Warehouse Cooling
Warehouse HVAC in Al Fanar
In Al Fanar, far north Jeddah, sprawling large warehouses sit beneath high metal roofs exposed directly to intense sun and coastal winds. We install robust multi-unit cooling systems designed to handle the extreme heat load and coastal humidity.
- Zone control
- Stock protection
- Directed ventilation
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
When your warehouse needs a proper HVAC system
- 1
Heat that damages stored stock
Food, pharmaceutical and electronics stock all have storage temperature limits. When a metal warehouse roof bakes under Jeddah's sun, the air inside becomes a direct threat to shelf life and product quality. The solution starts with a survey of the racking layout to find the critical zones.
- 2
Workers overheating in the picking area
Workers in the picking and loading area move constantly under a hot roof. Natural ventilation alone is not enough in summer. We choose between direct cooling and evaporative cooling based on a site survey and the indoor humidity level.
- 3
Warehouse offices that are never comfortable
Supervisor and reception offices have different needs from the large storage hall. Putting them on one system raises cost and weakens performance in both areas. We give the office zone its own system and link it to the warehouse with pressure-control points.
Who it's for
Storing heat-sensitive stock in a warehouse
We locate the critical zone in the racking layout and design an independent cooling system with its own controls, keeping that area at a safe temperature separate from the rest of the warehouse.
Ask on WhatsAppBuilding a new warehouse and need HVAC from the start
We join the project at design stage before the roof closes, mapping cooling zones, ventilation and duct routes to fit the racking plan and loading doors from the outset.
Ask on WhatsApp
What the system covers
- Racking layout and zone map
- Cooling units per zone
- Ductwork from our workshop
- Independent controls per zone
- Airflow check after start-up
How we work
How we work
- 1
Site survey
We visit the warehouse, measure the internal height, review the racking layout and the positions of loading doors and offices, then map the main thermal zones before proposing any system.
- 2
System design and zoning
We design a system for each zone: central or split units for offices and critical stock areas, and evaporative or mechanical ventilation for the picking area where indoor humidity allows it.
- 3
Duct fabrication and installation
We fabricate round and rectangular ductwork in our workshop from G90 galvanised sheet to the site dimensions, insulate with Armaflex or Kimmco materials, then mount the units, run the copper and connect the control points.
- 4
Start-up and handover
We start each zone separately, measure airflow at multiple points across the warehouse floor, and check that all drain lines are clear before handing over.
A zoned system or unplanned scattered units?
| Alrabih | The usual way | |
|---|---|---|
| Zone design | Surveyed and mapped before fitting | Units added when complaints come |
| Ductwork | Fabricated to site dimensions | Flex duct without calculation |
| Evaporative cooling | Where humidity allows it | Fitted without measuring humidity |
| Sensitive stock | Separate zone with its own control | Left in the general air |
| Copper runs | Mueller, weld-free to 30 m | Multiple welded joints |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Al Fanar is a vast industrial zone with large-scale warehouses and factories under very high metal roofs, positioned close to the coast where humidity and salt air affect equipment and stored goods. Streets here are wider and perimeter spaces more open, making it easier for our team and heavy equipment to access. Most large warehouses need powerful central cooling with multiple outdoor units on expansive rooftops, and we coordinate installation and regular maintenance schedules with management to counter humidity and salt-air effects.
Al Fanar sits at the far north of Jeddah near the coast, a massive industrial zone of very large warehouses with high metal roofs and wide streets.
Large warehouses in Al Fanar typically employ advanced central cooling with multiple comprehensive outdoor units sited on very elevated rooftops.
The AC setup in Al Fanar
- 1
Central system with multiple rooftop units on elevated roof
Large Al Fanar warehouses use multiple outdoor units (3 to 5 or more) on the very high roof, with comprehensive ductwork distributed to every section.
- 2
Smart control systems per zone
Modern systems allow individual temperature and humidity control for each warehouse section according to its stored goods type.
- 3
Salt and mould protection units
Coastal location demands outdoor units with salt-resistant and corrosion-resistant materials, plus extra filters to protect interior evaporators from salt and humidity.
Before the visit
Before our visit in Al Fanar
- 1
Provide complete warehouse plan with section layout
Send us a comprehensive warehouse diagram showing all sections, goods in each area and total floor space.
- 2
Verify roof and structural soundness
Confirm the metal roof and supporting structures are sound and can bear the weight of multiple heavy cooling units.
- 3
Arrange installation and maintenance schedule with management
Agree on an installation and maintenance schedule (especially outdoor unit cleaning) that fits the warehouse's continuous operations.
More districts for Warehouse HVAC
Other services in Al Fanar
FAQ
Questions about Warehouse HVAC
Is evaporative cooling right for a warehouse in Jeddah?
It depends on indoor humidity levels and the type of stock stored. In well-ventilated open areas where stock is not sensitive to a small rise in humidity, evaporative cooling can work well. The site survey gives a clear answer before any decision is made.
How do you handle the height in tall warehouse bays?
In a tall bay, cool air settles low and hot air rises, which works in your favour when diffusers are aimed correctly at the working level and the racking. We set diffuser angles and positions during design based on the racking height and the movement aisles.
Can cold storage zones link to the rest of the warehouse system?
Cold rooms and freezer rooms run on their own refrigeration systems, which we install as a separate service. What we handle here is the ambient air around those room doors, so warm warehouse air does not rush in when they open, managed by pressure zoning between the two spaces.
Do warehouse air ducts need insulation?
Yes, especially ducts that run close to the hot metal roof. Without insulation, cool air gains heat before it reaches the diffusers and loses much of its effect. We insulate with Armaflex or Kimmco materials and seal joints with Foster sealants to stop air leaks.
Does airflow distribution differ between tall racking aisles and open floor areas?
Yes. In tall racking aisles the airflow path narrows and slows, so we choose directional diffusers that push air along the aisle length rather than spreading it sideways. In open floor areas we use wider-angle diffusers. The angle and position of each diffuser are set at design stage based on the aisle width and racking height.
Our warehouse is vast, can one system cover it all?
No, vast warehouses require multiple outdoor units and extensive ductwork divided by warehouse sections. We assess size and heat load, then install a system that efficiently covers every area.
We are close to the sea, does salt air damage the equipment?
Yes, coastal humidity and salt air accelerate corrosion of metal components. We recommend regular maintenance and frequent cleaning of outdoor units to reduce salt and mould buildup.
Can all units mount on the roof or do some need to be ground-level?
Most outdoor units mount on the high roof, but some warehouses may need an additional ground-level unit depending on section layout and heat load. We survey the site and recommend the best arrangement.
Outdoor cooling gear is exposed to the elements, does it need extra protection?
Yes, we recommend installing metal guards around outdoor units to reduce wind, salt and dust impact, and to ease regular cleaning.
