Window unit to split
Window-to-split conversion in Al Rabiyah
In Al Rabiyah south Jeddah, modern residential buildings house spacious flats with beautiful large windows, yet old window units block that light and trap noise. We remove the old unit, seal the opening with precision and strong insulation, then fit a modern split in a separate core to restore light and quiet.
- Sealed opening
- Window restored
- Quiet split
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Why owners make the switch
- 1
Non-stop noise from the old unit
The window unit motor runs right inside the room, and the vibration gets worse over the years. Many owners say sleeping next to it has become impossible, and switching to a split removes the source entirely.
- 2
The wall opening lets in heat and dust
The foam and tape sealing the gap around a window unit frame degrade in Jeddah's salty, humid air. The large opening becomes a clear source of heat loss, dust in the windy season and sometimes rain in winter.
- 3
The blocked window darkens the room
A window unit fills the whole window or most of it, so the room loses its natural light and ventilation at times when you do not need cooling. Getting the window back fully changes the room noticeably.
Who it's for
Own a villa and want the windows back
We remove the window units from your villa rooms, close each opening with block, insulation and plaster, then fit a split in each room through its own core hole.
Ask on WhatsAppManaging a rental flat and want to raise its value
We convert the flat's window unit to a quiet split and restore the wall and window to their original condition, improving the unit for the next tenant.
Ask on WhatsApp
What the conversion covers
- Remove old unit and frame
- Block plaster and insulation
- Paint inside and outside
- New core hole for split
- Insulated copper and drain
How we work
How we work
- 1
Survey the wall and opening
We check the wall thickness and the build around the old opening, agree where the new core hole for the split goes away from the old frame, and decide where the outdoor unit will sit.
- 2
Remove and close
We remove the window unit and its frame without breaking the surrounding wall, then close the opening with blockwork or lightweight concrete to match the original construction, with thermal insulation set inside the layers before plastering.
- 3
Plaster and paint both sides
We plaster and paint the closed opening on both the inside and outside faces to match the existing wall, leaving no trace of the old opening that could let in air or moisture.
- 4
Fit the new split
We core the agreed spot for the split, run insulated Mueller copper and a drain line with the correct fall, vacuum the line before start-up and test everything with you present.
A proper seal or a quick patch?
| Alrabih | The usual way | |
|---|---|---|
| Closing the opening | Block, plaster and insulation | Foam or a timber board |
| Outside face | Plastered and painted flush | Visible mark or cracks |
| Thermal insulation | Inside wall before plastering | None |
| New split core hole | Chosen away from old frame | Wherever drilling is easiest |
| Outside paint | Matched to existing wall colour | Different colour or unpainted |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Al Rabiyah is a relatively modern district with new apartment buildings spaced apart; the flats are spacious and bright with large windows facing gardens and open areas. Old window units block these attractive windows and produce high noise, and when removed they leave gaps through which heat and dust easily enter. Converting to split in Al Rabiyah requires precise sealing of the original opening with paint matching the modern interior décor, the outdoor unit mounted on a relatively spacious balcony away from the main façade, and the copper lines easily hidden within modern walls.
Al Rabiyah is in south Jeddah, a modern district with spacious apartment blocks and large-windowed flats designed for light and openness.
Most Al Rabiyah flats have multiple large windows, and window units block a significant portion of them, so converting to split recovers much natural light.
The AC setup in Al Rabiyah
- 1
Single split for a main living area
Spacious Al Rabiyah flats need one powerful split for the main living area with natural air circulation to other rooms.
- 2
Copper run hidden in modern walls
Modern walls in Al Rabiyah allow the copper line between units to be hidden easily without visual impact on the décor.
- 3
Mounting on a side or rear balcony
Adequate space on side and rear balconies allows flexible placement of the outdoor unit away from the front façade.
Before the visit
Before our visit in Al Rabiyah
- 1
Choose the best outdoor-unit location
Inspect your balconies and identify the best spot away from main windows and relaxation areas, then let us know your preference before we visit.
- 2
Confirm electrical supply near the chosen location
Check that there is an electrical outlet near the outdoor unit location, or that cables can be safely run from your distribution board.
- 3
Choose paint and finish for the sealed opening
Prepare a paint sample or tile colour match so we can perfectly blend the sealed opening with your existing décor.
More districts for Window-to-split conversion
Other services in Al Rabiyah
FAQ
Questions about Window-to-split conversion
Do you restore the original window after closing the AC opening?
It depends on what the original opening was. In some rooms the opening was cut into a solid wall with no window frame, so it is fully closed. If the original build can take a window, we discuss that at the survey and tell you what is actually possible in your wall.
Can the old window unit hole be reused as the new split core hole?
The old opening is usually much larger than the small core a split needs, and its position may not suit the copper and drain route. It is safer to close it fully and drill a new hole in the right place, so no hidden gaps remain to let air through or collect moisture.
How do you stop humid salty air coming through the closed opening?
We place thermal insulation inside the wall layers before plastering, and use sealing materials that form a continuous barrier from inside to outside. Jeddah's combination of humidity and salt accelerates the breakdown of any temporary patch, so we treat the closed opening as a new wall section, not a surface repair.
Do I need permission from the building management before closing the opening?
In a rented flat it is wise to check with the owner or management office first, because the work changes the building's outside face. In a villa you own the decision is yours. We explain the full scope at the survey so you can get any approval needed before the work day.
Does the job change if the wall is concrete rather than block?
Yes. A concrete wall needs a different filling method and may require a repair mix rather than standard block. We identify the wall type at the survey and choose the material that bonds solidly with the existing concrete, leaving no hidden gaps for moisture to enter later.
My flat overlooks a lovely park; will the split unit spoil that view?
We mount the outdoor unit on a side or rear balcony away from the main sightline, and the indoor unit is compact and positioned on a wall away from the window.
My flat is newly decorated; will the sealing match the modern design?
We select paint and finishing that perfectly match your walls, and if you wish we can add a small decorative touch to conceal the original opening.
Al Rabiyah is inland; is the air cleaner there?
Yes, Al Rabiyah is less affected by coastal humidity and salt than coastal districts, but the outdoor unit still needs periodic cleaning to maintain peak efficiency.
My balcony is spacious; do we have flexibility in placing the outdoor unit?
Yes, we can choose the best position on your spacious balcony away from windows and seating areas, and we will consult you on the options before installation.
