Find the leak first
Refrigerant charging in Al Ruwais
In Al Ruwais, hotels, office towers and residential complexes rely on complex refrigerant systems needing regular checks and quick repair. Alrabih's team precisely locates the leak, fixes it, then recharges to original specification.
- Leak located
- Vacuum and test
- Accurate charge
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Signs the charge is low
- 1
Weak cooling and a compressor that runs on
The unit runs for hours without bringing the temperature down, or cools very slowly. This is usually the first sign the charge is low and the circuit can no longer move heat efficiently.
- 2
Frost on the pipes or evaporator coil
Ice on the thin pipe or on the evaporator coil points to low refrigerant pressure. Continued running can damage the coil. Where the frost forms helps the technician narrow down the problem area.
- 3
A refrigerator or cold room that will not hold temperature
In commercial or industrial refrigeration equipment, a rising cabinet temperature means stock at risk. Low refrigerant is one possible cause, and confirming it needs pressure readings and a circuit check on site.
Who it's for
Your window or portable unit cools slowly
We check circuit pressure, locate and repair the leak, then vacuum and charge to the type shown on your unit's nameplate.
Ask on WhatsAppYour cold room or commercial fridge will not hold temperature
We measure pressure, identify why the cabinet temperature is rising, repair any leak found, then charge to the correct refrigerant type for that unit.
Ask on WhatsApp
What the work covers
- Pressure check and leak location
- Leak repair before charging
- Vacuum and tightness test
- Charge to nameplate refrigerant
- Run test and performance check
How we work
How we work
- 1
Inspect and locate leak
The technician measures circuit pressure and checks joints and components that corrode in Jeddah's humid, salty air, pinpointing the leak before any other step.
- 2
Repair the leak
The technician repairs the leak point, whether a loose joint, a cracked pipe or corrosion in part of the circuit. The unit is not charged until the repair is confirmed tight.
- 3
Vacuum and pressure test
The circuit is evacuated with a vacuum pump to remove air and moisture, then the reading is watched to confirm pressure holds before refrigerant is introduced.
- 4
Charge and run
The unit is charged to the nameplate type and amount, then run and checked for proper performance on site before handover.
Fix the leak or just top it up?
| Alrabih | The usual way | |
|---|---|---|
| The leak | Found and fixed first | Often ignored |
| Vacuum | Before every charge | Sometimes skipped |
| Refrigerant type | As the nameplate states | May be mixed or swapped |
| Compressor | Protected by correct charge | Worn by wrong charge |
| Refrigeration equipment | AC, fridges and cold rooms | Usually AC only |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Al Ruwais is a modern central Jeddah neighbourhood with hotels, office towers and tall residential buildings, mostly fitted with central AC or large chiller systems. These complex systems cover hundreds of rooms and floors, and refrigerant leaks can be in long piping, multiple joints or the compressor itself, requiring advanced diagnostics and regular maintenance to avoid system-wide shutdown and major economic loss.
Al Ruwais sits in central Jeddah, a modern district of hotels, office towers and closely spaced tall residential buildings.
Most tall buildings here use central chiller units connected by long copper lines, with advanced thermostatic control on each floor.
The AC setup in Al Ruwais
- 1
Large central chiller for tall buildings
Hotels and office towers here use one or more central chillers that cool water circulating through distribution systems on all floors.
- 2
Long copper distribution piping
Refrigerant is pumped through long copper networks from the plant room to upper and lower floors, with multiple joints and thermal insulation.
- 3
Advanced thermostatic control units
Each floor or section has its own thermostatic unit controlling temperature and humidity independently from other areas.
Before the visit
Before our visit in Al Ruwais
- 1
Contact the maintenance chief or building manager beforehand
Towers and hotels need advance coordination with the maintenance manager to schedule checks at a time that does not disrupt building or hotel operations.
- 2
Prepare the system blueprints and technical drawings
If system blueprints and refrigerant routing diagrams are available, that helps us quickly locate pipes, connections and the compressor.
- 3
Provide inspection and maintenance logs
Previous inspection and maintenance logs help us identify recurring problems, required pressure and refrigerant, and the history of past repairs.
More districts for Refrigerant charging
Other services in Al Ruwais
FAQ
Questions about Refrigerant charging
Can you just add refrigerant without looking for the leak?
A sealed refrigerant circuit does not consume refrigerant. A low charge means there is a leak somewhere. Adding refrigerant without finding and repairing that leak brings the same fault back quickly and can damage the compressor. The correct sequence is always to locate the leak, repair it, pull a vacuum on the circuit, and then charge to the type and quantity shown on the unit's nameplate.
Where does refrigerant leak in commercial refrigeration equipment?
The most common points are expansion fittings and restrictions on the liquid line, flare joints at the evaporator and condenser, and service valves where the rubber seals have aged. In commercial refrigeration, old copper pipe welds weakened by continuous compressor vibration are also a frequent source. The exact location is found during the site inspection.
Does the refrigerant type affect how the unit performs?
Yes. Every unit is designed for a specific refrigerant type with defined operating pressures and heat transfer properties. Using a different type changes those pressures and can either overload the compressor or reduce cooling output. For this reason the unit is always charged with the exact type shown on its nameplate and no substitute is used.
Is the charging work different for a home AC unit and a commercial refrigerator?
Yes, they differ in several ways. Commercial refrigeration units operate at pressures and with refrigerant types distinct from those in air conditioners, and their target temperatures are much lower. The pipe circuits are also longer and often include multiple distributors and valves that require careful inspection before vacuuming and charging. The nature of each circuit determines the procedure.
Is the charging work different for a home AC unit and a commercial refrigerator?
The core steps are the same: locate the leak, repair it, vacuum the circuit, then charge to the nameplate type. Commercial refrigeration units sometimes have additional valves and components that require a different inspection approach. What each unit needs is determined by the technician on site after pressure readings and a circuit check.
Do large hotels and towers need constant refrigerant monitoring?
Yes, large hotels depend on guest comfort, so any leak affects reputation and revenue; we recommend checks every 3 months and ongoing preventive maintenance.
What is the leak risk for long refrigerant pipes in towers?
Long pipes and many joints increase potential leak points, especially if connections and seals are not regularly serviced. Our regular checks catch corrosion early before leaks happen.
How do central Jeddah's humidity and constant heat affect large refrigerant systems?
High humidity and continuous heat increase pipe stress and accelerate oxidation, especially in areas exposed to salt-laden coastal air, shortening line and joint lifespan.
How many technicians do you need to check a large chiller system?
It depends on the system size and complexity, but we typically send a team of two or three trained technicians to check the compressor, pipes, connections and condenser using advanced diagnostic equipment.
