Dedicated duct workshop
Duct fabrication in Al Nur
In Al Nur, north Jeddah, modern residential buildings and hotels need reliable central ductwork that distributes air precisely. Alrabih fabricates duct in the workshop to exact dimensions with complex fittings, so it arrives on site ready to hang with no air loss.
- G90 sheet
- Site dimensions
- Complex fittings
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
Who needs workshop-fabricated duct?
- 1
A contractor with project-specific sizes
Your project has non-standard sizes or volumes too large for site cutting. We fabricate rectangular and round sections from your drawings at exact dimensions, labelled and ready to hang when they reach the site.
- 2
Fittings too awkward to cut on site
Elbows, transitions, offsets and takeoffs come out distorted when cut by hand on site, leaking air and creating noise in the line. We make them in the workshop at the right dimensions with tight seams.
- 3
Extending or renovating an existing duct network
You need new branches, a damaged section replaced or a fitting that matches an old duct size. We measure the existing network on site and fabricate the pieces to match what is already there.
Who it's for
Building a facility that needs non-standard duct sizes
We read your project drawings and fabricate all sections and fittings at exact dimensions from G90 or aluminium sheet, labelled and ready to hang the moment they reach your site.
Ask on WhatsAppRenovating home AC and need fittings to match old duct
We measure the existing ductwork in your home and fabricate the branches, transitions and elbows needed to match the original duct without replacing the whole network.
Ask on WhatsApp
What the fabrication covers
- Site measure or drawings
- G90 or aluminium duct
- Elbows transitions and takeoffs
- Tight seams to SMACNA
- Labelled sections ready to hang
How we work
How we work
- 1
Take measurements
A technician visits the site or you send us the drawings; we list every duct section needed, its size and the correct sheet thickness for that section.
- 2
Fabricate sections and fittings
We cut, form and lock the sheet in the workshop, including all elbows, transitions, offsets and takeoffs, and each section comes out at its exact dimension.
- 3
Label and prepare for delivery
We number every section and fitting against the assembly plan so the installation crew knows exactly where each piece goes, with no guessing on site.
- 4
Deliver to site
We deliver the duct to your Jeddah site protected and ready to hang. If you need an installation crew, we can arrange that as a separate step.
Workshop fabrication or site cutting?
| Alrabih | The usual way | |
|---|---|---|
| Dimensional accuracy | Workshop machines, tight dims | Hand variation on site |
| Complex fittings | Correct elbows and transitions | Distorted, leaking air |
| Seam quality | Tight lock, low leakage | Gaps weaken pressure |
| Site schedule | Arrives ready to hang | Extra time and site noise |
| Salt and humidity | Aluminium where site demands | One sheet regardless |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Al Nur is a relatively modern urban district with spacious villas, residential towers and hotels featuring advanced architectural designs, all requiring complex central AC systems that span multiple floors and wide areas. These buildings need workshop-fabricated duct with precise measurements, curves, transitions and custom takeoffs, because cutting on site cannot maintain the accuracy needed for balanced pressure and high efficiency.
Al Nur sits in north Jeddah, a modern urban district mixing spacious villas, residential towers and hotels.
Central AC systems here require ductwork running across roofs and inside tower walls, with many curves and transitions.
The AC setup in Al Nur
- 1
Complex central ductwork for towers
Hotels and residential towers need branching duct systems with transitions, curves and takeoffs distributed across multiple floors.
- 2
Flexible ducts for tight wall cavities
Some modern villas and flats use insulated flexible duct for constrained spaces between structural elements.
- 3
Rectangular and round duct with precise curves
Most systems here mix rectangular duct for main runs with round duct for branches, both with carefully calculated curves and transitions.
Before the visit
Before our visit in Al Nur
- 1
Obtain the engineering drawings or site measurements
Send us the engineer's drawings or exact measurements of the duct routes before we begin fabrication.
- 2
Confirm the installation team can access roofs and interior passages
Ensure the building's roofs, lifts and interior passages will be available for the installation team on the scheduled date.
- 3
Set a receiving point for duct delivery and installation
Agree with building management on a safe unloading point for the duct and installation start times to avoid clashes with other work.
More districts for Duct fabrication
Other services in Al Nur
FAQ
Questions about Duct fabrication
Can you fabricate from drawings without visiting the site?
Yes, when the drawings are clear and carry the actual as-built dimensions. If a dimension is uncertain or a field change has been made, we prefer a site visit to avoid a fabricated piece that does not fit. We discuss the better approach with you before starting work.
What is the difference between galvanized and aluminium sheet for duct?
G90 galvanized sheet is the standard choice for interior duct: strong and suited to a range of pressures. Aluminium is lighter and handles Jeddah's coastal humidity and salt air better, making it right for some exposed applications or where structural load is a limiting factor. The correct choice depends on the site.
Can you make elbows and transitions to match an existing duct network?
Yes. We measure the existing network on site to match sizes precisely, whether you need a new branch added, a damaged fitting replaced or an extension tied into the original ductwork. The right approach is confirmed after the site visit.
How do you choose sheet thickness for each section?
Thickness follows section size: a large duct needs heavier sheet to hold its shape under pressure, a small one can use lighter material. We apply the SMACNA requirements to each section in the project individually, not a single thickness across the whole job.
Does Jeddah's humidity and salt air affect which sheet material to use?
Yes, particularly for sections exposed to outdoor air or installed near fresh-air intakes. G90 galvanized sheet performs well inside the building, but aluminium is the better choice where duct is in continuous contact with Jeddah's humid, salt-laden air. The site survey determines the right material for each section.
Why fabricate duct in the workshop rather than cut on site?
On-site cutting loses precision and causes air leakage, especially in complex systems. Workshop-fabricated duct arrives with exact dimensions and intricate details so it fits with no pressure loss.
How do you deliver duct to tall residential towers?
We fabricate duct sized to fit the towers' lifts and interior passages, and deliver it flat-packed or rolled for easy transport to upper floors.
Does the duct withstand the intense heat on the roof?
We use rust-treated G90 galvanised or aluminium suitable for heat exposure. Duct on exposed roofs needs additional thermal insulation depending on run length and sun exposure.
Do you work from the building's engineer drawings?
Yes, we read the engineer's drawings and fabricate to spec. We also take additional on-site measurements to confirm accuracy before fabrication.
