Cooling fit for a mosque

Mosque HVAC in Al Rawasi

In Al Rawasi, east Jeddah, mosques are growing rapidly surrounded by new buildings, requiring flexible cooling systems that scale with expansion. Alrabih designs extensible solutions that accept new unit additions without a complete rebuild.

Call nowWhatsApp
  • Even distribution
  • Quiet units
  • Scheduled servicing

Clients We're Proud to Serve

Organisations and companies that trusted Alrabih with their projects.

  • Saudi Aramco
  • Ministry of Energy
  • Royal Saudi Land Forces
  • Royal Saudi Naval Forces
  • Al Baik
  • Centro Hotels by Rotana
  • King Abdullah Economic City
  • First Mills
  • Juffali
  • eXtra
  • Dr. Soliman Fakeeh Medical Center
  • Alesayi Motors
  • Abu Zaid
  • Water Desalination
  • Attieh Steel
  • SSCO
  • Creet
  • Emad Rizq
  • Alfaneyah
  • Rawat Alam Al Tasmeem
  • IBI Magix Arabia — Construction Services
  • Midtown for Construction
  • Petra Engineering Industries Co.
  • Hyrmas
  • Batterjee Medical College
  • Advanced Horizons Contracting Company
  • D.Metals
  • Benchbox — Masters of Space
  • Sadafco
  • Umm Al-Qura University
  • Saudi Arabian Drug Store (SADS)
  • Foamco
  • Ahmad A. R. Bin Afif Industries Co. (Sandwich Panel Factory)
  • Namariq
  • ALS

When a mosque needs a specialist approach

  1. 1

    Heat reaching the back rows

    Cold air pools near the units and never reaches the back of the hall. In Jeddah's humidity, worshippers in the far rows feel the heat even with the system running. That is a design problem, not a unit fault.

  2. 2

    Noise that disturbs prayer

    Unit noise in a quiet hall distracts worshippers and breaks concentration. The right unit type, its position and the air velocity setting all reduce noise to the lowest possible level, and those choices are made at the survey.

  3. 3

    A dome or high ceiling that traps heat

    Hot air rises and collects under the dome, so the breathing level stays warm even with large units running. We set diffuser angles and air paths at the survey to push that hot layer out rather than cool over the top of it.

Who it's for

  • Building a new mosque that needs AC from the start

    We join the design stage to fix duct routes and unit positions before ceilings are closed, so the installation is clean and efficient with no remedial work needed later.

    Ask on WhatsApp

  • Your existing mosque cools unevenly across the rows

    We survey the existing system, find the cause of uneven distribution and propose changes to the airflow paths or units without disrupting the mosque.

    Ask on WhatsApp

What the work covers

  • Hall survey and airflow mapping
  • Ductwork to SMACNA standard
  • Units fitted at surveyed positions
  • Airflow check across the rows
  • Contracts scheduled between prayers
Request a quote

How we work

How we work

  1. 1

    Mosque survey

    We visit the mosque outside prayer times to measure the hall, ceiling height and dome, and agree diffuser positions, duct routes and unit locations before any work begins.

  2. 2

    Design and fabrication

    We design the system from the survey data and fabricate the ducts in our own workshop from G90 galvanised sheet, then prepare them for installation.

  3. 3

    Installation at agreed times

    We coordinate with mosque management to work between prayers or at times that do not interrupt activities, and we leave the hall clean at the end of each working day.

  4. 4

    Testing and handover

    We run the system and measure air distribution at the front and back rows and sound levels, adjusting the balance until comfort is even across the whole hall.

Designed for a mosque or units placed at random?

AlrabihThe usual way
Air distributionEven across every rowCold front, hot back
SoundAssessed at surveyNot considered
Dome and high ceilingPlanned airflow pathsHot layer left above
MaintenanceScheduled between prayersVisits that disrupt use
Startup schedulingProgrammed before each prayerManual, inconsistent start

Everything your AC needs, from one team

From system design and duct fabrication to installation, commissioning and maintenance.

Some of our work

Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.

  • Galvanized rectangular duct trunk with branch takeoffs and round diffusers, hung from a black ceiling, a Carrier unit visible behind — interior finishing stage.
  • Round diffusers and a spiral duct trunk in a tiled stairwell service shaft.
  • Rooftop ductwork and an exhaust fan, with Jeddah buildings in the background.
  • Rooftop packaged AC units with rectangular duct transitions, city buildings behind.
  • Insulated rooftop duct run beside a packaged unit, a warehouse roof in the background.
  • A grid of round diffusers in an open-plan office ceiling, mid-construction.
  • An insulated rooftop duct elbow, against a mountainous backdrop.
  • Large insulated ductwork running along a factory ceiling, with workers visible below.
  • A yellow round diffuser mid-installation, with spiral duct and a suspended ceiling grid.
  • Duct insulation wrap in progress on a construction site, bare duct still exposed.
  • A black-painted duct trunk with round diffusers and track lighting, in a finished retail interior.
  • An indoor AHU unit connected to round ductwork in a mechanical plant room, exposed concrete ceiling.
Similar project? Send us the details

Customer reviews

What our customers say

4.8

From 10 Google reviews

  • Muhammadramzan 2641

    “MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”

  • shahzeb armani

    “Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”

  • Tawfik AlyawerLocal Guide

    “U can find all u need for air conditioning”

Read every review on Google

Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.

