Window unit fitted right
Window AC installation in Al Asalah
Window AC installation in Al Asalah requires precision in sealing the openings, because the hot, salty, dusty air sweeping down from the north finds its way through any small gap. Alrabih's team ensures a tight fit with the correct outward tilt so condensate drains away from your interior walls.
- Firm frame
- Sealed gaps
- Outward drain
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
When a window unit is the right choice
- 1
A room with no outdoor unit space
Some rooms have no wall facing a suitable space for an outdoor unit. A window AC is the practical answer: one unit in the opening cools the room and expels heat directly outside.
- 2
An annex, staff housing or storeroom
Annexes, staff rooms and warehouses need real cooling without the cost of long copper and cable runs. A window unit suits these spaces well when the right opening exists or can be made.
- 3
An existing window of the right size
When a wall already has a window opening that matches the unit you have chosen, the frame fits straight in without cutting new concrete. We confirm at the survey that the opening suits the unit and the wall carries the load.
Who it's for
Need to cool a maid's room or home annex
We survey the opening or proposed wall in the annex, fit the unit in a secure frame and seal every gap so no hot humid air enters the space.
Ask on WhatsAppManaging a staff housing building that needs practical cooling
We survey each room and its existing openings, then install units in level frames with the correct outward tilt in every room as the survey findings direct.
Ask on WhatsApp
What the installation covers
- Opening and wall check
- Frame levelled and secured
- Gaps sealed with insulation
- Drainage tilt adjusted
- Unit started and tested
How we work
How we work
- 1
Send a photo
WhatsApp us a photo of the opening or the proposed wall and your district, so the technician arrives with the right frame and fixings.
- 2
Site survey
On site the technician measures the opening, checks the wall, confirms there is a suitable power point near the unit, and agrees with you on any changes needed before starting.
- 3
Fit and seal
We fit the frame level, set the unit with the correct outward tilt, then seal every gap around the frame so no hot air, dust or humidity enters.
- 4
Start-up and handover
We run the unit, check the cooling and confirm condensate flows outward, then leave the space clean and show you how to clean the filter.
Proper installation or just placing the unit?
| Alrabih | The usual way | |
|---|---|---|
| Frame | Level and firmly secured | Propped without fixing |
| Gaps | Sealed with insulating materials | Open or thin plastic |
| Tilt | Outward fall drains water | Level or tilted inward |
| Power | Dedicated nearby socket | Extension from another room |
| Site cleanliness | Space left clean | Dust and debris left behind |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Al Asalah is a relatively modern residential district with detached villas and mid-rise apartment blocks spaced more openly than older areas, and its streets are wider and more spacious. Most flats and villas here have standard window openings and sturdy outer walls that can bear a window unit's weight, but tight sealing is crucial because the dry northern winds carry salt and dust that creep rapidly through any loose gaps.
Al Asalah lies in north Jeddah and features contemporary residential buildings with a mix of detached villas and varied mid-rise blocks.
Most windows here are ready for direct window unit installation thanks to modern building standards, and condensate drainage typically runs southward or westward to avoid the prevailing northern winds.
The AC setup in Al Asalah
- 1
Standard bedroom or living room window
Most Al Asalah villas and blocks have standard-sized windows in bedrooms and living rooms, making window unit installation a straightforward and quick option.
- 2
Strong window frames in modern outer walls
Al Asalah's outer walls are built to modern standards and easily bear a window unit's weight, reducing the need for extra bracing.
- 3
Safe condensate drainage outward
The natural slope of windows and proper unit tilt allow safe water drainage outward clear of interior walls without complications.
Before the visit
Before our visit in Al Asalah
- 1
Measure your target window opening
Tell us the opening's dimensions (width, height, depth) before the visit, or arrange a free site measure to confirm the unit will fit.
- 2
Ensure the team can reach the outer window safely
Check that the window can be safely accessed from outside, and tell us if there are any obstacles or unusual height that need special care.
- 3
Clear the area around the window for work
Remove furniture, heavy curtains or anything in the way, and ensure there is power nearby to test the unit after installation.
More districts for Window AC installation
Other services in Al Asalah
FAQ
Questions about Window AC installation
Can you cut a new opening in the wall if there is none?
Yes, if no suitable opening exists we can cut one. At the survey we check the wall type and thickness and look for columns or cables that might be in the way, then agree the best position with you before any cutting begins.
Why does the outward tilt matter on a window unit?
A window unit produces condensate on its indoor side throughout operation. If the unit sits level or tilts inward, water pools in the base and runs down the inside wall. A slight outward tilt sends that water to the back of the unit and out, away from the wall and furniture.
How do you seal the gaps around the frame given Jeddah's climate?
Jeddah combines high heat, humidity and salty sea air, so sealing materials must hold up in those conditions. We use insulating and sealing materials suited to the opening and wall type, and the survey determines the right choice based on the gap size and wall construction.
Does a window unit need its own power point?
A window unit draws a high current at start-up, and sharing a socket with other appliances strains the wiring and trips the breaker. The technician checks at the survey that a suitable socket is close to the unit position, and if one is not there we explain what is needed before installation proceeds.
Does the weight of a window unit affect how it is fixed?
Yes, the unit's weight directly affects how the frame is fixed and what support is needed. A concrete wall requires different treatment from a brick wall, and a wide opening needs more support than a narrow one. The technician decides at the survey what fixing method and materials suit the unit and the wall.
Will the window openings in my villa fit a standard window unit?
We measure the opening free of charge before purchase and confirm the frame is sturdy and the wall thickness can bear the weight. In Al Asalah, most villas and blocks have standard openings that suit available units.
The northern winds are strong here, how do you seal a window unit against them?
We use flexible weatherstripping and high-grade silicone around every edge, and ensure the unit tilts slightly outward so condensate drains clear of your interior wall.
Will the intense summer heat affect how the unit is installed?
We install units during cooler times when possible, but quality weatherstripping and silicone withstand high temperatures. A firmly fixed frame and proper sealing ensure stable performance even at peak summer heat.
Does the coastal salt in the air damage the unit's metal parts?
Yes, salt speeds up corrosion on metal parts, so we choose units with salt-resistant coatings and ensure salty air cannot enter through loose gaps around the frame.
