Display chillers that stay stable
Display fridges & chillers in Radwa
In Radwa, east Jeddah, small to medium shops rely on display fridges to sell dairy, juices and cold drinks. We check the compressor, fans, air curtain and shelf temperature balance to restore the cabinet to peak performance.
- Working air curtain
- Even shelf temps
- Clear glass
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
When your display fridge needs attention
- 1
Glass fogs or sweats
In Jeddah's humid air and air-conditioned shops, moisture collects on the door glass or thick frost builds up. The cause is usually the door frame heater resistance or the door seal; the site decides which.
- 2
Stock spoiling or uneven temperatures
If upper shelves are warmer than lower ones, or open multideck zones read outside the required range, a fan fault or blocked cold-air path is likely. We measure shelf temperatures along the cabinet and find where the fault lies.
- 3
Hot condenser in a poorly cooled shop
A display cabinet throws a lot of heat into the shop floor. When the shop's cooling is insufficient, the condenser air temperature rises, the compressor works harder and the cabinet loses its chill. The fix starts with assessing the cabinet's location and the ventilation around it.
Who it's for
Running a bakery with a display chiller hurting sales
We inspect the air curtain, shelf temperatures and glass clarity in your bakery cabinet and restore the performance that puts your products in the best light.
Ask on WhatsAppManaging a pharmacy with an unstable medicine chiller
We measure shelf temperatures along the full cabinet length and check the fan and door seals to confirm that temperature stays within the required range on every shelf.
Ask on WhatsApp
What the work covers
- Air curtain check and adjustment
- Shelf temperature readings
- Condenser and fan cleaning
- Door seal and frame heater
- Lighting and evaporator fan test
How we work
How we work
- 1
Send a photo
WhatsApp a photo of the cabinet, your district and a brief description of the problem; the team can prepare the right tools before the visit.
- 2
Site survey and measurement
The technician measures shelf temperatures, inspects the condenser, fans, air curtain and door seals, and reviews the ventilation around the cabinet before touching anything.
- 3
Diagnosis and explanation
After measuring we tell you exactly what is wrong and what needs to be done, and you approve the work before the technician starts.
- 4
Repair and verify
We fix the fault, then re-measure shelf temperatures and verify the air curtain, lighting and fans before leaving the shop.
Thorough service or a quick fix?
| Alrabih | The usual way | |
|---|---|---|
| Shelf temps | Measured along the cabinet | Thermostat reading only |
| Air curtain | Checked and adjusted | Often ignored |
| Condenser | Cleaned and airflow checked | Gas top-up only |
| Door and frame | Seal and heater tested | Wiped, not tested |
| Surrounding airflow | Assessed around the cabinet | Not considered |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Radwa is a medium-density residential and commercial area in north-east Jeddah with small shopping centres of varied outlets and residential neighbourhoods on organized streets. Shops here are medium-sized and use practical, simple display fridges rather than large complex units. High summer heat and coastal humidity strain the compressor and condenser, and the lack of shade on some main streets means outdoor units may face direct sun, requiring regular checks and frequent cleaning.
Radwa is in north-east Jeddah, a medium-density residential and commercial area with shops and shopping centres on organized streets.
Most display fridges in Radwa are simple cabinets of medium capacity with outdoor compressors beside the shop or on small balconies.
The AC setup in Radwa
- 1
Simple medium-capacity display cabinets
Small to medium shops in Radwa use simple, practical display cabinets of medium capacity, not complex or high-capacity units.
- 2
Outdoor compressors beside the shop
Most outdoor units are mounted beside the shop on the ground or a small balcony, meaning they are directly exposed to heat and dust.
- 3
Simple fans and humidity-exposed coils
Unit design in Radwa is simple, but coastal humidity and salt corrode metal fans and coils quickly.
Before the visit
Before our visit in Radwa
- 1
Send a photo of the outdoor unit
Help us with a photo showing the outdoor unit location and condition. Make sure the parking point is close to the shop so the team can transport equipment easily.
- 2
Confirm power can be safely disconnected
We need to know where the fridge breaker or main circuit is. Tell us if the circuit is shared with other air units or shop appliances.
- 3
Choose a time outside peak hours
The fridge will be offline during inspection and cleaning. Pick a quiet hour like early morning or before closing to avoid lost sales.
More districts for Display fridges & chillers
Other services in Radwa
FAQ
Questions about Display fridges & chillers
Why does thick frost build up on open multideck shelves?
An open multideck relies on a cold air curtain to keep shop air out. If the fan weakens or nearby AC airflow deflects the curtain, shop humidity enters the cabinet and frost builds. We check fan speed, air curtain direction and temperature at several points along the cabinet to find exactly where the fault is.
Does shop temperature affect how the display fridge performs?
Yes, and in Jeddah this is more noticeable in summer when the heat load rises. The condenser rejects heat into shop air; when that air is warm, the compressor works harder and shelf temperatures rise. We assess the cabinet's position and its distance from AC supply diffusers as part of the survey.
The cabinet lighting is dim or flickering; is that something you handle?
Yes, cabinet lighting is part of the service. Internal lighting matters to how your product looks, and a wiring fault there can affect other circuits. We check the wiring and driver and replace the faulty component as part of the job.
My display fridge is an unfamiliar brand; can you still work on it?
Display cabinet faults are mostly common across brands: refrigeration circuit, fan, air curtain, door seal, frame heater. We diagnose by measurement, not by brand. If a replacement part is needed we tell you before going further and you decide.
Can a new display cabinet be installed in an existing shop?
Yes, but the site decides what is needed. We assess the electrical supply, drain route and cabinet position relative to AC diffusers before installation; where the cabinet sits affects the air curtain and the shop's overall cooling load. The survey sets out exactly what is required before any work begins.
How often do small shops in Radwa need fridge maintenance?
We recommend inspection at least every three months. High heat, humidity and dust on the streets increase dirt buildup on the condenser and fans, and regular cleaning maintains performance.
Does the hot sun on the shop's side affect the outdoor unit?
Yes, many outdoor units in Radwa face direct sun because there is little shade on the streets. We inspect the mounting and recommend installing a sun barrier or heat shield if possible.
Does dust and sand in the air affect the fridge filters?
Yes, the coastal environment and dust in Radwa increase salt and dirt buildup on coils and fans. We clean deeply and recommend changing filters monthly or every two months depending on conditions.
The shop's wiring is fairly old, is it suitable for the fridge?
It depends on the wire gauge and earthing. We check safety and insulation on each visit, and recommend periodic checks by a licensed electrician if you notice repeated outages.
