One contractor, whole plant
Operation & maintenance contracts in Al Hijaz
In Al Hijaz, east Jeddah, factories, warehouses and logistics hubs need continuous centralised cooling in demanding environments. Alrabih's contracts provide the reliability these facilities depend on, with records documenting every operation.
- Daily operation
- Preventive maintenance
- Documented reports
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Who needs an operation and maintenance contract?
- 1
A facility without an in-house team
Hotels, factories and government buildings need someone daily to start chillers, watch pumps and log readings. Without a specialist team, a small fault grows before anyone notices.
- 2
A facility with repeated breakdowns
Repeated breakdowns usually point to missed preventive work: a blocked filter, a compressor running under load, a worn pulley in an AHU. A contract catches these causes before they become full failures.
- 3
A government or hotel project that requires records
Some government and hotel clients require operating logs and regular maintenance reports. We produce these on schedule and keep them available whenever you need them.
Who it's for
Managing a hotel where the HVAC plant runs all day
We handle daily operation of chillers, AHUs and pumps, and produce the reading logs and reports your hotel management requires.
Ask on WhatsAppRunning a factory where an HVAC stoppage halts production
We carry out preventive maintenance on compressors, coils and valves on schedule so your production line is not stopped in Jeddah's summer, and we repair any fault as soon as it appears.
Ask on WhatsApp
What the contract covers
- Daily chiller and pump operation
- Preventive equipment and duct maintenance
- Fault repair and parts replacement
- Performance testing and readings log
- Periodic facility management reports
How we work
How we work
- 1
Site survey and plant assessment
We visit the facility and record all HVAC equipment, assessing the condition of each unit before signing, because the scope depends on what the survey finds.
- 2
Agree scope and schedule
We set the preventive maintenance schedule with you, define the daily operating tasks and each party's responsibilities, and agree the format and frequency of reports.
- 3
Start operations and preventive work
Our team handles daily operation and carries out preventive work on schedule: cleaning coils, inspecting compressors, testing valves and manifolds, and logging readings each round.
- 4
Regular reports and ongoing follow-up
We send periodic reports covering work completed, observations and any parts replaced, so facility management stays fully informed about the plant's condition.
A full contract or repair-only calls?
| Alrabih | The usual way | |
|---|---|---|
| Accountability | One contractor follows all | No clear party |
| Fault detection | Before breakdown | After the equipment stops |
| Documentation | Regular logs and reports | No records kept |
| Major fault costs | Reduced by prevention | Arrive unplanned |
| Reading logs | Recorded every round | Left to operator if any |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Factories and warehouses in Al Hijaz operate at high intensity over long hours, with cooling systems carrying severe daily loads. The industrial environment means dust, extra heat and constant stress on chillers, pumps and copper lines. A comprehensive contract includes regular inspection, periodic cleaning of condensers and filters, and fluid changes on recommended schedules. All work is logged in clear reports documenting compliance with preventive maintenance timelines.
Al Hijaz lies in Jeddah's eastern sector, a district of factories, dry ports, warehouses and logistics facilities served by heavy-duty cooling systems.
Large factories and warehouses here use very high-capacity water chillers and powerful pumps to distribute cooling across large areas and multiple storage zones.
The AC setup in Al Hijaz
- 1
Very high-capacity water chillers with extensive distribution
Large factories and warehouses use very high-capacity chillers distributing cooling across extensive areas and separate sections.
- 2
Powerful pumps and extensive pipe networks
Copper lines run long distances through buildings and warehouses, requiring powerful pumps and regular inspection for leaks and corrosion.
- 3
Distributed monitoring and control at multiple points
Multiple monitoring points in warehouses and sections provide clear visibility of system performance and enable early detection of localised faults.
Before the visit
Before our visit in Al Hijaz
- 1
Identify chiller, pump and main line locations
Tell us where the main chillers and pumps are, and how the main pipe runs are distributed across warehouses and sections.
- 2
Coordinate maintenance with production and operations schedules
Tell us your peak production and quiet hours so we can schedule checks and cleaning when cooling demand is lower.
- 3
Gather fault and performance records
Compile any previous fault reports, leaks and poor performance issues so we can assess known problems in your system.
More districts for Operation & maintenance contracts
Other services in Al Hijaz
FAQ
Questions about Operation & maintenance contracts
Do you handle plant operation as well as maintenance?
We cover both. Our team operates the plant daily: monitoring circuit pressures, water temperatures and flow rates, logging control-panel readings, and adjusting settings to match the load. Alongside daily operation, the contract includes preventive and corrective maintenance, with regular reports submitted to facility management.
What is the difference between preventive and corrective maintenance in your contract?
Preventive maintenance means inspecting components while they are still running: cleaning AHU coils, checking pump belts and fan bearings, verifying copper-pipe connections, and testing condenser and evaporator performance. Corrective maintenance starts when an actual fault is found, such as a tripping breaker, a degraded capacitor or a circuit leak, and the goal is to restore full plant performance.
Can you work on different brands of equipment in the same facility?
Yes. Many facilities combine equipment from several manufacturers on a single network. Our team works with Carrier, YORK, General, Midea, Gree and Smart Gold equipment within one unified operating system. When a contract covers multi-brand equipment, the initial site survey sets the specific procedures for each unit.
What happens when a worn part is found during a preventive maintenance round?
The technician records the finding in the inspection log and notifies the facility supervisor immediately. The extent of the damage and its effect on the rest of the plant is assessed, then the part is replaced or repaired under corrective maintenance before the fault develops and disrupts operation. The full incident is entered in the visit report.
What happens when a worn part is found during a preventive maintenance round?
We record the finding immediately in the round log and inform facility management of the part and the cause of the wear. After approval we replace the part and record it in the maintenance report. The final decision stays with you, and identifying the right part depends on the unit specifications noted in the survey.
Industrial dust and heat reduce chiller efficiency, how do you address this?
We increase condenser and filter cleaning frequency beyond standard schedules and continuously monitor for dust leaks in condensers.
Logistics hubs run year-round without breaks, how do you maintain while keeping things running?
We coordinate with facility management to schedule checks and cleaning during minimal-use hours or shift changes.
Long copper lines are exposed to coastal corrosion, how do you protect them?
We regularly inspect moisture barriers and dryness around pipes, replace any damaged insulation, and watch for corrosion and leak signs.
How do you document preventive maintenance for industrial records and insurance?
We provide detailed monthly reports with date, time and readings for every task, results and replaced parts, supporting your official maintenance records.
