Cooling fit for a mosque

Mosque HVAC in Al Andalus

Mosque HVAC in Al Andalus, west Jeddah, balances open spaces with inner courtyards. Alrabih designs cooling systems that adapt to both traditional and modern architecture, focusing on thermal comfort and quiet operation.

Call nowWhatsApp
  • Even distribution
  • Quiet units
  • Scheduled servicing

Clients We're Proud to Serve

Organisations and companies that trusted Alrabih with their projects.

  • Saudi Aramco
  • Ministry of Energy
  • Royal Saudi Land Forces
  • Royal Saudi Naval Forces
  • Al Baik
  • Centro Hotels by Rotana
  • King Abdullah Economic City
  • First Mills
  • Juffali
  • eXtra
  • Dr. Soliman Fakeeh Medical Center
  • Alesayi Motors
  • Abu Zaid
  • Water Desalination
  • Attieh Steel
  • SSCO
  • Creet
  • Emad Rizq
  • Alfaneyah
  • Rawat Alam Al Tasmeem
  • IBI Magix Arabia — Construction Services
  • Midtown for Construction
  • Petra Engineering Industries Co.
  • Hyrmas
  • Batterjee Medical College
  • Advanced Horizons Contracting Company
  • D.Metals
  • Benchbox — Masters of Space
  • Sadafco
  • Umm Al-Qura University
  • Saudi Arabian Drug Store (SADS)
  • Foamco
  • Ahmad A. R. Bin Afif Industries Co. (Sandwich Panel Factory)
  • Namariq
  • ALS

When a mosque needs a specialist approach

  1. 1

    Heat reaching the back rows

    Cold air pools near the units and never reaches the back of the hall. In Jeddah's humidity, worshippers in the far rows feel the heat even with the system running. That is a design problem, not a unit fault.

  2. 2

    Noise that disturbs prayer

    Unit noise in a quiet hall distracts worshippers and breaks concentration. The right unit type, its position and the air velocity setting all reduce noise to the lowest possible level, and those choices are made at the survey.

  3. 3

    A dome or high ceiling that traps heat

    Hot air rises and collects under the dome, so the breathing level stays warm even with large units running. We set diffuser angles and air paths at the survey to push that hot layer out rather than cool over the top of it.

Who it's for

  • Building a new mosque that needs AC from the start

    We join the design stage to fix duct routes and unit positions before ceilings are closed, so the installation is clean and efficient with no remedial work needed later.

    Ask on WhatsApp

  • Your existing mosque cools unevenly across the rows

    We survey the existing system, find the cause of uneven distribution and propose changes to the airflow paths or units without disrupting the mosque.

    Ask on WhatsApp

What the work covers

  • Hall survey and airflow mapping
  • Ductwork to SMACNA standard
  • Units fitted at surveyed positions
  • Airflow check across the rows
  • Contracts scheduled between prayers
Request a quote

How we work

How we work

  1. 1

    Mosque survey

    We visit the mosque outside prayer times to measure the hall, ceiling height and dome, and agree diffuser positions, duct routes and unit locations before any work begins.

  2. 2

    Design and fabrication

    We design the system from the survey data and fabricate the ducts in our own workshop from G90 galvanised sheet, then prepare them for installation.

  3. 3

    Installation at agreed times

    We coordinate with mosque management to work between prayers or at times that do not interrupt activities, and we leave the hall clean at the end of each working day.

  4. 4

    Testing and handover

    We run the system and measure air distribution at the front and back rows and sound levels, adjusting the balance until comfort is even across the whole hall.

Designed for a mosque or units placed at random?

AlrabihThe usual way
Air distributionEven across every rowCold front, hot back
SoundAssessed at surveyNot considered
Dome and high ceilingPlanned airflow pathsHot layer left above
MaintenanceScheduled between prayersVisits that disrupt use
Startup schedulingProgrammed before each prayerManual, inconsistent start

Everything your AC needs, from one team

From system design and duct fabrication to installation, commissioning and maintenance.

Some of our work

Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.

  • Galvanized rectangular duct trunk with branch takeoffs and round diffusers, hung from a black ceiling, a Carrier unit visible behind — interior finishing stage.
  • Round diffusers and a spiral duct trunk in a tiled stairwell service shaft.
  • Rooftop ductwork and an exhaust fan, with Jeddah buildings in the background.
  • Rooftop packaged AC units with rectangular duct transitions, city buildings behind.
  • Insulated rooftop duct run beside a packaged unit, a warehouse roof in the background.
  • A grid of round diffusers in an open-plan office ceiling, mid-construction.
  • An insulated rooftop duct elbow, against a mountainous backdrop.
  • Large insulated ductwork running along a factory ceiling, with workers visible below.
  • A yellow round diffuser mid-installation, with spiral duct and a suspended ceiling grid.
  • Duct insulation wrap in progress on a construction site, bare duct still exposed.
  • A black-painted duct trunk with round diffusers and track lighting, in a finished retail interior.
  • An indoor AHU unit connected to round ductwork in a mechanical plant room, exposed concrete ceiling.
Similar project? Send us the details

Customer reviews

What our customers say

4.8

From 10 Google reviews

  • Muhammadramzan 2641

    “MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”

  • shahzeb armani

    “Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”

  • Tawfik AlyawerLocal Guide

    “U can find all u need for air conditioning”

Read every review on Google

Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.