Worked with us? Leave a review

Service areas

We come to you anywhere in Jeddah

From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.

Map of Jeddah by sector, with Alrabih's base in Al Aziziyah
Don't see your district?Message us. We most likely cover it.

What sets this district apart

Al Rawasi is a newly developed, fast-expanding area witnessing continuous urban development and new residential complexes. Mosques here are either new, built with modern blocks, or smaller than older designs, creating a balance between current and future needs. The eastern dry heat requires a flexible system that allows extra cooling capacity to be added when needed without service disruption, and design that anticipates population growth.

Al Rawasi lies in east Jeddah, a newly developed fast-growing area with new mosques in emerging residential complexes.

Most Al Rawasi mosques have modern designs using expandable central cooling systems that accept new outdoor units or indoor heads.

The AC setup in Al Rawasi

  1. 1

    Expandable central system

    A central air-handling unit on the roof with ducts connected at expansion points, allowing future addition of new units or branches.

  2. 2

    Extra electrical provision for flexibility

    Reserve electrical runs in the building allow connecting new outdoor units or indoor branches without full rewiring.

  3. 3

    Standard ceiling outlets for easy modification

    Air outlets built to standard dimensions allowing new outlets to be added or modified without changing existing ducts.

Before the visit

Before our visit in Al Rawasi

  1. 1

    Obtain future construction plans for the complex

    Ask the complex management for a map of planned construction over coming years to position units based on expected development.

  2. 2

    Verify electrical services and available capacity

    Confirm current electrical runs can accept future units, or whether electrical expansion is feasible.

  3. 3

    Agree with authorities on mosque expansion plans

    Meet with mosque and complex management to understand planned expansions (like more worshippers or additional wings) so design aligns with them.

More districts for Mosque HVAC

Other services in Al Rawasi

FAQ

Questions about Mosque HVAC

How do you make sure the far rows get enough cooling?

At the survey we set diffuser angles, air velocity and duct routing so cold air travels to the last row. After installation we measure the temperature difference between the front and back rows and adjust each diffuser's balance until that difference is as small as the space allows.

Can you work in a functioning mosque without disrupting prayers?

Yes. We agree a phased schedule with mosque management in advance and divide the work into sessions between prayers. Before each call to prayer we lift tools, cover any temporary openings and return the hall to a usable state, then resume afterwards.

What type of ductwork do you use in prayer halls?

We fabricate ducts in our own workshop from G90 galvanised sheet, round or rectangular as the design requires. We use Armaflex and Kimmco insulation and Foster sealants to limit heat gain and keep sound transmission through the ductwork as low as possible.

Can the system be set to start just before each prayer time?

Yes. The controls on Carrier, YORK, General, Midea, Gree and Smart Gold units support scheduled start and stop times. At the survey we confirm the scheduling options for the chosen units and programme the timings at handover, so the hall is already cool when worshippers arrive.

Can we cool only part of the hall when fewer people attend?

Yes, if the system is designed in zones. We divide the hall into sections, each with its own unit or closable outlets, so you run the front rows alone when few people attend and the whole hall for Friday prayer and occasions, cutting power use without affecting worshippers.

The district is expanding rapidly and the mosque may need more cooling later; how do you design for this?

We install a system with sufficient base capacity for current needs, but designed to allow new outdoor units or duct branches to be added without full re-engineering.

Can new cooling units be added later without stopping the current system?

Yes, if we plan for it from the start. We install ductwork with designated expansion points and extra electrical runs allowing quick addition and connection of new units.

New residential blocks around the mosque; do they affect cold air distribution?

New buildings can affect airflow around outdoor units and sun exposure, so we select mounting positions accounting for planned construction.

Modern mosque design is different; does cooling differ from older mosques?

Yes, modern mosques have lower ceilings and better natural ventilation, allowing more efficient, less powerful cooling systems than older designs.

The Jeddah corniche in cool weather

Prepare your mosque for comfortable prayer

Send us a photo of the hall or dome on WhatsApp or call us, and we will arrange a survey at a time that suits the mosque, Saturday to Thursday.

Call nowWhatsApp
CallWhatsApp