Central AC for apartments
Apartment central AC in Al Mawaddah
In Al Mawaddah, east Jeddah, central AC installation for apartments needs precision in siting the indoor unit because ceiling voids are tight and space is limited. Alrabih's team finds the best spot in the hallway or bathroom, runs the drain cleanly, and distributes air quietly throughout without disturbing neighbours.
- Tight ceiling
- Sealed drain
- Quiet running
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
When central AC makes sense in your flat
- 1
New flat before finishing
The finishing stage is the right time to install central AC. The ceiling is open and walls are ready for copper and drain routes, so there is no need later to cut plaster or damage finished surfaces.
- 2
Occupied flat where splits fall short
If splits leave hot and cold patches, or the noise bothers you at night, central AC distributes air evenly and hides the unit away from the room. A site survey decides whether your ceiling height allows it.
- 3
Your unit disturbs the neighbours
In apartments, neighbours hear unit vibration through shared ceilings and walls. We choose the indoor unit suspension point carefully and use flexible collars on the air outlets to absorb vibration before it reaches the building structure.
Who it's for
Living in a furnished flat and want to replace splits
We survey your ceiling void to see whether a concealed unit fits, then run copper and drain without disturbing the existing décor.
Ask on WhatsAppBuying a flat in a building under construction
We coordinate with the finishing stage to run copper, drain and ducts before ceilings and walls are closed, so every route stays fully concealed.
Ask on WhatsApp
What the installation covers
- Ceiling survey and unit position
- Mueller copper fully insulated
- Condensate drain with correct fall
- Air ducts and distributed outlets
- Line vacuum and start-up test
How we work
How we work
- 1
Ceiling and route survey
We measure the available ceiling void, decide where the indoor unit hangs, map the copper route and find where condensate drains without causing damp. The survey decides whether one zone or more suits the flat.
- 2
Run copper and drain
We run insulated Mueller copper in the void above the suspended ceiling and slope the condensate line towards the building drain or an external outlet, so no standing water causes odour or damp.
- 3
Fit ducts and outlets
We mount the indoor unit on vibration-absorbing hangers, route ducts to each room and place every outlet so air spreads evenly without blowing cold air directly onto anyone.
- 4
Vacuum, test and hand over
We vacuum the copper line to remove air and moisture, check all joints, then run the unit and confirm cooling in every room before we hand over.
A considered install or a hasty one?
| Alrabih | The usual way | |
|---|---|---|
| Indoor unit position | Set after measuring the void | Wherever it fits |
| Condensate drain | Calculated fall to building drain | May pool and cause damp |
| Vibration | Absorbing hangers, flexible collars | Reaches the neighbours |
| Air distribution | Outlets placed for even spread | Cold rooms and warm rooms |
| Salty sea air | Mueller copper, tight flared joints | Early joint corrosion |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.

Split AC installation
Request this service
Duct installation
Request this service
Central AC installation
Request this service
Duct fabrication
Request this service
Cold room installation
Request this service
Electro-mechanical works
Request this service
Chiller & AHU installation
Request this service
HVAC design
Request this service
AC repair & faults
Request this service
AC cleaning
Request this service
Refrigerant charging
Request this service
Central AC maintenance
Request this service
Chiller maintenance
Request this service
AC removal & refitting
Request this service
Duct cleaning & sanitising
Request this service
AC servicing by brand
Request this service
Operation & maintenance contracts
Request this service
AHU maintenance
Request this service
Fridge & freezer service
Request this service
Cold rooms
Request this service
Display fridges & chillers
Request this service
Factory HVAC
Request this service
Warehouse HVAC
Request this service
Villa & home HVAC
Request this service
Hotel HVAC
Request this service
School HVAC
Request this service
Hospital HVAC
Request this service
Mosque HVAC
Request this service
Mall & retail HVAC
Request this service
Restaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.

What sets this district apart
Most Al Mawaddah flats are relatively modern with tight ceiling voids and narrow passages between units, so the indoor unit must sit where no moisture or drainage spill reaches the neighbouring flat. Modern apartment design allows ductwork to run through false ceilings, but outlets must spread the cold air evenly so no single point disturbs residents. Sound travels easily between flats, so we choose quieter indoor units and fit acoustic dampers when needed.
Al Mawaddah sits in east Jeddah, a modern residential zone of mid-sized apartment blocks with tight ceilings and shared hallways.
Most Al Mawaddah flats have false ceilings that allow ductwork, and outdoor units are usually mounted on roofs or side balconies.
The AC setup in Al Mawaddah
- 1
Indoor unit in hallway or bathroom
Modern flats allow the indoor unit to be mounted in shared areas without eating into living space.
- 2
Ductwork through false ceiling
Most Al Mawaddah flats have false ceilings that allow ducts to run easily to every room without breaking into walls.
- 3
Outdoor unit on roof or side balcony
Outdoor units are mounted on safe roofs or side balconies away from front windows to preserve the view and keep noise away.
Before the visit
Before our visit in Al Mawaddah
- 1
Show us your flat layout or ceiling photos
Before we visit, send us photos of the hallway, bathroom and false ceiling if you have one, so our team can pinpoint the indoor unit location.
- 2
Confirm false ceiling access
If the false ceiling is secured with clips or has existing ducts, tell us beforehand to avoid trouble removing or rerouting panels.
- 3
Identify where the outdoor unit will sit
Agree with building management on the outdoor unit location and confirm the roof or balcony is safe and there is a power line nearby or a dedicated circuit ready.
More districts for Apartment central AC
Other services in Al Mawaddah
FAQ
Questions about Apartment central AC
Is there enough ceiling space in a flat for a central unit?
It varies between flats. Slim ceiling cassettes need less void depth than full ducted units. A site survey measures what is available and decides the right type; if the corridor ceiling is too shallow we look at a storage room or bathroom ceiling instead.
Is one unit enough for the whole flat or do I need more?
It depends on the flat's area, room layout and how much sun each side receives. Two- and three-bedroom flats can sometimes work with one unit and well-planned ducts; larger flats or those with separate zones may need two. The survey decides.
Where does the outdoor unit go when the flat has no large balcony?
Options include the shared roof if the building rules allow it, a facade bracket away from neighbours' windows, or the balcony if it can take the load. We review the building's rules before recommending any position.
Jeddah's air is very humid; does that affect the condensate drain?
Yes. In Jeddah the indoor unit produces more condensate because of the high humidity. We make sure the drain line has enough fall, that the horizontal run before it drops is not too long, and that the outlet does not conflict with other flats' drainage in the building.
Can the flat be split into two zones with different temperatures?
It is possible using two separate indoor units or by adding variable-flow dampers on the duct runs. The right choice depends on the flat's layout and the ceiling void available in each zone. A site survey decides which approach suits your room arrangement.
How do you fit the indoor unit in my tight flat?
We assess your ceiling layout first and pick a spot in the hallway or bathroom where it takes no living space and the drain runs safely away from neighbouring units.
I worry water will drip into my neighbour's flat below, how do you prevent that?
We run the condensate through the false ceiling toward the building's external drainage, and confirm the route is shielded and safe before we switch on.
Will the central AC noise disturb my neighbours?
We select low-noise indoor units and fit sound-damping supports, especially if the false ceiling is thin or the hallway is shared between flats.
The building's electrical capacity is limited, can central AC handle sudden start-up?
We check your distribution panel before installation and confirm a dedicated circuit with enough capacity for both indoor and outdoor units together.












































































