Cooling fit for a mosque

Mosque HVAC in Al Rehab

In Al Rehab, central Jeddah, mosques operate amid dense residential and commercial buildings in an urban environment. Alrabih designs a system that runs efficiently without disturbing the surrounding area and manages electrical load on city power networks.

Call nowWhatsApp
  • Even distribution
  • Quiet units
  • Scheduled servicing

Clients We're Proud to Serve

Organisations and companies that trusted Alrabih with their projects.

  • Saudi Aramco
  • Ministry of Energy
  • Royal Saudi Land Forces
  • Royal Saudi Naval Forces
  • Al Baik
  • Centro Hotels by Rotana
  • King Abdullah Economic City
  • First Mills
  • Juffali
  • eXtra
  • Dr. Soliman Fakeeh Medical Center
  • Alesayi Motors
  • Abu Zaid
  • Water Desalination
  • Attieh Steel
  • SSCO
  • Creet
  • Emad Rizq
  • Alfaneyah
  • Rawat Alam Al Tasmeem
  • IBI Magix Arabia — Construction Services
  • Midtown for Construction
  • Petra Engineering Industries Co.
  • Hyrmas
  • Batterjee Medical College
  • Advanced Horizons Contracting Company
  • D.Metals
  • Benchbox — Masters of Space
  • Sadafco
  • Umm Al-Qura University
  • Saudi Arabian Drug Store (SADS)
  • Foamco
  • Ahmad A. R. Bin Afif Industries Co. (Sandwich Panel Factory)
  • Namariq
  • ALS

When a mosque needs a specialist approach

  1. 1

    Heat reaching the back rows

    Cold air pools near the units and never reaches the back of the hall. In Jeddah's humidity, worshippers in the far rows feel the heat even with the system running. That is a design problem, not a unit fault.

  2. 2

    Noise that disturbs prayer

    Unit noise in a quiet hall distracts worshippers and breaks concentration. The right unit type, its position and the air velocity setting all reduce noise to the lowest possible level, and those choices are made at the survey.

  3. 3

    A dome or high ceiling that traps heat

    Hot air rises and collects under the dome, so the breathing level stays warm even with large units running. We set diffuser angles and air paths at the survey to push that hot layer out rather than cool over the top of it.

Who it's for

  • Building a new mosque that needs AC from the start

    We join the design stage to fix duct routes and unit positions before ceilings are closed, so the installation is clean and efficient with no remedial work needed later.

    Ask on WhatsApp

  • Your existing mosque cools unevenly across the rows

    We survey the existing system, find the cause of uneven distribution and propose changes to the airflow paths or units without disrupting the mosque.

    Ask on WhatsApp

What the work covers

  • Hall survey and airflow mapping
  • Ductwork to SMACNA standard
  • Units fitted at surveyed positions
  • Airflow check across the rows
  • Contracts scheduled between prayers
Request a quote

How we work

How we work

  1. 1

    Mosque survey

    We visit the mosque outside prayer times to measure the hall, ceiling height and dome, and agree diffuser positions, duct routes and unit locations before any work begins.

  2. 2

    Design and fabrication

    We design the system from the survey data and fabricate the ducts in our own workshop from G90 galvanised sheet, then prepare them for installation.

  3. 3

    Installation at agreed times

    We coordinate with mosque management to work between prayers or at times that do not interrupt activities, and we leave the hall clean at the end of each working day.

  4. 4

    Testing and handover

    We run the system and measure air distribution at the front and back rows and sound levels, adjusting the balance until comfort is even across the whole hall.

Designed for a mosque or units placed at random?

AlrabihThe usual way
Air distributionEven across every rowCold front, hot back
SoundAssessed at surveyNot considered
Dome and high ceilingPlanned airflow pathsHot layer left above
MaintenanceScheduled between prayersVisits that disrupt use
Startup schedulingProgrammed before each prayerManual, inconsistent start

Everything your AC needs, from one team

From system design and duct fabrication to installation, commissioning and maintenance.

Some of our work

Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.

  • Galvanized rectangular duct trunk with branch takeoffs and round diffusers, hung from a black ceiling, a Carrier unit visible behind — interior finishing stage.
  • Round diffusers and a spiral duct trunk in a tiled stairwell service shaft.
  • Rooftop ductwork and an exhaust fan, with Jeddah buildings in the background.
  • Rooftop packaged AC units with rectangular duct transitions, city buildings behind.
  • Insulated rooftop duct run beside a packaged unit, a warehouse roof in the background.
  • A grid of round diffusers in an open-plan office ceiling, mid-construction.
  • An insulated rooftop duct elbow, against a mountainous backdrop.
  • Large insulated ductwork running along a factory ceiling, with workers visible below.
  • A yellow round diffuser mid-installation, with spiral duct and a suspended ceiling grid.
  • Duct insulation wrap in progress on a construction site, bare duct still exposed.
  • A black-painted duct trunk with round diffusers and track lighting, in a finished retail interior.
  • An indoor AHU unit connected to round ductwork in a mechanical plant room, exposed concrete ceiling.
Similar project? Send us the details

Customer reviews

What our customers say

4.8

From 10 Google reviews

  • Muhammadramzan 2641

    “MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”

  • shahzeb armani

    “Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”

  • Tawfik AlyawerLocal Guide

    “U can find all u need for air conditioning”

Read every review on Google

Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.

