Medical facility HVAC
Hospital HVAC in Al Aqeeq
In Al Aqeeq, north Jeddah, hospital cooling systems demand precision because any stoppage in an operating theatre or ICU poses patient safety risk. Alrabih designs systems from each department's needs and building survey, and carries out maintenance without closing wards.
- Per-department ventilation
- Maintenance without shutdown
- Survey-based design
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
When you need a medical HVAC specialist
- 1
Hospital or clinic under construction
The right design starts before any duct is installed, because ventilation and filtration needs differ from the surgical suite to the waiting area. An early survey saves costly alterations after the building is finished.
- 2
Departments reporting warm air or odours
In an existing medical building, weak cooling in one department or odours crossing into an adjacent area signals an imbalance in the air distribution or extraction system. Finding the cause needs measurement, not guesswork.
- 3
Maintenance contract for a running facility
A hospital does not close for equipment servicing. We schedule preventive maintenance visits department by department, coordinated with facility management, and carry out repairs with the smallest possible effect on daily operations.
Who it's for
Building a new hospital or medical centre
We survey the building early and design systems to each department's requirements before installation begins.
Ask on WhatsAppYour clinic has repeated cooling faults
We inspect the existing systems, find the root cause of recurring faults, and repair them without stopping the clinic.
Ask on WhatsApp
What the service covers
- Building survey and requirements
- Duct network and AHU design
- Installation commissioning and testing
- Preventive and corrective contracts
- Maintenance without stopping departments
How we work
How we work
- 1
Survey and requirements
We visit the facility, map the heat loads and air requirements for each department, and agree the duct routes before any design work begins.
- 2
Design and supply
We design the duct network and fabricate it in our own workshop to SMACNA specifications, and supply units from our authorised brands: Carrier, YORK, General, Midea, Gree and Smart Gold.
- 3
Phased coordinated installation
In operating buildings we work with management to phase the installation so adjacent departments stay open, and control dust and noise away from patient areas.
- 4
Commissioning and follow-up
We commission the systems, measure airflow in each department, and adjust the dampers until the design requirements are met, then hand over the facility with a maintenance plan.
Survey-based design or an off-the-shelf solution?
| Alrabih | The usual way | |
|---|---|---|
| Design basis | Each department surveyed separately | One solution for the whole building |
| Ventilation and extract | Tailored to each space's function | Unbalanced between departments |
| Maintenance | Without closing departments | Full work stoppage |
| Ductwork | Fabricated in-house to SMACNA spec | Off-the-shelf non-compliant ducts |
| Copper runs | Mueller, no welded joints | Many welded joints |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Hospitals in Al Aqeeq and the northern zones are relatively new-built and house multiple departments across large areas with complex floor plans, demanding an efficient centralised cooling network spread across many levels. Each ward has different climate needs: operating theatres require precise temperature and humidity control, intensive care needs specific air pressure, and other wards have less demanding specs. Regular maintenance and continuous monitoring are vital to keep the system running without stoppage year-round.
Al Aqeeq lies in north Jeddah, a zone of recent urban development with broad commercial, medical and residential blocks and large public halls.
Central cooling systems in hospitals manage high airflow rates and variable pressures by medical department, and require precise mechanical and electronic monitoring.
The AC setup in Al Aqeeq
- 1
Centralised system with zoned control
Modern hospitals in Al Aqeeq run a centralised cooling network distributed across floors with separate controls per ward to ensure each department gets its required climate.
- 2
High-capacity outdoor condensers on hospital roofs
The broad roofs of modern hospitals in the zone provide ample space for powerful condensers that cover the high cooling demand across all departments.
- 3
Advanced air filters and insulated ducts
Distributed ducts are insulated to prevent heat loss, and high-efficiency filters protect the system and patients from dust and contaminants.
Before the visit
Before our visit in Al Aqeeq
- 1
List the hospital's priority departments
Tell us which departments have the highest priority for urgent maintenance, such as operating theatres and ICUs, so we plan the visit to minimise any impact on medical work.
- 2
Coordinate with hospital administration and in-house maintenance
Ensure hospital administration and in-house maintenance staff agree on the visit time and any restrictions on accessing sensitive areas.
- 3
Confirm access to roofs and main ductwork
Verify that our team can safely reach hospital roofs and the areas housing main ducts and condensers before the visit day.
More districts for Hospital HVAC
Other services in Al Aqeeq
FAQ
Questions about Hospital HVAC
How do ventilation needs differ across hospital departments?
Ventilation needs vary from one department to the next based on the activity in each area and the requirements set by the facility's designer and the site survey. Operating theatres need highly filtered, directionally controlled air, while patient rooms, corridors and administrative areas each carry different requirements. We build the duct network and select units from the facility's drawings and its specific requirements, not from general assumptions.
Can systems be maintained without stopping sensitive departments?
Yes, but it requires careful planning before the maintenance date. We agree with facility management on a schedule that names the section and the right time window, then isolate the target section using dampers and blanking plates without affecting adjacent departments. Corrective tasks such as replacing a capacitor or repairing a flare joint are carried out within the agreed time window.
What governs duct network design in a medical building?
Design is governed by the approved facility drawings and each department's requirements as defined by the site survey and the specialist designer. We fabricate ducts in our own workshop from G90 galvanised sheet to project dimensions, and use Kimmco and Armaflex insulation with Foster sealants to control leakage. Distribution and pressure in each section follow the specifications drawn for that department individually.
What governs duct network design in a medical building?
Design is governed by the approved facility drawings and each department's requirements as defined by the site survey and the specialist designer. We fabricate ducts in our own workshop from G90 galvanised sheet to project dimensions, and use Kimmco and Armaflex insulation with Foster sealants to control leakage. Distribution and pressure in each section follow the specifications drawn for that department individually.
Do you work with small clinics or only hospitals?
We work with medical facilities of all sizes, from a clinic in a residential district to a multi-storey medical complex. The size of the facility does not change the principle: the site survey is the starting point, and from it we determine unit types, duct dimensions and fresh-air requirements for each zone. Preventive and corrective maintenance contracts are available for clinics and hospitals alike.
How do you design an AC system for a hospital with different wards?
We assess each ward separately: operating theatres and ICUs need strict temperature and humidity control, whilst other wards need general comfort. We design a distributed central network with separate control for each zone.
Does hospital maintenance require closing wards during the working day?
No, we carry out maintenance without closing wards, working gradually on parts of the system while keeping cooling active across the rest of the building. Patients and staff stay in a controlled environment at all times.
Does dust and the northern zone's climate affect system efficiency?
Yes, high summer heat and humidity put strain on the system's condensers, and dust collects on filters. We set up intensive regular maintenance schedules during hot and humid months.
Do hospital electrical wiring and connections need special checking?
Yes, hospitals house sensitive medical equipment that demands stable power supply. We check the electrical circuits feeding the AC system and verify there is no voltage fluctuation that could damage medical devices.
