Desert cooler, proper duct
Evaporative (desert) duct installation in Al Shurooq
In Al Shurooq, east Jeddah, evaporative duct installation appeals to new, spacious residential buildings. We access the roof, open and seal against dust and humidity, then run galvanised duct to occupied areas.
- Sealed roof
- Galvanised duct
- Air changes
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
When you need evaporative cooler duct
- 1
A large workshop or warehouse
Large industrial spaces get very hot in Jeddah summers and split units are expensive to run there. An evaporative cooler with distribution duct brings air to work areas at lower running cost, provided the space is ventilated and not sealed shut.
- 2
A majlis tent or seasonal space
Outdoor majlis areas and seasonal tents do not suit split AC units because of the structure. Evaporative duct delivers a cool air stream as long as the space is open enough for air changes, which the survey confirms.
- 3
Old duct with poor airflow
Old sheet duct cracks over time and air leaks from the joints before reaching the space. On site we check whether the problem is leaking duct, poor distribution, or the cooler size itself.
Who it's for
Need to cool a large workshop at reasonable running cost
We survey the workshop and check its ventilation, then run galvanised duct from the roof cooler to the work areas with exhaust openings that keep air moving through the space.
Ask on WhatsAppYou have an outdoor majlis that needs seasonal cooling
We check how open the majlis is and assess its structure, then design the duct route and exhaust openings so cool air reaches the seating area without humid air building up inside.
Ask on WhatsApp
What the work covers
- Weatherproof roof collar fitted
- G90 galvanised duct runs
- Branch and air outlet connections
- Exhaust openings for air changes
- Airflow check after start-up
How we work
How we work
- 1
Site survey first
We visit, measure the space and check how open it is, because evaporative cooling needs enough ventilation; without it humidity rises inside and the cooling effect drops.
- 2
Plan the duct route
We plan the main duct run, branches, air outlet positions and exhaust opening locations, and show you the layout before any work starts.
- 3
Install duct and seal roof
We open the roof, fit and seal the collar against leaks, then run the galvanised duct and hang it on proper supports so it does not sag.
- 4
Start-up and test
We run the evaporative cooler and check that air reaches every outlet and that the exhaust openings are working so fresh air is visibly moving through the space.
Planned duct or a quick run?
| Alrabih | The usual way | |
|---|---|---|
| Roof seal | Weatherproof, sealed collar | Silicone that cracks in heat |
| Sheet | G90 galvanised | Unspecified gauge |
| Exhaust | Sized openings for air changes | Left to chance |
| Space suitability | Confirmed by survey | Not checked |
| Duct supports | Fixed hangers along the full run | Duct left unsupported |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Al Shurooq is a modern district of upmarket apartment buildings and villas on spacious land with wide, safe roofs. Modern design and open space between buildings make evaporative duct installation straightforward without major structural obstacles. The heat and dryness in Al Shurooq suit evaporative cooling, though the eastern location brings seasonal dust requiring regular maintenance and routine filter cleaning.
Al Shurooq lies in east Jeddah, a modern, upmarket residential district of apartment buildings and villas on level rooftops.
Most apartment blocks and villas in Al Shurooq have wide, level roofs and strong separate power systems that support large evaporative units without upgrades.
The AC setup in Al Shurooq
- 1
Large-diameter galvanised duct
Spacious layouts in upmarket villas and apartments allow large-diameter galvanised duct to distribute cool air with high efficiency.
- 2
Multiple air exhaust vents
Wet air exits through multiple vents in walls and facades, distributed to minimise visual impact and maintain comfort.
- 3
Wide roof with flexible mounting
Wide roofs offer multiple options for mounting the unit and support structures to suit the villa's architectural design.
Before the visit
Before our visit in Al Shurooq
- 1
Detailed photos of roof and building
Send photos of the roof from different angles and interior spaces to be cooled so we determine the best unit and duct positioning.
- 2
Confirm exhaust and distribution priorities
Identify which rooms need stronger cooling and where exhaust vents can go without disruption, and tell us your preferences.
- 3
Confirm dedicated electrical circuit
Know the panel location and confirm a separate power circuit is available for the unit, and tell us the total distribution capacity.
More districts for Evaporative (desert) duct installation
Other services in Al Shurooq
FAQ
Questions about Evaporative (desert) duct installation
Does evaporative cooling work in Jeddah in summer?
Evaporative cooling relies on water evaporation and weakens when humidity is high. In Jeddah, humidity is higher near the coast and lower inland. The survey decides whether the space and the season are suitable, which is why we do not start before visiting the site.
Why do exhaust openings matter as much as the duct runs?
An evaporative cooler pushes fresh air in continuously. Without an exit path, humid air builds up inside and the felt temperature rises. Properly sized exhaust openings keep air moving through, not piling up, and that is the core of how this type of cooling works.
What sheet do you use for the duct?
We use G90 galvanised steel sheet, which resists rust in Jeddah's humid and salty air. The duct sections are formed in our workshop before being taken to site, then hung on supports along the run to stop them sagging.
Can one cooler supply duct to more than one area?
Duct can be branched from one unit to more than one outlet, but each branch reduces the airflow at every opening. The survey decides whether the cooler has enough output for the total area, or whether a separate unit for each wing is the better answer.
Can evaporative cooler duct run through a false ceiling?
Evaporative cooling depends on continuous air movement and exchange, which requires exhaust openings in the same space the duct serves. A false ceiling restricts that flow unless dedicated openings lead air out of the building. The site survey decides whether the structure allows it, because the duct run and the exhaust are designed together as one system, not separately.
Does evaporative cooling suit upmarket villas in Al Shurooq?
Yes, if the villa can accommodate wet air exhaust vents and duct distribution. A site survey assesses the interior design and comfort requirements.
Seasonal dust from the east is heavy, does it damage the unit?
Dust accumulates in the filters and evaporative media, so we recommend monthly cleaning during dusty seasons and routine checks to maintain performance.
Our roofs are very spacious, does this reduce installation time?
Yes, the wide, level roofs in Al Shurooq reduce installation time and sealing, and allow more flexibility in unit positioning.
The villa's power is strong, but is it enough for the unit, duct and fans?
Strong electrical systems in Al Shurooq usually have sufficient separate circuits, but we check the load and capacity before installation begins.
