Commercial duct cleaning
Central AC duct cleaning in Al Harazat
In Al Harazat, east Jeddah, large villas and modern residential towers depend on central AC with complex, branched ductwork. The duct carries dust and moisture over long distances, so Alrabih cleans it section by section to restore efficiency and balanced distribution.
- Live cleaning
- Coils and trunks
- Resealed access
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
When does a central system need duct cleaning?
- 1
Repeated complaints from occupants
Staff complaining of stale air, dust settling on surfaces quickly or uneven temperatures between rooms. These often point to buildup inside the ductwork rather than a refrigerant fault, and cleaning is the right first step before any other adjustment.
- 2
AHU running harder than it should
A dust-coated AHU coil blocks heat transfer, so the motor runs longer without reaching the set temperature. Cleaning the coil and plenum recovers the efficiency the unit has lost gradually as deposits built up.
- 3
A building with no duct cleaning history
Many offices, schools and government buildings in Jeddah run their central system for years without opening the ductwork. Dust and salt from Jeddah's coastal air build up in the metal trunks until the galvanised layer is affected and corrosion begins.
Who it's for
Office staff complaining of stale air and dust
We survey the duct network and plenum, then set a section schedule that lets your staff keep working throughout the cleaning.
Ask on WhatsAppPreparing your school or clinic before opening
We cut access doors in the main trunks and clean the coil and plenum before occupants arrive, then fit and seal metal access doors airtight.
Ask on WhatsApp
What the cleaning covers
- Camera inspection before work
- Main trunk section by section
- AHU coil and plenum
- Access doors cut and resealed
- Pressure and airflow check
How we work
How we work
- 1
Survey and plan
A technician visits, maps the duct network, marks where access doors will go and agrees the section order with you so the occupied parts of the building stay clear of the work area.
- 2
Open and isolate the section
We cut access doors in the main trunks at the agreed points, isolate the section with temporary dampers and photograph the interior with a camera to record its condition before cleaning starts.
- 3
Agitate and vacuum
Powered brushes break loose the deposits and lift compacted dust while an industrial vacuum unit works in the opposite direction, collecting everything displaced without letting it spread through the occupied space.
- 4
Seal, run and test
Access doors are fitted and sealed airtight, then we run the system and measure flow at the grilles to confirm balance is restored across the sections we cleaned.
Methodical cleaning or surface cleaning?
| Alrabih | The usual way | |
|---|---|---|
| Main trunks | Access doors and industrial vacuum | Cleaned from grilles only |
| AHU coil | Direct clean with documentation | Left or wiped on the surface |
| Building continuity | Section by section, no full shutdown | All areas shut at once |
| Access doors | Sealed and tested after fitting | Sealed with adhesive tape |
| Condition record | Camera photos before and after | No visual record |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Al Harazat is a modern eastern district with relatively spacious layout, featuring large villas with gardens and extensive outdoor space and modern apartment towers with multi-floor units. These buildings typically have complex central duct systems that branch to cover multiple wings or floors, and branched ductwork means dust and moisture accumulate unevenly in each branch depending on location and use intensity. Coastal humidity and dust move at different speeds through different branches, potentially causing uneven blockage and under-cooled zones. Regular cleaning of branched ductwork ensures balanced distribution across all areas.
Al Harazat lies in east Jeddah, a modern residential area with relatively spacious layout, large villas and tall towers distributed with planned urban design.
Villas and towers in Al Harazat typically have a central duct system with complex branches feeding different wings or floors unevenly.
The AC setup in Al Harazat
- 1
Central duct branching to multiple wings
Large villas and towers in Al Harazat typically have a main duct branching to feed multiple wings or zones at different air speeds and pressures.
- 2
Duct branches of unequal length
Different duct branches have vastly different lengths, causing uneven blockage and unequal dust and moisture accumulation in each branch.
- 3
Duct installed in varied walls and zones
Main and branch duct runs through varied locations in the villa or tower, requiring careful inspection from multiple points to assess blockage in each branch.
Before the visit
Before our visit in Al Harazat
- 1
Identify the number of branches and wings
Tell us how many main branches the system has and how many wings or zones it serves, and which ones complain of less cooling or uneven distribution.
- 2
Locate the AHU and confirm access
Tell us the exact AHU location and whether it is in a plant room or on the roof, and how to access it safely.
- 3
Confirm access to branches and sections
Check that main inspection points on the main duct and branches are accessible without requiring extensive ceiling removal.
More districts for Central AC duct cleaning
Other services in Al Harazat
FAQ
Questions about Central AC duct cleaning
Can duct cleaning be done without shutting the whole system down?
Yes, section-by-section working is standard on large buildings. We isolate the section being cleaned with temporary dampers and work on it while the rest of the building continues running normally. The surveyor sets the section schedule after seeing the network layout.
How do you control airflow through dampers during section-by-section cleaning?
Before isolating any section, the technician checks and closes the associated dampers so that suction is directed into the section being cleaned and dust cannot travel into adjacent zones. Once a section is finished, the dampers are returned to their original positions and air distribution is checked before the team moves to the next section.
How do you handle access doors in suspended ceilings?
We agree the door positions with building management during the survey so they do not affect the visible finish. We cut the duct and fit metal doors screwed and sealed airtight. If ceiling tiles need to be cut, we coordinate that with whoever is responsible for the fit-out.
Do you clean the AHU coil and its filters in the same visit?
Yes, AHU coil and plenum cleaning is a core part of the central duct work, not a separate job. Filters are inspected in the same visit, and if they are badly damaged they are replaced as part of the work. The technician decides the actual condition after a direct inspection of the unit.
How do you reach ductwork above areas with no ceiling access?
During the survey the technician maps the main duct positions relative to available void spaces and selects the nearest reachable points for cutting access doors. If certain sections are fully blocked, the technician decides after direct inspection whether an alternative route exists or whether coordination with the fit-out team is needed.
Different wings of our villa have different temperatures on the same system, is that a duct problem?
Yes, branched ductwork can block unevenly in each branch, affecting flow and cooling in some wings. Cleaning restores balance.
How do you clean branched duct without tearing up all the ceilings?
We use inspection and cleaning techniques from terminal vents and main duct sections, minimising the need to open ceilings extensively.
Our north wing is cooler than the south wing, does the AC need adjusting?
The duct may be the issue before adjusting anything, partial blockage in the south branch could be the cause. Duct cleaning should come first.
Our humidity is high, are some duct branches more prone to mould than others?
Yes, less-used branches with slower airflow accumulate moisture and mould faster. Regular cleaning prevents moisture, mould and odours across all branches.