Worked with us? Leave a review

Service areas

We come to you anywhere in Jeddah

From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.

Map of Jeddah by sector, with Alrabih's base in Al Aziziyah
Don't see your district?Message us. We most likely cover it.

What sets this district apart

Al Andalus, west Jeddah, mixes modern high-rise buildings with older heritage structures, so mosques vary architecturally from modern prayer halls with high ceilings to traditional inner courtyards. Heat is high in the west but natural ventilation from inner courtyards reduces the thermal load slightly. Design must allow cold air to enter from outside into the courtyard and then to the prayer hall, minimizing cooling loss whilst keeping noise low.

Al Andalus lies in west Jeddah, a mixed district of modern buildings and heritage structures with architecturally varied mosques.

Al Andalus mosques are architecturally diverse, some with open high ceilings and others with traditional inner courtyards, each requiring different cooling approaches.

The AC setup in Al Andalus

  1. 1

    Cooling system adapted to inner courtyards

    We design air distribution to leverage traditional inner courtyards for improved natural ventilation and reduced thermal load.

  2. 2

    High-capacity central unit for spacious halls

    Most Al Andalus mosques need a high-capacity central unit to cover spacious halls and high ceilings.

  3. 3

    Balanced distribution from multiple vents

    Vents are evenly spaced above prayer rows and around the courtyard, ensuring balanced cold distribution.

Before the visit

Before our visit in Al Andalus

  1. 1

    Survey inner courtyards and existing openings

    We need to see inner courtyards and existing openings to understand how natural ventilation affects cooling distribution.

  2. 2

    Assess structure to support heavy central unit

    We inspect ceilings and available ledges to confirm they can support the heavy central unit and ducts.

  3. 3

    Coordinate on preserving traditional architecture

    We agree with mosque management on duct and vent routing that minimises impact on the mosque's original architectural character.

More districts for Mosque HVAC

Other services in Al Andalus

FAQ

Questions about Mosque HVAC

How do you make sure the far rows get enough cooling?

At the survey we set diffuser angles, air velocity and duct routing so cold air travels to the last row. After installation we measure the temperature difference between the front and back rows and adjust each diffuser's balance until that difference is as small as the space allows.

Can you work in a functioning mosque without disrupting prayers?

Yes. We agree a phased schedule with mosque management in advance and divide the work into sessions between prayers. Before each call to prayer we lift tools, cover any temporary openings and return the hall to a usable state, then resume afterwards.

What type of ductwork do you use in prayer halls?

We fabricate ducts in our own workshop from G90 galvanised sheet, round or rectangular as the design requires. We use Armaflex and Kimmco insulation and Foster sealants to limit heat gain and keep sound transmission through the ductwork as low as possible.

Can the system be set to start just before each prayer time?

Yes. The controls on Carrier, YORK, General, Midea, Gree and Smart Gold units support scheduled start and stop times. At the survey we confirm the scheduling options for the chosen units and programme the timings at handover, so the hall is already cool when worshippers arrive.

Can we cool only part of the hall when fewer people attend?

Yes, if the system is designed in zones. We divide the hall into sections, each with its own unit or closable outlets, so you run the front rows alone when few people attend and the whole hall for Friday prayer and occasions, cutting power use without affecting worshippers.

Our mosque has a traditional inner courtyard; how do you integrate AC with this design?

We design cold air distribution to pass through the courtyard before entering the prayer hall, improving thermal comfort whilst preserving the original architectural character.

Al Andalus is very hot; does the AC efficiently cool large prayer halls?

We choose high-capacity cooling units and arrange distribution so cold air reaches every corner of large halls, without annoying draughts.

Can we reduce power consumption whilst keeping the cooling adequate?

We choose high-efficiency units and take advantage of natural ventilation from courtyards and openings, reducing AC load during cooler daytime hours.

The hall is very wide with a high ceiling; how do you control noise?

We choose low-noise fans at low and medium speeds, line ducts with sound-absorbing materials, keeping noise below comfortable levels during prayer.

The Jeddah corniche in cool weather

Prepare your mosque for comfortable prayer

Send us a photo of the hall or dome on WhatsApp or call us, and we will arrange a survey at a time that suits the mosque, Saturday to Thursday.

Call nowWhatsApp
CallWhatsApp