Window unit fitted right
Window AC installation in Harat Al Sham
In Harat Al Sham, old downtown Jeddah, window AC installation in heritage villas and historic buildings demands respect for the structure and careful work. We preserve frame and wall integrity, seal completely against intense heat and dust, and ensure proper drainage.
- Firm frame
- Sealed gaps
- Outward drain
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
When a window unit is the right choice
- 1
A room with no outdoor unit space
Some rooms have no wall facing a suitable space for an outdoor unit. A window AC is the practical answer: one unit in the opening cools the room and expels heat directly outside.
- 2
An annex, staff housing or storeroom
Annexes, staff rooms and warehouses need real cooling without the cost of long copper and cable runs. A window unit suits these spaces well when the right opening exists or can be made.
- 3
An existing window of the right size
When a wall already has a window opening that matches the unit you have chosen, the frame fits straight in without cutting new concrete. We confirm at the survey that the opening suits the unit and the wall carries the load.
Who it's for
Need to cool a maid's room or home annex
We survey the opening or proposed wall in the annex, fit the unit in a secure frame and seal every gap so no hot humid air enters the space.
Ask on WhatsAppManaging a staff housing building that needs practical cooling
We survey each room and its existing openings, then install units in level frames with the correct outward tilt in every room as the survey findings direct.
Ask on WhatsApp
What the installation covers
- Opening and wall check
- Frame levelled and secured
- Gaps sealed with insulation
- Drainage tilt adjusted
- Unit started and tested
How we work
How we work
- 1
Send a photo
WhatsApp us a photo of the opening or the proposed wall and your district, so the technician arrives with the right frame and fixings.
- 2
Site survey
On site the technician measures the opening, checks the wall, confirms there is a suitable power point near the unit, and agrees with you on any changes needed before starting.
- 3
Fit and seal
We fit the frame level, set the unit with the correct outward tilt, then seal every gap around the frame so no hot air, dust or humidity enters.
- 4
Start-up and handover
We run the unit, check the cooling and confirm condensate flows outward, then leave the space clean and show you how to clean the filter.
Proper installation or just placing the unit?
| Alrabih | The usual way | |
|---|---|---|
| Frame | Level and firmly secured | Propped without fixing |
| Gaps | Sealed with insulating materials | Open or thin plastic |
| Tilt | Outward fall drains water | Level or tilted inward |
| Power | Dedicated nearby socket | Extension from another room |
| Site cleanliness | Space left clean | Dust and debris left behind |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Harat Al Sham is a unique historic district of very old villas and architectural heritage, with narrow traditional windows and heavy wooden or metal frames that may be heritage components, and thick earthen walls in some villas. Any external work must be extraordinarily careful to avoid damaging heritage value, and there may be government or local restrictions on modifications. Heat and dust here are severe due to narrow alleys and earthen walls that absorb heat.
Harat Al Sham is an ancient historic district in Jeddah's old downtown, home to heritage architectural villas, narrow alleys and very old residential buildings.
Window ACs are rare here because many heritage villas require special approvals for modifications, and the traditional narrow windows make each installation unique.
The AC setup in Harat Al Sham
- 1
Window unit in traditional narrow windows
Traditional windows in Harat Al Sham are very narrow, so we may need a specially small unit or a custom architectural solution for each villa.
- 2
Window units rare on thick earthen walls
Heritage villas with thick earthen walls need extremely careful mounting and preparation, and may not always be suitable for window ACs.
- 3
Reinforced sealing respecting heritage value
All sealing must be strong against heat and dust, but done reversibly or in ways that preserve original heritage materials.
Before the visit
Before our visit in Harat Al Sham
- 1
Obtain heritage and local planning approvals first
Confirm you have heritage and municipal approvals before booking the visit, as historic villas may need special permits.
- 2
Detailed photos of window, frame and wall
Send us clear photos from inside and out showing the frame, wall and window condition, and any historic carvings or details nearby.
- 3
Identify parking and access through narrow alleys
Tell us the nearest parking outside the alleys and describe the route from the main street to your villa to help the team navigate.
More districts for Window AC installation
Other services in Harat Al Sham
FAQ
Questions about Window AC installation
Can you cut a new opening in the wall if there is none?
Yes, if no suitable opening exists we can cut one. At the survey we check the wall type and thickness and look for columns or cables that might be in the way, then agree the best position with you before any cutting begins.
Why does the outward tilt matter on a window unit?
A window unit produces condensate on its indoor side throughout operation. If the unit sits level or tilts inward, water pools in the base and runs down the inside wall. A slight outward tilt sends that water to the back of the unit and out, away from the wall and furniture.
How do you seal the gaps around the frame given Jeddah's climate?
Jeddah combines high heat, humidity and salty sea air, so sealing materials must hold up in those conditions. We use insulating and sealing materials suited to the opening and wall type, and the survey determines the right choice based on the gap size and wall construction.
Does a window unit need its own power point?
A window unit draws a high current at start-up, and sharing a socket with other appliances strains the wiring and trips the breaker. The technician checks at the survey that a suitable socket is close to the unit position, and if one is not there we explain what is needed before installation proceeds.
Does the weight of a window unit affect how it is fixed?
Yes, the unit's weight directly affects how the frame is fixed and what support is needed. A concrete wall requires different treatment from a brick wall, and a wide opening needs more support than a narrow one. The technician decides at the survey what fixing method and materials suit the unit and the wall.
My villa is very old and historic, can you install a window AC without damaging it?
Yes, but we require careful inspection of the frame and wall first, and may need local approvals or heritage permits from the relevant authorities before starting.
Harat Al Sham's alleys are extremely narrow, how do you bring equipment to the villa?
Our team carries tools and equipment by hand through the narrow alleys, and we agree with you on the closest parking point outside the alley before the visit.
Do the thick earthen walls in a traditional villa affect window AC installation?
Yes, thick earthen walls require special preparation when drilling or mounting, but they provide excellent natural insulation against heat if we properly seal gaps around the frame.
Can a window AC fit in a very narrow traditional window?
It depends on the exact window dimensions; we may need a very small custom unit, or recommend an alternative like a split system or a window modification with heritage authorities' approval if available.
