Dedicated duct workshop
Duct fabrication in Al Buddur
Duct fabrication in Al Buddur serves apartment blocks, schools and the commercial centre requiring precise central AC. Alrabih manufactures the duct to exact site measurements to ensure trouble-free installation and even air distribution.
- G90 sheet
- Site dimensions
- Complex fittings
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Who needs workshop-fabricated duct?
- 1
A contractor with project-specific sizes
Your project has non-standard sizes or volumes too large for site cutting. We fabricate rectangular and round sections from your drawings at exact dimensions, labelled and ready to hang when they reach the site.
- 2
Fittings too awkward to cut on site
Elbows, transitions, offsets and takeoffs come out distorted when cut by hand on site, leaking air and creating noise in the line. We make them in the workshop at the right dimensions with tight seams.
- 3
Extending or renovating an existing duct network
You need new branches, a damaged section replaced or a fitting that matches an old duct size. We measure the existing network on site and fabricate the pieces to match what is already there.
Who it's for
Building a facility that needs non-standard duct sizes
We read your project drawings and fabricate all sections and fittings at exact dimensions from G90 or aluminium sheet, labelled and ready to hang the moment they reach your site.
Ask on WhatsAppRenovating home AC and need fittings to match old duct
We measure the existing ductwork in your home and fabricate the branches, transitions and elbows needed to match the original duct without replacing the whole network.
Ask on WhatsApp
What the fabrication covers
- Site measure or drawings
- G90 or aluminium duct
- Elbows transitions and takeoffs
- Tight seams to SMACNA
- Labelled sections ready to hang
How we work
How we work
- 1
Take measurements
A technician visits the site or you send us the drawings; we list every duct section needed, its size and the correct sheet thickness for that section.
- 2
Fabricate sections and fittings
We cut, form and lock the sheet in the workshop, including all elbows, transitions, offsets and takeoffs, and each section comes out at its exact dimension.
- 3
Label and prepare for delivery
We number every section and fitting against the assembly plan so the installation crew knows exactly where each piece goes, with no guessing on site.
- 4
Deliver to site
We deliver the duct to your Jeddah site protected and ready to hang. If you need an installation crew, we can arrange that as a separate step.
Workshop fabrication or site cutting?
| Alrabih | The usual way | |
|---|---|---|
| Dimensional accuracy | Workshop machines, tight dims | Hand variation on site |
| Complex fittings | Correct elbows and transitions | Distorted, leaking air |
| Seam quality | Tight lock, low leakage | Gaps weaken pressure |
| Site schedule | Arrives ready to hang | Extra time and site noise |
| Salt and humidity | Aluminium where site demands | One sheet regardless |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Al Buddur is a relatively modern eastern district of mid and high-rise apartment blocks, a large shopping centre, schools and clinics. All these buildings rely on central AC, and the duct must run through false ceilings across multiple units and distribute air evenly. On-site fabrication cannot deliver the precision needed for complex transitions and varying diameters. Our workshop manufactures each piece to accurate drawings and site measurements, arriving ready to hang with no gaps or misalignments.
Al Buddur is in east Jeddah, a district of modern apartment blocks, a large shopping centre and public buildings including schools and clinics.
Most projects in Al Buddur need rectangular duct that distributes air from a single central unit across several floors and wings.
The AC setup in Al Buddur
- 1
Multi-storey distribution rectangular duct
The apartment blocks and shopping centre in Al Buddur need complex rectangular duct branching from one central unit across multiple floors.
- 2
Multiple transitions and takeoffs
The duct includes many takeoffs and graduated elbows to distribute air evenly across all wings and units.
- 3
Cleaning ports and mounting brackets
We design regular cleaning ports along the duct and provide sturdy mounting brackets for false ceilings.
Before the visit
Before our visit in Al Buddur
- 1
Obtain complete HVAC drawings
Before fabrication starts, ensure you have complete HVAC drawings from the engineer showing duct runs, diameters and takeoffs.
- 2
Fix project delivery point and timing
Coordinate with project management on a safe delivery point and pickup timing that fits the installation schedule.
- 3
Confirm receiving team and temporary storage
Make sure the installation team will be present at delivery and there is a safe temporary location to store the duct before hanging.
More districts for Duct fabrication
Other services in Al Buddur
FAQ
Questions about Duct fabrication
Can you fabricate from drawings without visiting the site?
Yes, when the drawings are clear and carry the actual as-built dimensions. If a dimension is uncertain or a field change has been made, we prefer a site visit to avoid a fabricated piece that does not fit. We discuss the better approach with you before starting work.
What is the difference between galvanized and aluminium sheet for duct?
G90 galvanized sheet is the standard choice for interior duct: strong and suited to a range of pressures. Aluminium is lighter and handles Jeddah's coastal humidity and salt air better, making it right for some exposed applications or where structural load is a limiting factor. The correct choice depends on the site.
Can you make elbows and transitions to match an existing duct network?
Yes. We measure the existing network on site to match sizes precisely, whether you need a new branch added, a damaged fitting replaced or an extension tied into the original ductwork. The right approach is confirmed after the site visit.
How do you choose sheet thickness for each section?
Thickness follows section size: a large duct needs heavier sheet to hold its shape under pressure, a small one can use lighter material. We apply the SMACNA requirements to each section in the project individually, not a single thickness across the whole job.
Does Jeddah's humidity and salt air affect which sheet material to use?
Yes, particularly for sections exposed to outdoor air or installed near fresh-air intakes. G90 galvanized sheet performs well inside the building, but aluminium is the better choice where duct is in continuous contact with Jeddah's humid, salt-laden air. The site survey determines the right material for each section.
Do you fabricate distribution duct for a large shopping centre?
Yes, we fabricate complex distribution duct from a single chiller unit across multiple floors and shops. We take precise measurements and deliver the duct ready-hung with no fitting errors.
The shopping centre has varying ceiling heights, how do you handle that?
We measure each section separately and fabricate duct matching the ceiling height in each area. This ensures installation without on-site modifications.
Does eastern heat and humidity degrade the duct over time?
We use high-grade galvanized sheet that resists corrosion and humidity. Material choice depends on the project requirements and the surrounding environment.
The duct needs regular cleaning, is it easy to access from inside?
We design the duct with access ports for cleaning according to operational standards. We confirm port locations with the engineer before fabrication.
