Window unit fitted right
Window AC installation in Al Sharafiyah
Window AC installation in Al Sharafiyah demands precision in levelling the frame and sealing gaps against Jeddah's heat, salt air and dust. Alrabih's team ensures safe mounting and the correct outward tilt to drain condensate away from your interior walls.
- Firm frame
- Sealed gaps
- Outward drain
Clients We're Proud to Serve
Organisations and companies that trusted Alrabih with their projects.
When a window unit is the right choice
- 1
A room with no outdoor unit space
Some rooms have no wall facing a suitable space for an outdoor unit. A window AC is the practical answer: one unit in the opening cools the room and expels heat directly outside.
- 2
An annex, staff housing or storeroom
Annexes, staff rooms and warehouses need real cooling without the cost of long copper and cable runs. A window unit suits these spaces well when the right opening exists or can be made.
- 3
An existing window of the right size
When a wall already has a window opening that matches the unit you have chosen, the frame fits straight in without cutting new concrete. We confirm at the survey that the opening suits the unit and the wall carries the load.
Who it's for
Need to cool a maid's room or home annex
We survey the opening or proposed wall in the annex, fit the unit in a secure frame and seal every gap so no hot humid air enters the space.
Ask on WhatsAppManaging a staff housing building that needs practical cooling
We survey each room and its existing openings, then install units in level frames with the correct outward tilt in every room as the survey findings direct.
Ask on WhatsApp
What the installation covers
- Opening and wall check
- Frame levelled and secured
- Gaps sealed with insulation
- Drainage tilt adjusted
- Unit started and tested
How we work
How we work
- 1
Send a photo
WhatsApp us a photo of the opening or the proposed wall and your district, so the technician arrives with the right frame and fixings.
- 2
Site survey
On site the technician measures the opening, checks the wall, confirms there is a suitable power point near the unit, and agrees with you on any changes needed before starting.
- 3
Fit and seal
We fit the frame level, set the unit with the correct outward tilt, then seal every gap around the frame so no hot air, dust or humidity enters.
- 4
Start-up and handover
We run the unit, check the cooling and confirm condensate flows outward, then leave the space clean and show you how to clean the filter.
Proper installation or just placing the unit?
| Alrabih | The usual way | |
|---|---|---|
| Frame | Level and firmly secured | Propped without fixing |
| Gaps | Sealed with insulating materials | Open or thin plastic |
| Tilt | Outward fall drains water | Level or tilted inward |
| Power | Dedicated nearby socket | Extension from another room |
| Site cleanliness | Space left clean | Dust and debris left behind |
Everything your AC needs, from one team
From system design and duct fabrication to installation, commissioning and maintenance.
Split AC installation
Request this serviceDuct installation
Request this serviceCentral AC installation
Request this serviceDuct fabrication
Request this serviceCold room installation
Request this serviceElectro-mechanical works
Request this serviceChiller & AHU installation
Request this serviceHVAC design
Request this serviceAC repair & faults
Request this serviceAC cleaning
Request this serviceRefrigerant charging
Request this serviceCentral AC maintenance
Request this serviceChiller maintenance
Request this serviceAC removal & refitting
Request this serviceDuct cleaning & sanitising
Request this serviceAC servicing by brand
Request this serviceOperation & maintenance contracts
Request this serviceAHU maintenance
Request this serviceFridge & freezer service
Request this serviceCold rooms
Request this serviceDisplay fridges & chillers
Request this serviceFactory HVAC
Request this serviceWarehouse HVAC
Request this serviceVilla & home HVAC
Request this serviceHotel HVAC
Request this serviceSchool HVAC
Request this serviceHospital HVAC
Request this serviceMosque HVAC
Request this serviceMall & retail HVAC
Request this serviceRestaurant & cafe HVAC
Request this service
Some of our work
Ductwork, rooftop units and diffusers, from work we've completed in Jeddah.
