Duct cleaning & sanitising in Al Salihiyah

The filter catches dust before it enters the duct, but over the years fine particles slip through and stick to duct walls. If the filter is clean but the smell or allergy symptoms continue, the problem is likely deeper inside. A camera inspection shows the actual condition of the duct and settles the question.

Yes. The humid salty air from the sea enters through return-air openings carrying water vapour that condenses on the cool duct walls. This creates conditions where mould and bacteria grow, especially in sections far from the unit where airflow is weaker. Sanitising after cleaning inhibits that growth.

In most cases yes. We pass the camera and cleaning tools through existing grilles and access points. If a section is too long or narrow for the tools to reach, we may need to cut an access door, and we explain that at the inspection before starting; any opening cut is resealed when the work is done.

Most people notice the smell drops from the first run, and less dust settles on surfaces. Respiratory and allergy symptoms often ease gradually because the duct is no longer pushing irritant particles into the room. Airflow can also improve if deposits were partly blocking the cross-section.

Yes. If the camera shows that buildup is concentrated in a specific section, such as a duct near a return-air opening or an external passage, that section can be isolated and cleaned on its own. The inspector defines the logical work boundaries at the first visit so sections that need no work are not touched and sections that do are not missed.

Yes, shared ducts in apartment blocks need regular cleaning, but you must coordinate with building management to access the plant room or roof.

Our team carries inspection and cleaning equipment by hand when needed, so we do not require a large vehicle to enter the flat or villa.

Yes, eastern humidity speeds up mould and bacterial build-up in ducts, so we recommend annual cleaning or more frequent intervals based on use.

We inspect ducts using a small camera from existing access points, and clean with powerful vacuums and specialised brushes without cutting or modifying the duct itself.