Window unit fitted right
Window AC installation in Al Sahifah
Installing window AC in Al Sahifah, central Jeddah, demands tight sealing against high noise, urban dust and humidity. Alrabih ensures safe drainage and strong frame sealing to protect residential flats and shops.
- Firm frame
- Sealed gaps
- Outward drain
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
When a window unit is the right choice
- 1
A room with no outdoor unit space
Some rooms have no wall facing a suitable space for an outdoor unit. A window AC is the practical answer: one unit in the opening cools the room and expels heat directly outside.
- 2
An annex, staff housing or storeroom
Annexes, staff rooms and warehouses need real cooling without the cost of long copper and cable runs. A window unit suits these spaces well when the right opening exists or can be made.
- 3
An existing window of the right size
When a wall already has a window opening that matches the unit you have chosen, the frame fits straight in without cutting new concrete. We confirm at the survey that the opening suits the unit and the wall carries the load.
Who it's for
Need to cool a maid's room or home annex
We survey the opening or proposed wall in the annex, fit the unit in a secure frame and seal every gap so no hot humid air enters the space.
Ask on WhatsAppManaging a staff housing building that needs practical cooling
We survey each room and its existing openings, then install units in level frames with the correct outward tilt in every room as the survey findings direct.
Ask on WhatsApp
What the installation covers
- Opening and wall check
- Frame levelled and secured
- Gaps sealed with insulation
- Drainage tilt adjusted
- Unit started and tested
How we work
How we work
- 1
Send a photo
WhatsApp us a photo of the opening or the proposed wall and your district, so the technician arrives with the right frame and fixings.
- 2
Site survey
On site the technician measures the opening, checks the wall, confirms there is a suitable power point near the unit, and agrees with you on any changes needed before starting.
- 3
Fit and seal
We fit the frame level, set the unit with the correct outward tilt, then seal every gap around the frame so no hot air, dust or humidity enters.
- 4
Start-up and handover
We run the unit, check the cooling and confirm condensate flows outward, then leave the space clean and show you how to clean the filter.
Proper installation or just placing the unit?
| Alrabih | The usual way | |
|---|---|---|
| Frame | Level and firmly secured | Propped without fixing |
| Gaps | Sealed with insulating materials | Open or thin plastic |
| Tilt | Outward fall drains water | Level or tilted inward |
| Power | Dedicated nearby socket | Extension from another room |
| Site cleanliness | Space left clean | Dust and debris left behind |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Al Sahifah is central Jeddah's mixed district with multi-storey residential blocks and ground-floor shops, a varied mix of older and newer buildings. Busy streets bring noise, dust and vehicle fumes, and tight building gaps limit natural airflow. Windows may be narrow or uneven in older blocks, so we carefully inspect each frame, use noise and dust-blocking seals, and coordinate with flat occupants or shop owners to ensure safe, smooth fitting.
Al Sahifah sits in central Jeddah, a dense urban district mixing residential blocks, shops and offices around busy central markets.
Most window units in Al Sahifah face busy streets or squares, exposing them to daily noise, dust and exhaust fumes.
The AC setup in Al Sahifah
- 1
Closely built apartment blocks with street-facing windows
Most flats in Al Sahifah have windows facing the busy street directly, requiring strong sealing against noise and dust.
- 2
Ground-floor shops with flats above
Al Sahifah's typical design stacks ground shops under residential flats in the same block, requiring coordination with the shop owner when fitting a flat upstairs.
- 3
Varied windows in older and newer buildings
Al Sahifah mixes older buildings with narrow, less robust windows and newer ones with high-spec windows.
Before the visit
Before our visit in Al Sahifah
- 1
Coordinate with neighbours and any ground-floor shop
If the flat is above a shop, inform the owner about the visit time. Tell neighbours in the floor to avoid disruption from fitting works.
- 2
Measure the window carefully and check its strength
Send us measurements in centimetres and confirm the frame and glass are not cracked. If the window is very narrow, let us know in advance.
- 3
Confirm safe access from inside and outside
Check that the flat and external space allow safe team access, especially if the window is high or the balcony is tight.
More districts for Window AC installation
Other services in Al Sahifah
FAQ
Questions about Window AC installation
Can you cut a new opening in the wall if there is none?
Yes, if no suitable opening exists we can cut one. At the survey we check the wall type and thickness and look for columns or cables that might be in the way, then agree the best position with you before any cutting begins.
Why does the outward tilt matter on a window unit?
A window unit produces condensate on its indoor side throughout operation. If the unit sits level or tilts inward, water pools in the base and runs down the inside wall. A slight outward tilt sends that water to the back of the unit and out, away from the wall and furniture.
How do you seal the gaps around the frame given Jeddah's climate?
Jeddah combines high heat, humidity and salty sea air, so sealing materials must hold up in those conditions. We use insulating and sealing materials suited to the opening and wall type, and the survey determines the right choice based on the gap size and wall construction.
Does a window unit need its own power point?
A window unit draws a high current at start-up, and sharing a socket with other appliances strains the wiring and trips the breaker. The technician checks at the survey that a suitable socket is close to the unit position, and if one is not there we explain what is needed before installation proceeds.
Does the weight of a window unit affect how it is fixed?
Yes, the unit's weight directly affects how the frame is fixed and what support is needed. A concrete wall requires different treatment from a brick wall, and a wide opening needs more support than a narrow one. The technician decides at the survey what fixing method and materials suit the unit and the wall.
The street is very busy and noisy, does a window unit reduce outside noise?
We use strong sealing and noise-reducing silicone around the frame to limit noise entry. Tight sealing helps, but the window glazing itself matters too; thicker glass reduces noise better.
Car dust gets everywhere, how do you protect the window unit?
We use high-grade weatherstripping and dust-resistant silicone in every opening. We recommend regular cleaning of the unit's indoor filters to reduce dust buildup.
The flat is high up and the window is narrow, can you fit the unit?
We inspect the window first. If the dimensions allow a window unit, we fit it. If it is too narrow, we may recommend a split system or alternative suited to your space.
The building is old and walls get damp sometimes, does this affect the fit?
We inspect the wall and frame carefully. If there is old moisture damage, we ensure very strong sealing to prevent water re-entry. We may recommend addressing the damp before fitting.
