If it is uneven, we lay a level metal or concrete base before fitting the panels to ensure a proper seal.
My shop's electrical supply is average, will it handle a cold room?
It depends on the unit size. We check your existing supply first; if it is marginal or near capacity, we recommend running a dedicated line from the main panel for the cold room.
