Hotel and hospitality HVAC
Hotel HVAC in Harat Al Yemen
In Harat Al Yemen, the heart of old Jeddah, heritage hotels and tourism facilities need AC that fits the old construction and respects the historic character. Alrabih designs smart multi-split systems with minimal-impact installation and regular maintenance that preserves the heritage architecture.
- Room quiet
- Individual control
- Non-disruptive maintenance
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
When a hotel needs a specialist
- 1
A new hotel or serviced apartments under construction
The right design starts before the ceilings are closed. We fix diffuser positions, duct routes and noise levels per room before finishing, so there is no costly breaking out or rerouting later.
- 2
Guests complaining about noise or smell
A loud fan coil, air whistling at a diffuser, or corridor smell entering the room when the door opens. These are diagnosable problems with a fix, after a site survey of the airflow.
- 3
Maintenance that disrupts hotel operations
A hotel never stops, and occupied rooms cannot accept a technician working through the night. We draw the maintenance plan with the hotel manager, using vacant rooms and quiet hours.
Who it's for
Opening a new hotel before fit-out is finished
We enter at the structural stage to fix duct routes and unit positions for every room before ceilings close, so you avoid costly changes later.
Ask on WhatsAppRunning an open hotel with ongoing guest complaints
We diagnose noise, odour and control faults in problem rooms and carry out repairs in vacant rooms without affecting staying guests.
Ask on WhatsApp
What the work covers
- Design for rooms and areas
- Supply and installation of units
- Ductwork to SMACNA standards
- Fresh air and odour control
- Preventive and corrective maintenance contracts
How we work
How we work
- 1
Survey and design
We visit the site, study the drawings and expected occupancy, and decide the right system type for each zone: rooms, lobby, halls and corridors.
- 2
Fabrication and supply
We fabricate ducts in our own workshop from G90 galvanised sheet to the site dimensions, and supply units from our authorised brands to the specifications the design sets.
- 3
Installation and sealing
We install units and ducts and test room noise levels before the ceilings close, using Armaflex and Kimmco insulation and Foster sealants to control condensation and air leakage.
- 4
Handover and maintenance plan
We commission the full system, verify individual control in every room, and hand hotel management a scheduled maintenance plan built around occupancy so guests are not disturbed.
Specialist hotel design or a generic fit-out?
| Alrabih | The usual way | |
|---|---|---|
| Room noise | Measured and set before close-up | Found after opening |
| Guest control | Independent per room | One zone per floor |
| Corridor odour | Planned fresh-air supply | Enters guest rooms |
| Maintenance | Scheduled with hotel management | When a technician is free |
| Corridor air quality | Calculated pressure stops infiltration | Relies on opening windows |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Harat Al Yemen is part of the old city with tall historic buildings in heritage architecture and tightly winding streets. AC systems here need special care because any modification to facades or walls affects the building's heritage value, and installation must be minimal and pipes hidden where possible. Guests expect an authentic experience, so quiet comfort is essential without the AC looking obtrusive.
Harat Al Yemen is in Jeddah's historic downtown, a district of narrow heritage buildings and winding streets around historic markets.
Heritage hotels in Harat Al Yemen use individual split units per room or section, with outdoor units carefully mounted on narrow facades or available side gaps.
The AC setup in Harat Al Yemen
- 1
Hidden split units blending with historic décor
Indoor units are placed to look like part of the furnishings or traditional walls, not an alien box in a historic room.
- 2
Pipes hidden in walls and heritage spaces
Copper lines run through walls or behind existing wooden panels, preserving the building's original look.
- 3
Outdoor units in side gaps and rear roofs
Outdoor units go in the narrow side gaps between buildings, rear roofs, or interior courtyards to avoid the historic front facades.
Before the visit
Before our visit in Harat Al Yemen
- 1
Get heritage preservation approval first
Check whether the building requires approval from heritage preservation authorities before any modification or installation.
- 2
Survey building layout and tight space boundaries
Scout the building before the visit to identify the best spots for outdoor and indoor units without damaging the facades.
- 3
Coordinate with hotel management and occupants on work schedule
Agree on an installation schedule that fits the hotel's hours and guests, and try to minimize noise and disruption.
More districts for Hotel HVAC
Other services in Harat Al Yemen
FAQ
Questions about Hotel HVAC
What unit type suits hotel guest rooms in Jeddah?
It depends on the building layout, number of floors and running-cost priorities. Fan coil units on a chilled-water system are common in larger hotels; serviced apartments often suit split or cassette units. The survey decides what fits, and both options are available through our authorised brands: Carrier, YORK, General, Midea, Gree and Smart Gold.
How do you handle Jeddah's humidity in corridors and shared areas?
Indoor corridors face humid outside air every time a door opens. We calculate the fresh-air volume for each zone and check that internal pressure stops warm, humid outside air from infiltrating. Ducts are insulated with Kimmco and Armaflex materials to stop condensation forming on the outside of the duct.
Can you service one room without cutting air conditioning to the rest of the floor?
In most systems designed for hotels, yes. Each unit or circuit serves a limited set of rooms and can be isolated on its own. We build this zoning into the design specifically so that neighbouring rooms stay live during any maintenance work, and the zoning is confirmed at the design stage before installation.
Do you work in the hotel while it is open to guests?
Yes, and we are familiar with coordinating around hotel operations. We agree in advance which rooms are set aside for maintenance, and we work at hours that avoid guest peak times. Any task that produces noise is reviewed with the hotel manager before it is scheduled.
How do you maintain stable room temperature when guests change and doors open frequently?
Frequent door opening upsets the pressure balance in a guest room and lets warm, humid corridor air in. We size each unit to the actual room dimensions, not the building as a whole, and balance the fresh-air supply against the return air for each room. A site survey determines the layout of individual controls and the dampers needed to isolate each room from corridor pressure changes.
The building is historic and we may not be able to modify facades, how do you install AC?
We study the building carefully first and choose installation spots that preserve its historic character, such as side gaps, rear roofs, or interior courtyards where available.
The streets are extremely narrow, how do you bring in equipment and heavy units?
Our team carries tools and units by hand through tight passages, and we disassemble large packages if needed to avoid damaging historic facades and walls.
Guests want an authentic historic experience, can we hide the AC?
Yes, we mount indoor units to look hidden or blend with the historic décor, and run pipes inside walls or behind traditional wooden panels.
Old-building humidity and coastal proximity increase mould, does your cleaning help?
Yes, regular cleaning of coils and filters is essential in this old humid environment, and we monitor the drain pan closely to prevent mould and moisture buildup.