Worked with us? Leave a review

Service areas

We come to you anywhere in Jeddah

From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.

Map of Jeddah by sector, with Alrabih's base in Al Aziziyah
Don't see your district?Message us. We most likely cover it.

What sets this district apart

Al Rehab is a densely populated central zone with tightly packed residential and commercial buildings and relatively narrow streets, and mosques are woven into the urban fabric. This means noise and heat from outdoor units may affect neighbouring residents and shops. Electrical load is also limited on some older streets, so unit selection must account for energy efficiency and operation within available circuit capacity. Roof space for large outdoor units is also constrained.

Al Rehab sits in central Jeddah, a densely built urban zone of closely spaced residential and commercial buildings.

Most Al Rehab mosques use AC units of limited capacity with high sound-insulation standards to minimise noise in the neighbourhood.

The AC setup in Al Rehab

  1. 1

    Limited-capacity, high-efficiency units

    Choosing smaller high-efficiency units reduces electrical load and suits the dense urban setting.

  2. 2

    Short ducts with limited-range distribution

    Distribution ducts are short and close to avoid pressure loss and save energy in limited spaces.

  3. 3

    Compact outdoor units with high sound insulation

    Compact units with sound-insulating shrouds reduce impact on neighbouring residents.

Before the visit

Before our visit in Al Rehab

  1. 1

    Confirm agreement from neighbouring residents

    Inform nearby residents about the project in advance and secure their agreement to avoid later objections.

  2. 2

    Inspect main electrical line and breaker

    Check main breaker capacity and whether it can handle the new unit's load.

  3. 3

    Identify best outdoor location without facade damage

    Survey side and rear walls and the roof first before considering the front facade.

More districts for Mosque HVAC

Other services in Al Rehab

FAQ

Questions about Mosque HVAC

How do you make sure the far rows get enough cooling?

At the survey we set diffuser angles, air velocity and duct routing so cold air travels to the last row. After installation we measure the temperature difference between the front and back rows and adjust each diffuser's balance until that difference is as small as the space allows.

Can you work in a functioning mosque without disrupting prayers?

Yes. We agree a phased schedule with mosque management in advance and divide the work into sessions between prayers. Before each call to prayer we lift tools, cover any temporary openings and return the hall to a usable state, then resume afterwards.

What type of ductwork do you use in prayer halls?

We fabricate ducts in our own workshop from G90 galvanised sheet, round or rectangular as the design requires. We use Armaflex and Kimmco insulation and Foster sealants to limit heat gain and keep sound transmission through the ductwork as low as possible.

Can the system be set to start just before each prayer time?

Yes. The controls on Carrier, YORK, General, Midea, Gree and Smart Gold units support scheduled start and stop times. At the survey we confirm the scheduling options for the chosen units and programme the timings at handover, so the hall is already cool when worshippers arrive.

Can we cool only part of the hall when fewer people attend?

Yes, if the system is designed in zones. We divide the hall into sections, each with its own unit or closable outlets, so you run the front rows alone when few people attend and the whole hall for Friday prayer and occasions, cutting power use without affecting worshippers.

The neighbourhood is dense and flats are very close to the mosque, how do you handle noise and hot air?

We choose low-noise units, install outdoor units on sound-isolating brackets, and direct discharge vents away from neighbouring windows.

The building's wiring is old, can you install modern AC without electrical problems?

We assess the current circuit and choose high-efficiency units with low operating current, and may recommend line reinforcement if needed.

Roof space is very tight, where do we mount the outdoor unit?

We may mount the unit on a side wall or roof corner, or use a suspended bracket on the edge, depending on what the existing structure allows.

Can the outdoor unit be mounted without spoiling the mosque's street facade?

We prefer side or rear walls if possible, and if the front is necessary we use architectural brackets that blend with the building.

The Jeddah corniche in cool weather

Prepare your mosque for comfortable prayer

Send us a photo of the hall or dome on WhatsApp or call us, and we will arrange a survey at a time that suits the mosque, Saturday to Thursday.

Call nowWhatsApp
CallWhatsApp