Hotel and hospitality HVAC
Hotel HVAC in Al Rawabi
In Al Rawabi south of Jeddah, hotel and resort complexes spread across spacious gardens and separate buildings. Alrabih's hotel HVAC balances individual guest preferences with efficiency across green spaces and shared areas.
- Room quiet
- Individual control
- Non-disruptive maintenance
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
When a hotel needs a specialist
- 1
A new hotel or serviced apartments under construction
The right design starts before the ceilings are closed. We fix diffuser positions, duct routes and noise levels per room before finishing, so there is no costly breaking out or rerouting later.
- 2
Guests complaining about noise or smell
A loud fan coil, air whistling at a diffuser, or corridor smell entering the room when the door opens. These are diagnosable problems with a fix, after a site survey of the airflow.
- 3
Maintenance that disrupts hotel operations
A hotel never stops, and occupied rooms cannot accept a technician working through the night. We draw the maintenance plan with the hotel manager, using vacant rooms and quiet hours.
Who it's for
Opening a new hotel before fit-out is finished
We enter at the structural stage to fix duct routes and unit positions for every room before ceilings close, so you avoid costly changes later.
Ask on WhatsAppRunning an open hotel with ongoing guest complaints
We diagnose noise, odour and control faults in problem rooms and carry out repairs in vacant rooms without affecting staying guests.
Ask on WhatsApp
What the work covers
- Design for rooms and areas
- Supply and installation of units
- Ductwork to SMACNA standards
- Fresh air and odour control
- Preventive and corrective maintenance contracts
How we work
How we work
- 1
Survey and design
We visit the site, study the drawings and expected occupancy, and decide the right system type for each zone: rooms, lobby, halls and corridors.
- 2
Fabrication and supply
We fabricate ducts in our own workshop from G90 galvanised sheet to the site dimensions, and supply units from our authorised brands to the specifications the design sets.
- 3
Installation and sealing
We install units and ducts and test room noise levels before the ceilings close, using Armaflex and Kimmco insulation and Foster sealants to control condensation and air leakage.
- 4
Handover and maintenance plan
We commission the full system, verify individual control in every room, and hand hotel management a scheduled maintenance plan built around occupancy so guests are not disturbed.
Specialist hotel design or a generic fit-out?
| Alrabih | The usual way | |
|---|---|---|
| Room noise | Measured and set before close-up | Found after opening |
| Guest control | Independent per room | One zone per floor |
| Corridor odour | Planned fresh-air supply | Enters guest rooms |
| Maintenance | Scheduled with hotel management | When a technician is free |
| Corridor air quality | Calculated pressure stops infiltration | Relies on opening windows |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.

Split AC installation
Request this service
Duct installation
Request this service
Central AC installation
Request this service
Duct fabrication
Request this service
Cold room installation
Request this service
Electro-mechanical works
Request this service
Chiller & AHU installation
Request this service
HVAC design
Request this service
AC repair & faults
Request this service
AC cleaning
Request this service
Refrigerant charging
Request this service
Central AC maintenance
Request this service
Chiller maintenance
Request this service
AC removal & refitting
Request this service
Duct cleaning & sanitising
Request this service
AC servicing by brand
Request this service
Operation & maintenance contracts
Request this service
AHU maintenance
Request this service
Fridge & freezer service
Request this service
Cold rooms
Request this service
Display fridges & chillers
Request this service
Factory HVAC
Request this service
Warehouse HVAC
Request this service
Villa & home HVAC
Request this service
Hotel HVAC
Request this service
School HVAC
Request this service
Hospital HVAC
Request this service
Mosque HVAC
Request this service
Mall & retail HVAC
Request this service
Restaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.

What sets this district apart
Al Rawabi is a modern residential district with several hotels and resorts spread across large plots with rooms in separate buildings or pavilions, unlike central tower hotels. This distributed layout requires decentralised HVAC systems where each room cluster operates independently, and adds the challenge of maintaining cool airflow across exterior corridors and gardens without major loss, whilst managing moderate humidity from the green spaces and coastal air.
Al Rawabi is a modern district in south Jeddah, known for spacious green areas and scattered hotel and resort complexes.
Most hotels and resorts here are divided into separate pavilions, each with its own central cooling unit and independent thermostats per room.
The AC setup in Al Rawabi
- 1
Separate central units per pavilion
Each pavilion or separate building gets its own central cooling unit with internal ducts and independent control, allowing easy maintenance and separate operation.
- 2
Smaller units for lobbies and main entrances
The main lobby and administrative areas need smaller additional cooling units to ensure comfort in reception areas and reduce ambient moisture.
- 3
Robust outdoor fans for open corridors
Open corridors and passages between pavilions benefit from strong outdoor fans and natural ventilation backed by small units where required.
Before the visit
Before our visit in Al Rawabi
- 1
Map all pavilion and building locations
Send a site map showing all pavilions, separate buildings and shared areas before the first visit.
- 2
Confirm roof and outdoor access points
Confirm that all pavilion roofs are safely accessible and there are suitable locations for outdoor units on each building.
- 3
Schedule visits with hotel management
Since the complex is large, tell us times that won't disturb guests and staff, ideally splitting visits by pavilion or building for efficiency.
More districts for Hotel HVAC
Other services in Al Rawabi
FAQ
Questions about Hotel HVAC
What unit type suits hotel guest rooms in Jeddah?
It depends on the building layout, number of floors and running-cost priorities. Fan coil units on a chilled-water system are common in larger hotels; serviced apartments often suit split or cassette units. The survey decides what fits, and both options are available through our authorised brands: Carrier, YORK, General, Midea, Gree and Smart Gold.
How do you handle Jeddah's humidity in corridors and shared areas?
Indoor corridors face humid outside air every time a door opens. We calculate the fresh-air volume for each zone and check that internal pressure stops warm, humid outside air from infiltrating. Ducts are insulated with Kimmco and Armaflex materials to stop condensation forming on the outside of the duct.
Can you service one room without cutting air conditioning to the rest of the floor?
In most systems designed for hotels, yes. Each unit or circuit serves a limited set of rooms and can be isolated on its own. We build this zoning into the design specifically so that neighbouring rooms stay live during any maintenance work, and the zoning is confirmed at the design stage before installation.
Do you work in the hotel while it is open to guests?
Yes, and we are familiar with coordinating around hotel operations. We agree in advance which rooms are set aside for maintenance, and we work at hours that avoid guest peak times. Any task that produces noise is reviewed with the hotel manager before it is scheduled.
How do you maintain stable room temperature when guests change and doors open frequently?
Frequent door opening upsets the pressure balance in a guest room and lets warm, humid corridor air in. We size each unit to the actual room dimensions, not the building as a whole, and balance the fresh-air supply against the return air for each room. A site survey determines the layout of individual controls and the dampers needed to isolate each room from corridor pressure changes.
How do you support hotels spread across separate pavilions?
We install separate central cooling units for each pavilion or building cluster, with a unified control system so hotel management can monitor all wings from one point if needed.
Do exterior corridors and gardens need cooling, and how do you handle them?
Exterior corridors benefit from good ventilation and light cooling as needed, so we recommend strong outdoor fans and natural ventilation systems backed by small units where necessary.
Do gardens and green spaces increase humidity and affect your cooling system?
Yes, green areas combined with coastal humidity raise moisture levels, so we design dehumidification units with higher capacity and maintain filters and dryers regularly.
Do separate pavilions need individual electrical supplies for each AC unit?
Yes, each central AC unit needs its own electrical circuit and safe grounding, which we coordinate with the hotel and electrical contractor to ensure circuit adequacy.












































































