Back-of-house refrigeration
Commercial fridge service in Al Fanar
In Al Fanar, far northern Jeddah, commercial fridges in shops and restaurants operate in a hot coastal zone where salt and humidity speed corrosion and rust. We diagnose cooling loss and repair condensers, gaskets and drains.
- Clean condenser
- Tight gaskets
- Stable cooling
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
When your commercial fridge needs attention
- 1
Temperature creeping up slowly
The fridge runs but no longer reaches its old temperature. In Jeddah's hot kitchens, grease builds on the condenser quickly, robbing it of the ability to shed heat and straining the compressor. We check the blockage on site and decide what is needed.
- 2
Condenser fan stopped or slowed
The condenser fan draws air across the condensing coil. When it stops or slows, heat rises fast and the compressor cuts out on its thermal protector. We test the motor and the run capacitor and replace what has failed as part of the repair.
- 3
Door gasket not sealing properly
A cracked or burned gasket lets warm, humid kitchen air in constantly. The result is a compressor that never rests, condensation forming inside the cabinet and an unstable temperature. We measure the existing gasket and replace it with the right size for that door.
Who it's for
Running a restaurant with fridges that keep breaking down
We inspect every back-of-house fridge, from uprights to prep counters, find the cause of repeated faults and fix each one so your kitchen keeps running.
Ask on WhatsAppOwn a grocery and your stock fridge is not cold enough
We find the cause of the weak cooling on site, whether a blocked condenser or a worn gasket, and repair it so your stock is kept safely cold.
Ask on WhatsApp
What the service covers
- Condenser grease clean
- Fan motor and capacitor check
- Door gasket test and replacement
- Refrigerant pressure and compressor check
- Thermostat and temperature stability
How we work
How we work
- 1
Describe the fault
WhatsApp us the make, model and the fault you see, plus your district, so the technician arrives with the right tools and likely parts.
- 2
On-site diagnosis
We check the condenser, fan, gaskets and refrigerant pressure on site and identify the real cause before starting any repair.
- 3
Repair and clean
We clean the condenser of grease and dust, replace the faulty part and top up refrigerant if needed, all while keeping disruption to your work as short as possible.
- 4
Temperature check and handover
After the repair we let the fridge run and measure the cabinet temperature until it reaches the correct range, then hand the unit back to you.
A real fix or a short-term patch?
| Alrabih | The usual way | |
|---|---|---|
| Condenser | Fully degreased | Wiped or ignored |
| Fault diagnosis | Pressure and electrical check | Guesswork replacement |
| Door gasket | Measured and replaced properly | Taped as a stopgap |
| Final check | Cabinet temperature measured | Switched on and left |
| Recharge method | Leak found before recharge | Recharged without leak check |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Al Fanar is a far northern coastal zone near beaches and ports, mixing small food shops and restaurants with older workshops and warehouses of varying age. High coastal humidity and airborne salt cause early rust on the condenser and metal fan parts, and gaskets wear faster. Salt and humidity buildup on condenser coils sharply cuts efficiency, and drains clog quickly from combined grease and salt. Frequent maintenance is more critical here than in inland districts.
Al Fanar is a far northern coastal district with mixed commercial, workshop and old and modern residential blocks near the sea.
Commercial fridges in Al Fanar's restaurants and shops need intensive maintenance owing to salt and humidity corrosion, and their condensers rust faster than inland units.
The AC setup in Al Fanar
- 1
Shop display fridges with corroded metal frames
Shop and restaurant fridges in Al Fanar often show rust on the frame and condenser owing to high coastal salt and humidity.
- 2
Open condensers exposed to coastal air
Most condensers here are open with no protective covers, increasing exposure to salt, humidity and sea dust.
- 3
Older units with weak drain pipes
Several older Al Fanar fridges have damaged or chronically clogged drain pipes from salt and grease.
Before the visit
Before our visit in Al Fanar
- 1
Open the shop door or move the fridge from the wall
Al Fanar fridges often sit against outer walls exposed to salt and damp. Make sure the rear and sides of the condenser are freely accessible before the visit.
- 2
Locate water taps and drain points
Tell us where the nearest water tap and floor drain are so we can clean the condenser and drain lines effectively.
- 3
Protect items near water and moisture
If other items are near the fridge, move or cover them before the visit as condenser cleaning requires water spray and deep washing.
More districts for Commercial fridge service
Other services in Al Fanar
FAQ
Questions about Commercial fridge service
My kitchen fridge runs all the time but does not cool enough. What is wrong?
In most cases the condenser is blocked with grease and dust, which is common in Jeddah kitchens where steam and smoke build up fast. A worn door gasket letting warm kitchen air in constantly is another likely cause. We check both on site and tell you which is the problem, or whether both need attention.
Do you service prep counters and under-counter fridges as well?
Yes, our service covers upright fridges, prep counters, under-counter units and bottle coolers in restaurants, bakeries and groceries. We ask for the model in advance so the technician arrives with the right tools and parts for that unit's size and type.
How does Jeddah's humidity affect kitchen fridges?
Warm, humid air enters through any worn gasket and condenses inside the cabinet, raising the load on the compressor and speeding gasket wear. Salt in Jeddah's sea air also corrodes condenser parts over time. That is why we check gaskets and the condenser condition carefully at every service visit.
Can the fridge be repaired without shutting the kitchen down?
For most repairs, yes. Cleaning the condenser and replacing a fan motor or gasket takes the fridge out of service for a short time only. If the repair needs the refrigerant recovered and recharged we tell you the expected time beforehand so you can prepare your stock.
Why does water keep collecting inside my kitchen fridge?
The most common cause is a worn door gasket letting humid kitchen air in, which then condenses on the walls and shelves. A blocked defrost drain at the base of the unit is another frequent cause. We check the gaskets and the drain line on site and identify the problem before starting any repair.
My fridge is near the beach and salt corrodes the metal, how do I protect it?
Salt and humidity accelerate rust on the condenser and metal frame. We clean the condenser and exposed parts frequently and apply protective coating if needed, and advise weekly fan and connection checks.
My restaurant is near the port and the humidity is very high, does it damage the fridge?
Extreme humidity speeds mould and rust in the condenser, gaskets and drain. We inspect these areas deeply and clean them with disinfectants to prevent bacterial and mould growth.
My drain line clogs constantly, what does this mean?
Grease, salt and humidity combine to clog the drain line quickly in coastal areas. We deep-clean the drain and inspect the tube for cracks or permanent blockage.
The wiring and connections are rusty from salt, is that dangerous?
Yes, rust on wires and connections raises the risk of circuit failure and fire. We check connections and plugs carefully and advise immediate replacement of any corroded wire or worn connector.
