Window unit fitted right
Window AC installation in Al Manarat
In Al Manarat, far north Jeddah, window AC is a quick solution for residential units and small hotels. Proper installation means levelling the frame, tight sealing against sea winds, salt and humidity, and precise outward tilt to drain condensate away from walls.
- Firm frame
- Sealed gaps
- Outward drain
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
When a window unit is the right choice
- 1
A room with no outdoor unit space
Some rooms have no wall facing a suitable space for an outdoor unit. A window AC is the practical answer: one unit in the opening cools the room and expels heat directly outside.
- 2
An annex, staff housing or storeroom
Annexes, staff rooms and warehouses need real cooling without the cost of long copper and cable runs. A window unit suits these spaces well when the right opening exists or can be made.
- 3
An existing window of the right size
When a wall already has a window opening that matches the unit you have chosen, the frame fits straight in without cutting new concrete. We confirm at the survey that the opening suits the unit and the wall carries the load.
Who it's for
Need to cool a maid's room or home annex
We survey the opening or proposed wall in the annex, fit the unit in a secure frame and seal every gap so no hot humid air enters the space.
Ask on WhatsAppManaging a staff housing building that needs practical cooling
We survey each room and its existing openings, then install units in level frames with the correct outward tilt in every room as the survey findings direct.
Ask on WhatsApp
What the installation covers
- Opening and wall check
- Frame levelled and secured
- Gaps sealed with insulation
- Drainage tilt adjusted
- Unit started and tested
How we work
How we work
- 1
Send a photo
WhatsApp us a photo of the opening or the proposed wall and your district, so the technician arrives with the right frame and fixings.
- 2
Site survey
On site the technician measures the opening, checks the wall, confirms there is a suitable power point near the unit, and agrees with you on any changes needed before starting.
- 3
Fit and seal
We fit the frame level, set the unit with the correct outward tilt, then seal every gap around the frame so no hot air, dust or humidity enters.
- 4
Start-up and handover
We run the unit, check the cooling and confirm condensate flows outward, then leave the space clean and show you how to clean the filter.
Proper installation or just placing the unit?
| Alrabih | The usual way | |
|---|---|---|
| Frame | Level and firmly secured | Propped without fixing |
| Gaps | Sealed with insulating materials | Open or thin plastic |
| Tilt | Outward fall drains water | Level or tilted inward |
| Power | Dedicated nearby socket | Extension from another room |
| Site cleanliness | Space left clean | Dust and debris left behind |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Al Manarat is a coastal area right beside the sea, home to small hotels, furnished flats and short-term residential units. Windows here face strong sea winds, salt spray and high humidity year-round, so sealing must be extremely tight at every corner to resist infiltration. Window ACs here need more frequent maintenance because salt deposits on metal and insulation parts quickly.
Al Manarat sits at far north Jeddah's coastal edge, home to small hotels and furnished flats very close to the sea.
Most Al Manarat units have sea-facing windows requiring salt and marine-humidity resistant sealing much stronger than inland areas.
The AC setup in Al Manarat
- 1
Window AC sealed tight against sea and salt
Installation in Al Manarat focuses on multi-layer sealing resistant to salt and marine humidity.
- 2
Stainless-steel brackets resistant to rust and corrosion
All fastening components and metals around the window are stainless steel or salt-resistant material.
- 3
Precise tilt with protected drainage point
The tilt ensures condensate drains away, and the drainage opening is protected from salt and marine debris build-up.
Before the visit
Before our visit in Al Manarat
- 1
Test the window opens from inside and out
Confirm the window frame moves freely from inside and out, with no obstructions or excessive dampness around the opening.
- 2
Provide safe external access for the team
If the window is high or faces the sea directly, ensure there is safe scaffolding or stairs the team can stand on.
- 3
Clear furniture and curtains before the visit
Move all furniture, curtains and decorations from the window area inside so the team can work safely and comfortably.
More districts for Window AC installation
Other services in Al Manarat
FAQ
Questions about Window AC installation
Can you cut a new opening in the wall if there is none?
Yes, if no suitable opening exists we can cut one. At the survey we check the wall type and thickness and look for columns or cables that might be in the way, then agree the best position with you before any cutting begins.
Why does the outward tilt matter on a window unit?
A window unit produces condensate on its indoor side throughout operation. If the unit sits level or tilts inward, water pools in the base and runs down the inside wall. A slight outward tilt sends that water to the back of the unit and out, away from the wall and furniture.
How do you seal the gaps around the frame given Jeddah's climate?
Jeddah combines high heat, humidity and salty sea air, so sealing materials must hold up in those conditions. We use insulating and sealing materials suited to the opening and wall type, and the survey determines the right choice based on the gap size and wall construction.
Does a window unit need its own power point?
A window unit draws a high current at start-up, and sharing a socket with other appliances strains the wiring and trips the breaker. The technician checks at the survey that a suitable socket is close to the unit position, and if one is not there we explain what is needed before installation proceeds.
Does the weight of a window unit affect how it is fixed?
Yes, the unit's weight directly affects how the frame is fixed and what support is needed. A concrete wall requires different treatment from a brick wall, and a wide opening needs more support than a narrow one. The technician decides at the survey what fixing method and materials suit the unit and the wall.
Sea salt accumulates on my AC; does this damage the unit?
Yes, salt causes rapid corrosion of metal parts. At installation we seal every gap with salt-resistant material, and we recommend more frequent cleaning here.
Windows here are near the sea with strong winds; how do you secure the unit safely?
We use stainless-steel brackets and bolts anchored firmly in the window frame and wall, and check stability before closing the window.
Humidity and sea mist seep around the window; is sealing enough?
We apply salt-resistant flexible sealant to every gap between frame and wall, plus an extra insulating layer around the AC unit's edges to prevent infiltration.
The unit drains onto the external balcony; is the tilt sufficient in this high humidity?
Outward tilt ensures condensate drains away from the wall, but in Al Manarat we recommend cleaning the drainage opening every two months to prevent salt and debris blockages.