Customer reviews
What our customers say
- Muhammadramzan 2641
“MashaaAllah. Services are so good. Behaviour and kindness 100/100. Prices are less then Market. Fully recommended”
- shahzeb armani
“Wow. Prices are so comfortable. Outstanding services. People are so talented and nice”
- Tawfik AlyawerLocal Guide
“U can find all u need for air conditioning”
Your satisfaction matters to us! If you had a great experience with us, we'd love a 5-star rating and a kind review.
Worked with us? Leave a reviewService areas
We come to you anywhere in Jeddah
From Al Shiraa and Al Yaqout in the north to Al Thaghr and Al Quraiyat in the south, with our base in Al Aziziyah.
What sets this district apart
Al Sharafiyah is a medium-density residential district with flats, small villas and some ground-floor shops, many built in different periods with varying window sizes and frame strengths. Window unit installation here needs careful pre-mount frame inspection and robust sealing against moisture and dust, since the area lies near coastal zones. The correct outward tilt is crucial to prevent condensate leaking into flat or shop walls.
Al Sharafiyah sits in central Jeddah, mixing residential flats, small commercial shops and modest villas across varied building ages.
The flats and balcony windows in Al Sharafiyah accommodate small to medium window units, and their frames often need reinforcement before mounting.
The AC setup in Al Sharafiyah
- 1
Small window units on flat windows
Most Al Sharafiyah flats have small windows for window units of 1.5 to 2 tons capacity, with standard metal frames.
- 2
Balcony windows in modest villas
Small villas in the district have wider balcony windows that allow for medium window units to be fitted more easily.
- 3
Simple shop windows on ground floors
Commercial shops typically need sturdy window units on stronger frames, sometimes requiring extra bracing due to heavier use.
Before the visit
Before our visit in Al Sharafiyah
- 1
Check the frame and window strength
Inspect the window frame and make sure it is free of rust or cracks before the visit date.
- 2
Clear the space around the window
Make sure there are no objects hanging from the window inside or out, and the path from the street to the window is safe.
- 3
Prepare safe access for the team
Tell us whether the window is on an upper or ground floor, and whether access is from the street, inside the flat, or from a balcony.
More districts for Window AC installation
Other services in Al Sharafiyah
FAQ
Questions about Window AC installation
Can you cut a new opening in the wall if there is none?
Yes, if no suitable opening exists we can cut one. At the survey we check the wall type and thickness and look for columns or cables that might be in the way, then agree the best position with you before any cutting begins.
Why does the outward tilt matter on a window unit?
A window unit produces condensate on its indoor side throughout operation. If the unit sits level or tilts inward, water pools in the base and runs down the inside wall. A slight outward tilt sends that water to the back of the unit and out, away from the wall and furniture.
How do you seal the gaps around the frame given Jeddah's climate?
Jeddah combines high heat, humidity and salty sea air, so sealing materials must hold up in those conditions. We use insulating and sealing materials suited to the opening and wall type, and the survey determines the right choice based on the gap size and wall construction.
Does a window unit need its own power point?
A window unit draws a high current at start-up, and sharing a socket with other appliances strains the wiring and trips the breaker. The technician checks at the survey that a suitable socket is close to the unit position, and if one is not there we explain what is needed before installation proceeds.
Does the weight of a window unit affect how it is fixed?
Yes, the unit's weight directly affects how the frame is fixed and what support is needed. A concrete wall requires different treatment from a brick wall, and a wide opening needs more support than a narrow one. The technician decides at the survey what fixing method and materials suit the unit and the wall.
My window frame is old, can it hold the weight of a window unit?
We inspect the frame first to see if it can hold the load or needs reinforcement with additional metalwork before installation.
My street is narrow and my car is near the window, how do you fit the unit?
We need safe working space around the window, so tell us in advance if you need to move your car or coordinate the timing.
Coastal humidity and salt air affect the unit, is there extra protection?
We apply robust sealing around the frame to protect against moisture and salt, and fit insulating pads to reduce thermal leakage and air gaps.
Does condensate drainage need extra piping?
The correct outward tilt of the unit is the main solution, and condensate flows out by gravity; only in rare cases do we add simple piping if needed.
