Window AC repair
Window AC repair in Al Widad
In Al Widad, east Jeddah, window units fill residential flats and face leaks, noise and cooling loss from dust and humidity buildup. We diagnose the real fault and repair what is worth fixing without rushed replacement.
- Accurate diagnosis
- Capacitor repair
- Rust treatment
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
When your window unit needs attention
- 1
Weak cooling even on full power
The room stays warm even with the unit running at full. Most often the coil or filter is blocked with the dust and salt Jeddah's air carries; cleaning them brings the cooling back without any parts.
- 2
Water leaking into the room
Dripping inside the room does not always mean a mechanical fault. The unit needs a slight tilt toward the outside so condensate runs away. We check the tilt, the drain tray and the drain holes before anything else.
- 3
Loud noise or a fan that will not spin
Grinding or heavy vibration usually points to a fan with broken blades, a worn shaft or a foreign object inside the unit. A fan that does not start while the compressor hums is often a failed run capacitor.
Who it's for
Your flat's window unit drips onto the floor
We check the unit tilt, drain tray and drain holes on site and correct the real cause so the dripping does not return.
Ask on WhatsAppYour shop's window unit runs but does not cool
We diagnose the coil, filter, capacitor and thermostat at your shop and carry out the repair needed to restore cooling with the least disruption to your business.
Ask on WhatsApp
What the repair covers
- Filter and coil cleaned
- Capacitor relay and thermostat tested
- Fan blades and shaft checked
- Tilt and drain tray corrected
- Chassis rust report provided
How we work
How we work
- 1
Describe the fault
WhatsApp us what is happening: noise, drip or weak cooling. A photo of the front of the unit helps us know the model before the visit.
- 2
On-site diagnosis
The technician checks the filter, coil, fan, capacitor and thermostat in order, then tells you the real cause and what the repair needs before he starts.
- 3
Repair or replace call
If the repair is practical we complete it in the same visit. If the unit is old, the chassis is deeply rusted or the compressor fault is complex, we say so plainly and explain your options.
- 4
Run test and handover
After the repair we run the unit, check the cooling, confirm the drain flows and watch the current settle, then leave the room clean.
Real diagnosis or a quick guess?
| Alrabih | The usual way | |
|---|---|---|
| First step | Systematic check of each part | Replace the easiest part |
| Rust | Honest chassis assessment | Ignored until it worsens |
| Dripping | Tilt and tray checked first | Refrigerant added without diagnosis |
| Replace decision | Based on actual condition | May be rushed or delayed |
| Refrigerant type | Read from the unit nameplate | Wrong type may be added |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Al Widad is a close-built residential district with medium-sized flats relying heavily on older window units for main rooms. Dust from nearby roads and coastal humidity quickly affect the coil and condenser, and the drain clogs easily because water carries sediment and salt. On-site repair is usually cheaper and faster than planning replacement.
Al Widad is a high-density east residential district of mid-age flats, each holding one or more window units.
Most units mount in east or south-facing bedroom windows, draining directly to ground or external passages.
The AC setup in Al Widad
- 1
Window unit with no external drain piping
Most units here have no extended drain piping, with water running straight down the facade.
- 2
Various unit sizes across the district
Flats vary in size, so units range from 1 to 1.5 tons of cooling capacity.
- 3
Drains clogged with salt and sediment
Water absorbed from coastal air carries salt and sediment that quickly clog the drain and cause pooling.
Before the visit
Before our visit in Al Widad
- 1
Tell us the window type, size and floor level
Specify whether the window is standard or sliding, its approximate size, and the floor level, so we bring the right tools.
- 2
Ensure access from both inside and outside is clear
Check that the room and external balcony or passage are clear and safe to stand on during inspection and repair.
- 3
Disconnect power before our visit
Cut power to the window unit so we can safely inspect and repair it without electrical hazards.
More districts for Window AC repair
Other services in Al Widad
FAQ
Questions about Window AC repair
Can a window unit be repaired in the same visit?
Many faults, a clogged filter, a dirty coil, a failed run capacitor and a wrong tilt, are fixed in a single visit. If the unit needs a part the technician does not carry, we arrange a second visit once it is sourced.
How does Jeddah's salty air affect a window unit?
The damp salty air from the sea speeds up corrosion on the metal chassis, fan blades and coil fins. Units on sea-facing walls or higher floors corrode faster. We check how deep the rust goes and tell you honestly whether the unit is worth repairing or whether the chassis has reached the point where replacement saves more.
The unit runs but the compressor will not start. What causes that?
The most common cause is a failed run capacitor that can no longer give the compressor or fan the starting push it needs. The relay is the second likely cause. The technician tests both with instruments and confirms which is at fault before replacing anything.
Why does my window unit drip water into the room?
A window unit drains condensate out of the back, so if it tilts inwards or the drain holes in its base block, the water comes back into the room. We reset the tilt slightly outwards, clean the pan and drain holes, and check the frame is sealed so no water runs down the sides.
Can a faulty thermostat cause the compressor to cycle on and off rapidly?
Yes. A faulty thermostat can send wrong signals that make the compressor cut in and out abnormally, straining the circuit and reducing cooling. The technician tests the thermostat with instruments and separates it from other causes such as the relay or a supply voltage issue before any part is replaced.
My unit makes a grinding noise, must I replace it?
The noise usually comes from a dirty or loose blower, or bearings needing lubrication. We diagnose it exactly, clean it or fix the mounting, and if needed, we tell you the replacement cost.
The flat is on a high floor, can you safely reach my unit?
Yes, we work at various heights, but we need a safe access method like a stable balcony or proper safety equipment confirmed before the visit.
The road opposite my flat is very dusty, does this speed up unit deterioration?
Yes, road dust blocks the coil faster, reducing cooling and efficiency. We recommend coil cleaning every two to three months in such a location.
My flat's wiring is old, does it affect the window unit?
Yes, weak or improperly grounded wiring reduces voltage to the unit and causes poor performance. We check the connection and voltage during inspection.
