Retail cooling without downtime
Mall & retail HVAC in Al Shara'i
Al Shara'i in north-east Jeddah is growing quickly with modern shops and specialist retail, each needing HVAC that balances Jeddah's intense heat against internal condensation. Alrabih installs systems that keep both goods and customers safe all day.
- Separate tenants
- Rooftop packaged
- Off-hours service
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
When you need a retail HVAC specialist
- 1
A new mall or shopping centre
A poor design from the start means cold zones next to stifling ones and endless tenant complaints. We study the heat load of each zone separately and choose the right unit type before the ceiling is built.
- 2
An existing shop with uneven cooling
The back of the shop is cold while the front near the door stays hot at peak hours. The cause is usually the air outlet layout or the unit size; a site survey identifies which and fixes the problem without replacing the whole system.
- 3
Condensate dripping on shelves or display
A single drip on stock or a glass display front damages the product and the shop's image. The cause is usually weak insulation, a blocked condensate line or an unlevel unit, all of which can be diagnosed and fixed in one visit.
Who it's for
Opening a new shop inside a mall
We design an independent unit for your space and install ductwork and condensate lines before finishing work so your opening is not delayed.
Ask on WhatsAppManaging an existing commercial complex
We review the existing system and set a preventive and corrective maintenance contract scheduled outside trading hours so tenants are not affected.
Ask on WhatsApp
What our mall and retail work covers
- Heat load study per zone
- Rooftop packaged unit installation
- Independent units per tenant
- Ductwork from our workshop
- Maintenance contracts off peak
How we work
How we work
- 1
Site survey and loads
We visit the site and map every heat source: entrances, lighting, expected crowd density and facade orientation, then size the units correctly for each section.
- 2
Design and materials
We design the duct network in our own workshop from G90 galvanised sheet to dimensions that give even air distribution, and select units from brands we distribute such as Carrier, YORK and Gree.
- 3
Installation coordinated on site
We coordinate installation with the project programme so ductwork does not delay finishing trades, and run Mueller copper in runs of up to 30 metres without welded joints to reduce potential leak points.
- 4
Start-up and maintenance contract
We start up the system and check air distribution in every section, then set a preventive and corrective maintenance schedule timed so work never overlaps with the shop's trading hours.
Designed for the space or just fitted?
| Alrabih | The usual way | |
|---|---|---|
| Air distribution | Load study per zone | One unit for the whole space |
| Ductwork | G90 sheet, sized for the job | Off-the-shelf wrong size |
| Condensate | Dedicated line away from stock | Risk of drips on shelves |
| Maintenance | Scheduled outside shop hours | Surprise outage during trade |
| Copper purity | Mueller copper, 99% pure, no welds | Unspecified pipe source |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Al Shara'i is a new-growth area where shops sit spaced between residential zones and vacant land, so buildings do not benefit from shading by neighbors. Shops here have large glass frontages and doors opening straight onto hot streets, letting severe daytime heat in. HVAC systems need high capacity and tight humidity control to stop condensation on goods and front glass.
Al Shara'i is in north-east Jeddah, a new-growth district with spaced-out shops and open land under direct sun exposure.
Independent shops in Al Shara'i typically use high-capacity package units or multiple split units because of the heavy thermal load from glass frontages and open doors.
The AC setup in Al Shara'i
- 1
Heavy-duty package units on roof or side
Standalone shops in Al Shara'i rely on one or more package units on roof or external wall, providing direct cooling without complex ductwork.
- 2
Multiple splits distributed through the space
Smaller and medium shops may use separate split units in different spots to ensure even cooling without strong draughts.
- 3
Systems with integrated dehumidification
Because of the gap between outdoor heat and indoor cooling, we install units with built-in humidity control to prevent condensation on goods and glass.
Before the visit
Before our visit in Al Shara'i
- 1
Confirm the best spot for the outdoor unit
In Al Shara'i, outdoor units usually go on the roof or rear wall away from the shop front. Let us know your preferred location and available space before we visit.
- 2
Confirm heavy-duty electrical supply is available
Heavy-duty outdoor units need robust electrical supply with proper circuit protection. Check that your electrical panel can support the extra load before installation day.
- 3
Agree on an installation schedule that does not close the shop
Installation may take several hours, so agree with us on a day and time that does not affect your opening hours or force an unnecessary closure.
More districts for Mall & retail HVAC
Other services in Al Shara'i
FAQ
Questions about Mall & retail HVAC
How do you handle doors that open onto the street all day?
An open door pushes in hot humid air and spikes the heat load suddenly. We include that load in the design and direct a supply outlet above the entrance to form an air barrier that reduces mixing. The survey confirms which arrangement suits each specific doorway.
Do you install separate units for each mall tenant?
Yes. A separate unit per tenant means each shop controls its own cooling and a fault in one unit does not affect the neighbour. It also makes consumption readings straightforward and makes maintenance responsibility clear for each party.
Why do you prefer rooftop packaged units for malls?
A rooftop packaged unit keeps the condenser and evaporator in one casing above the roof, freeing every inch of shop floor from outdoor units and shortening the duct run. Maintenance happens on the roof without entering the shop, which fits scheduling work outside trading hours.
How do you handle Jeddah's heat and its effect on rooftop units?
Rooftop units in Jeddah work in hot, salty and dusty air that strains the condenser and speeds fin corrosion. We specify units with corrosion-resistant coatings and include coil cleaning and compressor and condenser checks in the preventive schedule of every maintenance contract.
Does air distribution design differ between a small shop and a large mall?
The site survey decides. A small shop may need only a concealed unit with directional grilles, while a mall requires a duct network with dampers zoned by area. In both cases the positions of lighting, visitor traffic and entry doors are recorded before supply outlets are placed.
Sun hits our shop directly, how do you handle such intense heat?
We install outdoor units strong enough to keep pace with the constant heat from direct sun and large glass, and add robust filtration to maintain indoor air quality throughout the day.
The large glass frontage causes condensation, is that normal?
In Al Shara'i, where outside air is hot and inside is cooled hard, condensation on glass can occur. We manage this by tuning relative humidity precisely and directing air streams so they do not hit the glass directly.
Empty land surrounds our shop, does ground heat affect the system?
Yes, bare soil and tarmac absorb and radiate heat, increasing the load on your HVAC. We size the outdoor units for this and position them away from sun-exposed areas as far as possible.
Our shop is small and space is tight, can a powerful system be fitted safely?
Yes, we use compact package units or multiple splits instead of central systems, and layout the air flow so cooling spreads efficiently through the tight space without draughts on customers.
