Window unit fitted right
Window AC installation in Al Sawari
Installing window AC in Al Sawari demands precision in levelling the frame and sealing against coastal winds and humidity. Alrabih ensures each unit is mounted with a slight outward tilt to drain condensate safely without leaking into the walls.
- Firm frame
- Sealed gaps
- Outward drain
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
When a window unit is the right choice
- 1
A room with no outdoor unit space
Some rooms have no wall facing a suitable space for an outdoor unit. A window AC is the practical answer: one unit in the opening cools the room and expels heat directly outside.
- 2
An annex, staff housing or storeroom
Annexes, staff rooms and warehouses need real cooling without the cost of long copper and cable runs. A window unit suits these spaces well when the right opening exists or can be made.
- 3
An existing window of the right size
When a wall already has a window opening that matches the unit you have chosen, the frame fits straight in without cutting new concrete. We confirm at the survey that the opening suits the unit and the wall carries the load.
Who it's for
Need to cool a maid's room or home annex
We survey the opening or proposed wall in the annex, fit the unit in a secure frame and seal every gap so no hot humid air enters the space.
Ask on WhatsAppManaging a staff housing building that needs practical cooling
We survey each room and its existing openings, then install units in level frames with the correct outward tilt in every room as the survey findings direct.
Ask on WhatsApp
What the installation covers
- Opening and wall check
- Frame levelled and secured
- Gaps sealed with insulation
- Drainage tilt adjusted
- Unit started and tested
How we work
How we work
- 1
Send a photo
WhatsApp us a photo of the opening or the proposed wall and your district, so the technician arrives with the right frame and fixings.
- 2
Site survey
On site the technician measures the opening, checks the wall, confirms there is a suitable power point near the unit, and agrees with you on any changes needed before starting.
- 3
Fit and seal
We fit the frame level, set the unit with the correct outward tilt, then seal every gap around the frame so no hot air, dust or humidity enters.
- 4
Start-up and handover
We run the unit, check the cooling and confirm condensate flows outward, then leave the space clean and show you how to clean the filter.
Proper installation or just placing the unit?
| Alrabih | The usual way | |
|---|---|---|
| Frame | Level and firmly secured | Propped without fixing |
| Gaps | Sealed with insulating materials | Open or thin plastic |
| Tilt | Outward fall drains water | Level or tilted inward |
| Power | Dedicated nearby socket | Extension from another room |
| Site cleanliness | Space left clean | Dust and debris left behind |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Al Sawari is a moderately dense residential area with villas and multi-storey apartment blocks, many of which have the wide windows that suit window units. The northern coastal winds and high humidity make sealing around the frame critical to block warm air, salt and dust, which is why we inspect wall and frame strength before fitting.
Al Sawari sits in northern Jeddah, a relatively modern residential district mixing apartment blocks and villas near the seafront.
Most window units in Al Sawari face north or east, requiring strong sealing against cold winds and sea salt spray in winter months.
The AC setup in Al Sawari
- 1
Wide windows in villas and apartment blocks
Most modern villas and apartment blocks in Al Sawari have standard wide windows that suit window units readily.
- 2
Strong aluminium frames and thick sills
The modern construction in Al Sawari provides sturdy aluminium frames and thick window sills that bear the weight without major extra bracing.
- 3
Clear external drainage path for water
Most windows in Al Sawari have a clear external drainage path, making it easy to ensure water flows away from interior walls.
Before the visit
Before our visit in Al Sawari
- 1
Measure the window and check it is level
Send us the window measurements in centimetres (height and width) and confirm the frame is level using a spirit level before we visit.
- 2
Confirm safe outdoor access
Check that the team can safely reach the outside of the window, especially if it is on an upper floor or near a balcony edge.
- 3
Coordinate with neighbours if needed
If the window is shared with a neighbour or on a party wall, let them know about the fitting time in advance to avoid disturbance.
More districts for Window AC installation
Other services in Al Sawari
FAQ
Questions about Window AC installation
Can you cut a new opening in the wall if there is none?
Yes, if no suitable opening exists we can cut one. At the survey we check the wall type and thickness and look for columns or cables that might be in the way, then agree the best position with you before any cutting begins.
Why does the outward tilt matter on a window unit?
A window unit produces condensate on its indoor side throughout operation. If the unit sits level or tilts inward, water pools in the base and runs down the inside wall. A slight outward tilt sends that water to the back of the unit and out, away from the wall and furniture.
How do you seal the gaps around the frame given Jeddah's climate?
Jeddah combines high heat, humidity and salty sea air, so sealing materials must hold up in those conditions. We use insulating and sealing materials suited to the opening and wall type, and the survey determines the right choice based on the gap size and wall construction.
Does a window unit need its own power point?
A window unit draws a high current at start-up, and sharing a socket with other appliances strains the wiring and trips the breaker. The technician checks at the survey that a suitable socket is close to the unit position, and if one is not there we explain what is needed before installation proceeds.
Does the weight of a window unit affect how it is fixed?
Yes, the unit's weight directly affects how the frame is fixed and what support is needed. A concrete wall requires different treatment from a brick wall, and a wide opening needs more support than a narrow one. The technician decides at the survey what fixing method and materials suit the unit and the wall.
Can the modern windows in Al Sawari take the weight of a window AC unit?
We inspect the window frame and surrounding wall before fitting to confirm they can safely bear the weight. If needed, we add metal brackets to distribute the load evenly.
The northern sea winds are strong here, how do you seal the unit?
We use high-density foam and weatherstripping around every edge of the frame, plus salt-resistant silicone sealant in the gaps.
Humidity in Al Sawari is very high, does this affect the condensate drainage from the window unit?
Yes, we tilt the unit about 3 degrees outward to ensure condensate flows away from the wall, and we confirm the drainage opening is clear and not blocked.
Can the window unit be fitted without weakening the building structure?
We select the window location carefully and never drill into load-bearing parts. Metal brackets attach to the frame and sill only, not to structural walls.
